Asus Vb175dl User Guide

2-
2.1	 Adjusting	 the 	 monitor
•  For optimal viewing, we recommend that you look at the full face of the monitor, 
then adjust the monitor to the angle that is most comfortable for you.
•  Hold the stand to prevent the monitor from falling when you change its angle.
• 
 
-5º~15º 
100mm
45º        
0º
You can tilt the monitor’s from -5º to 15º, swivel from left-to-right for 45º each side,  
and lift the monitor’s height for about 100mm.
45º        
ASUS LCD Monitor VB195(x)L / VB175(x)L  Series
 

2-2Chapter 2: Setup
2.2	 Detaching 	 the 	 arm/stand 		
	 (for	 VESA 	 wall 	 mount)

The  detachable  stand  of the VB195(x)L / VB175(x)L  Series  LCD  monitor  is  specially 
designed  for V
ESA wall mount. 
•   We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent damage to the monitor. 
•  Hold the stand of the monitor when you remove the screws. 
To detach the arm/stand: 
.   Lower the monitor to its lowest height, and then inset the monitor heigh\
t adjustment...

3-

3.1	 OSD	 (On-Screen 	 Display) 	 menu 	
3.1.1	 How	 to 	 reconfigure
.   Press the MENU button to activate  
the OSD menu. 
                   
          
2.  Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press + and - again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the MENU button.  
3.  Press  and...

3-2Chapter 3: General Instruction  

2.	 Image 	
 You can adjust brightness, contrast,  
sharpness, saturation,position (VGA  
only), and focus (VGA only) from  
this main function. 
 
 •  
 Brightness: the adjusting range is from 0 to   00.   is a hotkey to    
 activate this function.
 •   Contrast: the adjusting range is from 0 to   00.
 •   Sharpness: the adjusting range is from 0 to   00.
 •   Saturation: the adjusting range is from 0 to 00. 
Swith ON or OFF THE ASCR...

3-3

5.	 System 	 Setup 	
 Allow you to adjust the system.
 •  
 Volume: the adjusting range is from 0 to   00.  is a hotkey to activate  
 this function. 
 •   OSD Setup: adjusts the horizontal postition (H-Position) and     
 the vertical position (V-Position) of the OSD. The adjusting range is     
 from 0 to   00. In the OSD Timeout selection, you can adjust the     
 OSD timeout from   0 to   20.For DDC/CI setting, you can switch ON or OFF. 
 •   Language: there are ten...

3-4Chapter 3: General Instruction  
Specifications summary
*Specifications	are	subject	to	change	without	notice.
 
3.2
ModelVB195TL/NL/SL/DL VB175TL/NL/SL/DL
PanelSize19 17
Max.ResolutionSXGA 1280x1024 SXGA 1280x1024
Brightness(Typ.)250 250
Contrast
Ration(Typ.)50000:1
50000:1
ViewingAngle
(H/V),CR ≥10170/160170 /160
DisplayColors16.7M 16.7M
ResponseTime5ms (Tr+Tf)5ms (Tr+Tf)
Analog inputYesYes
Digital inputDVI (VB195TL/NL only)
Speaker(Built-in)1Wx2 (VB195TL/SL only)
Tilt+15°~ -5°
VESAwallmount100 x...

3-5

3.3   Troubleshooting (FAQ)
ProblemPossible 	 Solution
Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED lights amber and there is no screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly       connected the monitor and the computer. •  Inspect the signal cable and make sure      none of...

3-
6
Chapter 3: General Instruction  

3.4
 Supported operating modes

*
	
Modes
	
not
	
listed
	
in
	
the
	
above
	
tables
	may
	
not
	
be
	supported.
	
For
	
optimal
	resolution,
	
we
	
recommend
	
that
	you
	choose
	a
	mode
	listed
	in
	the
	above
	tables

 
Standard Resolution Frequency Horizontal Frequency (KHz)Pixel (MHz) 
640x480@60Hz 31.469 25.175 
640x480@72Hz 37.861 31.5 VGA 
640x480@75Hz 37.5 31.5 
800x600@56Hz 35.156 36 
800x600@60Hz 37.879 40 
800x600@72Hz 48.077 50 
SVGA 
800x600@75Hz...