Asus Vb175d User Guide

2-

2.1	 Adjusting	 the 	 monitor
•  For optimal viewing, we recommend that you look at the full face of the monitor, 
then adjust the monitor to the angle that is most comfortable for you.
•  Hold the stand to prevent the monitor from falling when you change its angle.
•  You can adjust the monitor’s angle from  -5º to 20º.
 
  -5º~20º

ASUS LCD Monitor VB195/ VB191/ VB175/ VB171 Series
 

2-2Chapter 2: Setup
2.2	 Detaching 	 the 	 arm/stand 		
	 (for	 VESA 	 wall 	 mount)

The  detachable  stand  of the VB195/ VB191/ VB175/ VB171 Series  LCD  monitor  is 
specially designed  for V
ESA wall mount. 
To detach the arm/stand: 
 .   Remove the arm cover.
2.  Have the front of the monitor face down on a table. 
3.  Use a screwdriver to remove the three screws on the stand of the monitor as 
the below drawing shows.
4.  Detach the arm from the monitor. 
•  We  recommend  that  you  cover...

3-

3.1	 OSD	 (On-Screen 	 Display) 	 menu 	
3.1.1	 How	 to 	 reconfigure
.   Press the MENU button to activate  
the OSD menu. 
                   
          
2.  Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press + and - again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the MENU button.  
3.  Press  and...

3-2Chapter 3: General Instruction  

2.	 Image 	
 You can adjust brightness, contrast,  
sharpness, saturation,position (VGA  
only), and focus (VGA only) from  
this main function. 
 
 •  
 Brightness: the adjusting range is from 0 to   00.   is a hotkey to    
 activate this function.
 •   Contrast: the adjusting range is from 0 to   00.
 •   Sharpness: the adjusting range is from 0 to   00.
 •   Saturation: the adjusting range is from 0 to 00. 
Swith ON or OFF THE ASCR...

3-3

5.	 System 	 Setup 	
 Allow you to adjust the system.
 •  
 Volume: the adjusting range is from 0 to   00.  is a hotkey to activate  
 this function. 
 •   OSD Setup: adjusts the horizontal postition (H-Position) and     
 the vertical position (V-Position) of the OSD. The adjusting range is     
 from 0 to   00. In the OSD Timeout selection, you can adjust the     
 OSD timeout from   0 to   20.For DDC/CI setting, you can switch ON or OFF. 
 •   Language: there are ten...

3-4Chapter 3: General Instruction  
Specifications summary
*Specifications	are	subject	to	change	without	notice.
 
3.2
Model VB195T/S/D/N VB191T/S/D VB171T/S/D VB175T/S/D/N
Panel Size 19
191717
Max. Resolution SXGA 1280x1024 SXGA 1280x1024 SXGA 1280x1024 SXGA 1280x1024
Brightness(Typ.) 250
300300250
Ct t1000 1(VB171T/S)Contrast
Ration(Typ.) 50000:1
1000:11000:1(VB171T/S),
700:1 (VB171D) 50000:1
Viewing Angle (H/V), CR ≥10 170/160
170/160160/160170/160
Display Colors 16.7M
16.7M16.7M16.7M
Response Time...

3-5

3.3   Troubleshooting (FAQ)
ProblemPossible 	 Solution
Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED lights amber and there is no screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly       connected the monitor and the computer. •  Inspect the signal cable and make sure      none of...

3-
6
Chapter 3: General Instruction  

3.4
 Supported operating modes

*
	
Modes
	
not
	
listed
	
in
	
the
	
above
	
tables
	may
	
not
	
be
	supported.
	
For
	
optimal
	resolution,
	
we
	
recommend
	
that
	you
	choose
	a
	mode
	listed
	in
	the
	above
	tables

 
Standard Resolution Frequency Horizontal Frequency (KHz)Pixel (MHz) 
640x480@60Hz 31.469 25.175 
640x480@72Hz 37.861 31.5 VGA 
640x480@75Hz 37.5 31.5 
800x600@56Hz 35.156 36 
800x600@60Hz 37.879 40 
800x600@72Hz 48.077 50 
SVGA 
800x600@75Hz...