Asus Transformer Pad TF700 TF0070 User Manual

							
ASUS Transformer Pad Manual81

Docking the ASUS Transformer Pad
To dock the ASUS Transformer Pad:
1.  Align the ASUS Transformer Pad with the mobile dock.
2.
  Firmly insert the ASUS Transformer Pad into the socket until it clicks, 
indicating that the ASUS  Transformer Pad is securely seated on the dock.
3.
 
Ensure that the latch completely moves to the right.
Always pick up the entire device assembly from the bottom when your ASUS Transformer Pad is attached to the mobile dock.
1
2
2
3 
						

							
ASUS Transformer Pad Manual82

Undocking the ASUS Transformer Pad
To undock the ASUS Transformer Pad:
1.  Use one hand to move the latch to the left to release the ASUS 
Transformer Pad and stabilize the mobile dock.
2.
 
Use the other hand to remove the ASUS Transformer Pad from the 
mobile dock.
3
2
2
1 
						

							
ASUS Transformer Pad Manual83

Charging the ASUS Transformer Pad on the mobile 
dock
•    Use only the power adapter that comes with your device. Using a different power adapter may damage your device.
•
   
Ensure that the 40-pin USB connector is fully inserted into your ASUS 
Transformer Pad or mobile dock.
•
   
The input voltage range between the wall outlet and this adapter is 
AC 100V–240V, and the output voltage of this adapter is DC 15V, 1.2A.
•   Fully charge the battery up to eight hours for first-time use.
•   The ASUS Transformer Pad cannot be charged via the USB Dock    
 
cable when it is connected to the mobile dock.
1
2
3 
						

							
ASUS Transformer Pad Manual84

Installing and removing an SD card
To install the SD card:
1.  Remove the SD slot cover from the SD card slot.
2. 
  Insert the SD card into the SD card slot.
3.
  Push the SD card until it locks in place.
To remove the SD card
1.  Tap the SD card icon at the 
bottom right corner and tap  to safely remove the microSD card.
2
 
Press the card slightly until it 
ejects.  
						

							
ASUS Transformer Pad Manual85

Declarations and Safety Statements
Federal Communications Commission Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•
  Increase the separation between the equipment and receiver.
•
  Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
•
 
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels.
The highest SAR value for the device as reported to the FCC is 0.45 W/kg when placed next to the body. 
						

							
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQTF201.
This device is compliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.
IC Regulations
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This Category II radiocommunication device complies with Industry Canada Standard RSS-310.
Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 d’Industrie Canada.
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in Iep 1528. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
The County Code Selection feature is disabled for products marketed in the US/Canada.
For product available in the USA/ Canada markets, only channel 1~11 can be operated. Selection of other channels is not possible.
ASUS Transformer Pad Manual86 
						

							
ASUS Transformer Pad Manual87

Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2.
DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
DO NOT throw the ASUS Transformer Pad in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in  municipal waste. Check local regulations for disposal of electronic products.
SAFE TEMP: This ASUS Transformer Pad should only be used in environments with ambient temperatures between 0°C (32°F) and 35°C (95°F).
Risk of Explosion if Battery is Replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
CE Mark Warning
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
  
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.
ASUS Recycling/Takeback Services
ASUS  recycling  and  takeback  programs  come  from  our  commitment  to  the highest  standards  for  protecting  our  environment.  We  believe  in  providing solutions  for  you  to  be  able  to  responsibly  recycle  our  products,  batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. 
						

							
ASUS Transformer Pad Manual88

Tuxera software provides support for NTFS format.
The weather information is provided by AccuWeather.com®.
The iFont font format adopted in this product is developed by Arphic.
Adobe® Flash® Player support+
+Flash Player 10.2 is now available for download on Android Market. This is a production GA (General Availability) release for Android 2.2 (Froyo) and 2.3 (Gingerbread) devices and an initial beta release for Android 3.x (Honeycomb) tablets that include at least Google’s 3.0.1 system update. 
For more details, please visit http://blogs.adobe.com/flashplayer/.
Download the latest Adobe Flash Player version 11.1.112.60 for ICS devices. 
						

							
ASUS Transformer Pad Manual89

Copyright Information
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or tranPadd into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS and ASUS Transformer Pad logo are trademarks of ASUSTek Computer Inc. Information in this document is subject to change without notice.Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
ManufacturerASUSTek COMPUTER INC.
Address, CityNo. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C
CountryTAIWAN
Authorized 
Representative in Europe
ASUS COMPUTER GmbH
Address, CityHARKORT STR. 21-23, 40880 RATINGEN
CountryGERMANY