Asus S96j Service Guide
Here you can view all the pages of manual Asus S96j Service Guide. The Asus manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 31
Assembly procedure
4. Install the both hinge on LCD back cover.
5. Install the inverter board on LCD back cover and then secure 2 screws to secure it.
Assembly LCD Module
1. Connect the coaxial cable and paste 2 pieces of tapes to secure it.
3 - 3
Page 32
Assembly procedure
2. Install the left LCD bracket and secure 4 screws to fix it.
3. Install the right LCD bracket and secure 4 screws to fix it.
4. Install the LCD panel and secure 10 screws to secure it.
3 - 4
Page 33
Assembly procedure
5. Connect the LCD cable. and inverter cable
6. Combine the LCD bezel and LCD Cover properly and press on all four edges until them snap
into position.
7. Secure 8 screws on LCD front bezel then paste 7 rubber pads above.
3 - 5
Page 34
Assembly procedure
Bottom Case Module BOTTOM
CASE
MODULE
The illustrations below show how to assembly the Bottom case module. The module
contains Bluetooth board, speaker cable.
Assembling Bottom case Module BOTTOM
CASE ASSEMBLY
1. Install the Bluetooth module on the bottom case.
Motherboard MOTHERBOARD
The illustrations below show how to assemble and install the...
Page 35
Assembly procedure
2. Connect the modem cable and paste 5 pieces of tape to fix the cable.
3. Secure 2 screws for CRT on the right side by a spacer screwdriver.
4. Secure 1 screw on the IO bracket to secure it.
3 - 7
Page 36
Assembly procedure
5. Combine the Motherboard and the bottom case.
6. Secure 1 screw here and then connect the Bluetooth cables in the motherboard.
TOP CASE
MODULE
Top Case Module
The illustrations below show how to assemble and install the top case module of the
notebook.
1. Install the speaker module on the Top case Module and then secure 4 screws TOP
CASE
ASSEMBLY...
Page 37
Assembly procedure
2. Install the touchpad on the top case.
3. Install the touchpad bracket and secure 4 screws to secure it.
4. Connect the touch pad FPC
5 Combine the bottom case with the top case.
3 - 9
Page 38
Assembly procedure
6. Connect the Touchpad FPC and Speaker cable from the top case.
1. Turn over the NB and secure18 screws on the bottom case. BOTTOM CASE
ASSEMBLY
3 - 10
Page 39
Assembly procedure
2. Combine the Top case module and LCD module.
3. Secure 4 screws which are in red circule, and then connect the Coaxial & inverter cable, then
secure 2 screws( in yellow circle )to fix the cable.
4. Turn over the notebook, and then secure 2 screws here.
Assembling Keyboard KEYBOARD
The illustrations below show how to assemble and install the Keyboard of the...
Page 40
Assembly procedure
2. Install the indicator cover on the top case .
3. Turn over the notebook and then secure 3 screws here.
Optical Drive Module OPTICAL DRIVE
MODULE
INSTALLATION
The illustrations below show how to assemble and install the optical drive Module of the
notebook.
3 - 12