Asus S62 Service Guide
Here you can view all the pages of manual Asus S62 Service Guide. The Asus manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 31
Disassembly procedure
6. Disconnect the LCD cable.
7. Remove 2 screws (M2.5*4L (K)) & 4 screws (M2.5*6L (K)) and take away the
LCD panel.
M2.5*4L
M2.5*6L
5. Remove 4 screws(M2*3L(K)) on the right LCD bracket to disassemble the LCD
bracket.
M2*3L
2 - 20
Page 32
Disassembly procedure
6. Remove 4 screws(M2*3L(K)) on the left LCD bracket to disassemble the other
LCD bracket.
M2*3L
7. Remove 2 pieces of tapes and disconnect the coaxial cable then take it away.
8. Remove 1 screw (M2x 4L).
.
M2*4L
2 - 21
Page 33
Disassembly procedure
9. Lift a little bit the inverter board and disconnect the inverter cable and then take
it away.
6. Remove 2 screws (M2x 6L) on both hinge and take them away.
M2.5*6L M2.5*6L
2 - 22
Page 34
Disassembly procedure
7. Disconnect the camera cable and remove the microphone.
8. Remove the cable and remove mylar then take away the cable.
9. Take away the Camera module from the LCD back cover.
10. Remove 1 screw (M2x 4L) and remove 3 pieces of tapes then take away the
wireless black wire.
2 - 23
Page 35
Disassembly procedure
11. Remove 1 screw (M2x 4L) and remove 3 pieces of tapes then take away the
wireless white wire.
2 - 24
Page 36
Assembly procedure
Chapter
3
Assembly Procedure
Please follow the information provided in this section to perform the complete
assembly procedure of the notebook. Be sure to use proper tools described
before.
fter you have completed the previous chapter of complete disa ssembly, please follow this
chapter to assemble the notebook...
Page 37
Assembly procedure
LCD Module LCD MODULE
The illustrations below show how to assemble and install the LCD module of the
notebook.
1. Install the wireless wh ite wire module and secure 1 screw (M2x 4L) then paste 3
pieces of tapes to secure it. LCD MODULE
ASSEMBLY
2....
Page 38
Assembly procedure
4. Install the microphone on the LCD cover and connect the camera cable.
5. Lay the inverter cable through the locking trench on the LCD back cover.
6. Lay the inverter cable through the locking trench on the LCD back cover.
3 - 3
Page 39
Assembly procedure
7. Install the both hinge on LCD back cover and secure 2 screws (M2x 6L) to
secure them.
8. Install the inverter board on LCD back cover and connect the inverter cable.
9. Secure 1 screw (M2x 4L) to secure it.
.
M2.5*6LM2.5*6L
M2*4L
3 - 4
Page 40
Assembly procedure
Assembly LCD Module
1. Connect the coaxial cable and paste 2 pieces of tapes to secure it.
2. Install the left LCD bracket and secure 4 screws (M2*3L (K)) to fix it.
3. Install the right LCD bracket and 4 screws(M2*3L(K)) and secure 4 screws
(M2*3L (K)) to fix it.
M2*3L
M2*3L
3 - 5