Asus S37e Service Guide
Here you can view all the pages of manual Asus S37e Service Guide. The Asus manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 11
Disassembly procedure
2 - 11
Removing Keyboard Cable
1. Use a flexible connector tool to unlock the cable connector on both ends (no. 1).
2. Carefully pull out the keyboard cable (no. 2) with a pair of tweezers.
3. Lock the connector (no. 3) again to avoid possible breakage.
Motherboard module
The illustrations below show how to disassemble...
Page 12
Disassembly procedure
2 - 12
3. Remove both hinge covers and remove 2 screws on each hinge.
4. Put the cables and antennas through the hinge holes.
Page 13
Disassembly procedure
2 - 13
5. Take the LCD module away.
6. Tear 1 piece of tape here, and then disconnect the fingerprint FPC and speaker cable from
mother board.
7. Remove 7 screws here on mother board and then remove the mother board.
Fingerprint FPC Touchpad cable
Page 14
Disassembly procedure
2 - 14
8. Remove the TPM board.
9. Remove 6 pieces of tape here and then disconnect the modem cable from mother board.
10. Remove 2 screws here and remove the modem module.
Page 15
Disassembly procedure
2 - 15
Top Case Module
The illustrations below show how to disassemble and remove the top case module of the notebook.
The module contains the top case itself.
Removing Top Case Module
1. Tear 1 piece of tape here and remove the Bluetooth module.
2. Remove 2 screws on each speaker.
3. Take the speaker lines out...
Page 16
Disassembly procedure
2 - 16
4. Remove this black Mylar here and disconnect the fingerprint FPC and touchpad FPC here.
5. Remove 4 screws on fingerprint bracket and take it away.
6. Remove 2 screws here to separate the fingerprint bracket from the fingerprint board.
Page 17
Disassembly procedure
2 - 17
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, Inverter board, LCD bezel, LCD back cover.
Disassembling LCD Module
1. Remove 6 rubber pads and 6 screws on LCD front bezel.
2. Pry the inside edges softly to separate LCD front bezel from LCD...
Page 18
Disassembly procedure
2 - 18
4. Disconnect the LCD cable and inverter cable from inverter board, and then take it away.
5. Remove 4 screws here.
Page 19
Disassembly procedure
2 - 19
6. Take the LCD panel away.
7. Remove 3screws on each LCD bracket and take both brackets away.
8. Remove the white transparent Mylar here and disconnect Coaxial cable from LCD panel, and
then remove the coaxial cable.
Page 20
Disassembly procedure
2 - 20
9. Remove 2 screws on each hinge and take both hinges away.
10. Remove 1 screw here and tear 6 pieces of tape.
11. Take out the camera module and microphone module, and then remove them together.