Asus Router WL-520GU/GC User Manual

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
1

R

6) Setting up Bandwidth Management (for WL-520GU Only)
Bandwidth Management provides a mechanism that controls the traffic of your network. To set up bandwidth management:
1.  Click 
Basic Config page in Bandwidth Management folder. In this page you can see four buttons including Gaming Blaster, Internet Application, and VOIP/Video Streaming. In this page, you can click each item to set its priority higher. After you click each item, the letters on the button turns yellow (see figures below) and the green  bar behind it automatically grows longer, indicating its bandwith status is the first priority. Click Finish and Apply to complete the configuration. The following figures shows different bandwith priority settings:
Gaming Blaster 
						

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
20

R

VOIP/Video Streaming
Internet Application 
						

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
21

R

2.  You can also configure the bandwidth manually by clicking "User Specify Services". 
Input the IP adress, destination port and choose the priority status from the drop-
down list. 
						

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
22

R

ASUS WL-520GU Wireless Router provides one USB2.0 port for printer sharing . 
5. Application Features
1) Sharing USB Printer (WL-520GU only)
You  can  connect  a  comptible  USB  printer  to  the  USB2.0  port  of  WL-520GU  to 
share  the  printer  with  your  LAN  users.  Follow  the  procedures  below  to  setup  your 
computers to utilize the printer server function of WL-520GU.
Installing USB Printer
Plug  your  USB  printer  to  the  USB2.0  port  on  WL-520GU  rear panel.  To  verify  whether  your  printer  is  properly  installed  and  to WL-520GU  Wireless  Router,  click Status  &  Log  ->  Status.  If Printer Model is correct and Printer Status is On-Line, you can share this printer within your LAN.
Note:  Visit  ASUS  Website  for comaptible  printer  vendor  and models.
Setting up Printer Client under Windows XP
Follow the steps below to install network printer on your clients.
1. Run  Add  Printer  Wizard  from Start  -> Printers and Faxes -> Add a printer. 2. 
Select Local  printer  attached  to  this computer and click Next. 
						

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
23

R

5. Input  the  IP  address  of  WL-520GU  in the Printer  Name  of  IP  Address  field and click Next. 6. 
Select 
Custom and click Settings...
7.  S e t  
P r o t o c o l  t o  L P R  a n d   t y p e LPRServer in Queue Name field. Click Next to continue. 8. 
Press 
Next  to  finish  standard  TCP/IP port setting.
3. Select Create a new port and set Type of  port  to Standard  TCP/IP  Port,  then click Next. 4. 
C l i c k 
N e x t  t o  s e t u p  T C P / I P  p o r t  f o r accessing the network printer. 
						

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
24

R

9. Press Finish  to  complete  the  settings and return to Add Printer Wizard. 10. 
Install  printer  driver  from  the  vendor-model  list.  If  your  printer  is  not  in  the list, click Have Disk to manually assign the location of driver. 
11.  Click 
Next  to  accpt  the  default  name for the printer. 12. 
Select Yes  to  print  a  test  page.  Click Next to print.
13. T h e  i n s t a l l a t i o n  i s  c o m p l e t e .  C l i c k Finish to quit the Add Printer Wizard. 
Note:  If  you  use  Windows®  98  or  ME  which  does  not  support  Standard TCP/IP  port, you need to use Romote Port which is supported by WL-520GU.
Note: If you have already installed the printer locally on your computer, right click the printer icon and select Property -> Port tab to add a standard TCP/IP port. Click Add Port then select Standard TCP/IP Port and click New Port button. Refer to step 5-8 for setting procedures. 
						

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
25

R

1) Utility Installation for WL-520GU/GC
1. Click Install  ASUS  Wireless  Router Utilities  to  run  the  setup  installation program. 2. 
Click 
Next to continue.
3.  C l i c k 
N e x t  t o  i n s t a l l  t h e  u t i l i t y  i n  t h e designated location. 4.
 Select a program folder and click Next.
5.  Press Finish to quit the installation program.
6. Setting up Using ASUS utility 
						

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
26

R

Wireless  settings,  including  network  name  and  network  keys,  are  generated  automatically. You can modify these settings manually. 
Note:  if  your  wireless  router  is  configured  before,  select Preserve  original  wireless  router settings to use the current value. Click Next to continue.
Click the EZSetup button in the utility.
2) EZSetup
Wireless LAN setup will complete in two easy steps. Firstly open the EZSetup utility 
form Start menu, then push the EZSetup button on the rear panel for 3 se\
conds.
1)  If the Setup button is pushed without running the EZsetup wizard ut\
ility, the PWR indicator will flash and Internet connections will pause for a short period but will then return to normal operation without change.      2) To use EZSetup, we recommend using an ASUS wireless adapter such as WL-106gM, WL-100gE, and WL-169gE.
Note:  Use  EZSetup  Wizard  with  one wireless client at a time. If the wireless client  computer  cannot  discover  the w i r e l e s s  r o u t e r  w h i l e  i n  E Z S e t u p mode,  please  shorten  the  distance between the client and the router.
1Push EZSetup over 3 sec. and release.
2
3 
						

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
27

R

If  you  need  to  configure  the  ISP  settings  for  your  wireless  router,  select Configure  ISP settings, click Next and follow the instructions to complete the settings.
Setup is complete, press Print/Save Wireless LAN  Settings  button  for  future  reference. Click Finish to exit the EZSetup utility.
4
5
7. Troubleshooting
Cannot access to web browser for router configuration
1 .   O p e n   a   w e b   b r o w s e r   a n d   o p e n "Internet Options" dialog box.
2.  Click  on  "Delete  Cookies"  and  "Delete Files". 
						

							
WL-520GU/GC Broad Range Wireless Family Router User Manual
28

R

Cannot Establish Connection via Wireless
 Out of Range:
 •  Put the router closer to the wireless client.
  •  Try to change the channel setting.
  Authentication:
 •  Use wired connection to connect to router. 
  •  Check the wireless security setting.
•   Do the hard reset on the wireless router by pressing the Restore button on the rear panel
 for more than 5 seconds.
  Couldn't find the router:
• Do the hard reset on the wireless router by pressing the Restore button on the re\
ar panal for more than 5 seconds.
  • Check the setting in the wireless adapter such as SSID and encrypti\
on setting.
Cannot get access to the Internet via wireless LAN adapter
 • Move the router closer to the wireless client.
• Check whether the wireless adapter is connected to the correct AP.
 • Check whether the wireless channel in use conforms to the channels \
available in your 
country/ area.
  • Check encryption setting.
  • Check whether the ADSL or Cable connection is correct.
  • Retry using another Ethernet cable.
3. Click Clear History.
4. Click Yes and then click the Connections tab.
5. Select the dial-up connection, and then click the Settings button.
6.  Clear  the Automatically  detect  settings  and  use  proxcy  server check  boxes  are  not selected.
7. Click Ok to close the Internet Options dialog box.