Asus Router WL-500gp V2 User Manual

							
WL-500gP V2 Wireless Router User Manual
28

7. S e t  P r o t o c o l  t o  L P R  a n d   t y p e LPRServer in Queue Name field. Click Next to continue. 8. 
Press 
Next  to  finish  standard  TCP/IP port setting.
9. Press Finish  to  complete  the  settings and return to Add Printer Wizard. 10. 
Install  printer  driver  from  the  vendor-model  list.  If  your  printer  is  not  in  the list, click Have Disk to manually assign the location of driver. 
5. 
Input the IP address of WL-500gP V2 
in the Printer Name of IP Address 
field and click Next. 6. 
Select 
Custom and click Settings... 
						

							
WL-500gP V2 Wireless Router User Manual
29

11. Click Next  to  accept  the  default  name for the printer. 12. 
Select Yes  to  print  a  test  page.  Click Next to print.
13. T h e  i n s t a l l a t i o n  i s  c o m p l e t e .  C l i c k Finish to quit the Add Printer Wizard. 
Note:  If  you  use  Windows®  98  or  ME  which  does  not  support  Standard TCP/IP  port, you need to use Romote Port which is supported by WL-500gP V2.
Note: If you have already installed the printer locally on your computer, right click the printer icon and select Property -> Port tab to add a standard TCP/IP port. Click Add Port then select Standard TCP/IP Port and click New Port button. Refer to step 5-8 for setting procedures. 
						

							
WL-500gP V2 Wireless Router User Manual
30

1) Utility Installation for WL-500gP V2
1. Click Install  ASUS  Wireless  Router Utilities  to  run  the  setup  installation program. 2. 
Click 
Next to continue.
3.  C l i c k 
N e x t  t o  i n s t a l l  t h e  u t i l i t y  i n  t h e designated location. 4.
 Select a program folder and click Next.
5.  Press Finish to quit the installation program.
6. Open the 
EZSetup Wizard.
6. Setting up using ASUS utility 
						

							
WL-500gP V2 Wireless Router User Manual
3

Wireless  settings,  including  network  name  and  network  keys,  are  generated  automatically. You  can  modify  these  settings  manually.  Note  if  your  wireless  router  is  configured  before, select Preserve  original  wireless  router  settings  to  use  the  current  value.  Click Next  to continue.
Click the EZSetup button in the utility.
2) EZSetup
Wireless LAN setup will complete in two easy steps. First open the EZSetup utility 
form Start menu, then push the EZSetup button on the rear panel for 3 se\
conds.
1)  If the setup button is pushed without running the EZsetup wizard ut\
ility, the PWR indicator will flash and Internet connections will pause for a short period but will then return to normal operation without change.      2) To use EZSetup, we recommend using an ASUS wireless adapter such as WL-106gM, WL-100gE, and WL-169gE.
Note:  Use  EZSetup  Wizard  with  one wireless client at a time. If the wireless client  computer  cannot  discover  the w i r e l e s s  r o u t e r  w h i l e  i n  E Z S e t u p mode,  please  shorten  the  distance between the client and the router.
Push EZSetup over 3 sec. and release.
2
3 
						

							
WL-500gP V2 Wireless Router User Manual
32

If  you  need  to  configure  the  ISP  settings  for  your  wireless  router,  select Configure  ISP settings, click Next and follow the instructions to complete the settings.
Setup is complete, press Print/Save Wireless LAN  Settings  button  for  future  reference. Click Finish to exit the EZSetup utility.
4
5 
						

							
WL-500gP V2 Wireless Router User Manual
33

7. Configure WL500gP V2 under Vista OS
The  Windows  Simple  Config  function,  which  is  preinstalled  in  the ASUS  WL500gP 
V2, enables the device to be configured via WCN Net process of Windows Vista.
Follow the steps below to configure the device using WCN-Net process of Windows 
Vista:
Note: The WCN Net process of Windows Vista can only discover the device when the device is not configured and is in the default settings state. If the device is configured, you have to set up the device by WEB or EZsetup. Or you can push Reset button and then begin WCN-NET setup.
1. Connect the device to your PC and power on it. 
2.  Click 
Start >Network from the Vista desktop. The Network screen appears (as shown 
below). 
3. Double click ASUS Wireless Router. 
1) Configuring the device 
						

							
WL-500gP V2 Wireless Router User Manual
34

 A screen prompts you to enter the PIN of your device. The PIN is located on the sticker 
posted on the device. 
4. Enter the PIN   in the PIN box, then click Next.
5. Give the network a name and type it in the Network name box, then click Next. 
						

							
WL-500gP V2 Wireless Router User Manual
35

A Passphrase is generated for WPA security for the network.
6. Click Next from this screen.
 If you want to create a different passphrase, click create a different passphrase for 
me. If you want to use security method other than WPA-Personal, click Show advanced 
network security options.
  The “Create a different passphrase” and “Security methods” screens are shown below.  
						

							
WL-500gP V2 Wireless Router User Manual
36

 Create  a different passphrase
 Four security methods 
						

							
WL-500gP V2 Wireless Router User Manual
37

6.  Click Next from the above screens after the configuration is completed. The complete 
configuration screen appears as shown below. Click Close to finish the process and exit.
2) Setting up the network sharing center
 Follow the steps below to set up a sharing center to allow the network u\
sers to share 
printer, file and media.
1.  Connect the device to your PC and power it on. 
2.  Click 
Network and Sharing Center in the navigation bar. The Network and Sharing 
Center screen appears.