Asus Router RT-N15 User Manual

							
RT-N15 Wireless Router User Manual
1

2.  You can also configure the bandwith manually by clicking "User Specify Services". Input the IP adress, destination port and choose the priority status from the drop-down list.
VOIP/Video Streaming 
						

							
RT-N15 Wireless Router User Manual
20

1) Utility Installation for RT-N15
1. Click Install ASUS Wireless Router Utilities to run the setup installation program. 2. 
Click 
Next to continue.
3.  Click 
Next to install the utility in the designated location. 4.
 Select a program folder and click Next.
5.  Press Finish to quit the installation program.
6. Open the 
WPS Wizard.
5. Setting up using ASUS utility 
						

							
RT-N15 Wireless Router User Manual
21

Wireless  settings,  including  Network  name  and  passphrase,  are  generated  automatically. You  can  modify  these  settings  manually.  If  your  wireless  router  is  already  configured,  select Preserve original wireless router settings to use the current value. Click Next to continue.
Follow the instructions to set up your hardware. When done, click Next.
2) WPS utility
1) To use WPS, your should use a wireless router and a wireless LAN card with WPS          function.  2) Operating systems and wireless adapters that support WPS:          
Note: Use WPS Wizard with one wireless client at a time. If the wireless client computer cannot discover the wireless router while in WPS mode, shorten the distance between the client and the router.
1
3
2Push the WPS button on the wireless router until its power LED is blinking. When done, click Next to continue.
OS SupportWireless Adapter Support Vista 32/64Intel wireless LAN cardASUS 167gv2 driver v3.0.6.0 or laterASUS 160N/130N driver v2.0.0.0 or later XP SP2Intel wireless LAN cardASUS 167gv2 driver v1.2.2.0 or laterASUS 160N/130N driver v1.0.4.0 or later XP SP1 and 2000ASUS LAN card with ASUS WLAN UtilityASUS 167gv2 driver v1.2.2.0 or laterASUS 160N/130N driver v1.0.4.0 or later
Notes:  1) When running WPS, the Internet        connection pauses briefly, then      reestablishes the connection.  2) If the WPS button is pushed      without running the WPS Wizard,      the PWR indicator flashes, and      the Internet connection pauses      briefly and then reestablishes the      connection. 
						

							
RT-N15 Wireless Router User Manual
22

5
You have connected to the wireless router. If you need to configure the Internet settings, click Setup to open the web browser. Click Finish to exit the WPS Wizard.
If you need to use a USB drive to add other devices to the network, click Save settings to a USB flash drive.
1) Plug a USB flash drive into a USB port  
  on your computer, and then select the 
  drive from the dropdown list. When  
  done, click Next to continue. 2) 
Remove the USB flash drive from this
 
  computer, and then plug to the  
  computer that you want to add to the  
  wireless network.
3)  Locate the 
SetupWireless.exe from the 
  USB drive, and double-click to run it.  
  Click Yes to add this computer to the  
  wireless network.
4) Click OK to exit the Wireless Network Setup  
  Wizard.
Setup is complete, press Save or print Settings, or Save settings to a USB drive button for future reference. Click Next to connect to the Internet.
4 
						

							
RT-N15 Wireless Router User Manual
23

3) Firmware Restoration
This utility will automatically search out fialed ASUS Wireless Routers and upload 
a firmware that you specify. The process takes about 3 to 4 minutes and during this 
process the PWR, AIR, and WAN LEDs will remain lit while the LAN LED will flash 
slowly.
The Fireware Restoration utility is an emergency rescue tool to restore \
a ASUS 
Wireless Router which has failed during a previous firmware upload. A failed 
firmware upgrade will cause the ASUS Wireless Router to enter a failure mode, 
waiting for the user to use the Firware Restoration utility to find and uplo ad a new 
firmware. This is not a firmware upgrade utility and cannot be used on a working 
ASUS Wireless Router. Normal firmware upgrades must be done through the web 
manager.
Using a Hub
If you have problems upload a firmware while using a network hub, try co nnecting 
your computer directly to the LAN port. Either 10Base-T or 100Base-TX 
connections will work. 
						

							
RT-N15 Wireless Router User Manual
24

6. Configure RT-N15 under Vista OS
The Windows Simple Config function, which is preinstalled in the ASUS RT-N15, 
enables the device to be configured via WCN Net process of Windows V ista.
Note: The WCN Net process of Windows Vista can only discover the device when it is not configured and is in the default settings state. If the device is  configured, you have to set up the device by WEB or EZsetup. You can also push the Reset button and then begin WCN-NET setup.
1) Configuring the device
Follow the steps below to configure the device using WCN-Net process of Windows 
Vista:
1. Connect the device to your PC and power on it.
2.  Click 
Start > Network from the Vista desktop. The Network screen appears.
3.  Double-click 
ASUS Wireless Router. 
						

							
RT-N15 Wireless Router User Manual
25

4. A screen prompts you to enter the PIN, which is located on the sticker po\
sted on the device. Enter the PIN in the PIN box, then click Next.
5. Give the network a name and type it in the Network name box, then click Next. 
						

							
RT-N15 Wireless Router User Manual
26

6. A Passphrase is generated for WPA security for the network. Click Next from this screen.
If you want to create a different passphrase, click create a different passphrase 
for me. If you want to use security method other than WPA-Personal, click Show 
advanced network security options.
The screens for Create a different passphrase and Security methods are shown 
in the next page. 
						

							
RT-N15 Wireless Router User Manual
27

Create a different passphrase
Four security methods 
						

							
RT-N15 Wireless Router User Manual
28

7. Click Next from the above screens after the configuration is completed. The complete configuration screen appears as shown below. Click Close to finish the process and exit.