Asus Router RT-N15 User Manual

RT-N15 Wireless Router User Manual


3) Set the authentication and encryption of your WLAN card the same with those at RT-N15. In the previous steps the Key Length is 64 bits, Passphrase is 11111 Click Next to continue.
1) Select Connect to an existing wireless LAN (Station) radio button and click Next to continue.2) 
One Touch Wizard searches and displays the available APs in the Available Networks list. Select RT-N15 and press Next to continue.
4)  It takes several seconds for the wireless 
card...

RT-N15 Wireless Router User Manual
10

7. Configuring advanced features
To  view  and  adjust  other  settings  of  the  wireless  router, enter  the  Web  configuration  page  of  RT-N15.  Click  on items  on  the  menu  to  open  a  submenu  and  follow  the instructions  to  setup  the  router.  Tips  show  up  when  you move your cursor over each item.
 Configuring WLAN card with Windows® WZC service
If  you  use  non-ASUS  wireless  card,  you  can  set  up  the  wireless  connection  with...

RT-N15 Wireless Router User Manual
11

4. Wireless router features
This chapter provides setup examples of some frequently used router features. 
You can set up these features via your Web browser.
1) Choosing an appropriate operation mode
ASUS RT-N15 Wireless Router supports three operation 
modes: home gateway, router, and access point. Click 
System Setup -> Operation mode to open the configuration 
page.
Home gateway mode is for home or SOHO users who want to connect to 
their ISPs for Internet...

RT-N15 Wireless Router User Manual
12

2) Setting up wireless encryption 
RT-N15 provides a set of encryption and authentication 
methods to meet the different demands of home, SOHO, 
and enterprise users. Before setting up encryption 
and authentication for RT-N15, contact your network 
administrator for advice.
Click Wireless -> Interface to open the configuration page.
Encryption
The encryption modes supported by RT-N15 are: WEP (64bits), WEP (128bits), 
TKIP, AES, and TKIP+AES.
WEP stands for Wired...

RT-N15 Wireless Router User Manual
13

2. Select Yes to enable virtual server. For example, if host 192.168.1.100 is the FTP server that the user will access, it means all packets from Internet with destination port as 21 are to be directed to the host. Set Well-known Application to FTP. Port range to 21, Local IP to the host IP, Local Port to 21, Protocol to TCP.
3.  Click 
Finish.
4.  Click 
Save & Restart to restart the wireless router and activate the settings.
Authentication
The authentication...

RT-N15 Wireless Router User Manual
14

1. Click Virtual DMZ in the NAT Setting menu.
2.  Enter the IP address of the 
host and click Finish.
3.  Click 
Save & Restart to restart the wireless router and activate the settings.
5) Setting up DDNS
DNS enables host who uses static IP address to associate with a domain name; 
for dynamic IP users, they can also associate with a domain name via dynamic 
DNS (DDNS). DDNS requires registering and account-creating at DDNS service 
providers' website. The DDNS...

RT-N15 Wireless Router User Manual
15

3. After clicking Free Trial, you are directed to the homepage of www.DynDNS.org, where you can register and apply for DDNS service.
  Read the policy and select 
"I have read...".
4.  Enter your user name, 
e-mail address, password, then click Create Account.
5.  A message prompts 
out informing that your account has been created. An E-mail is sent to your mailbox. Open your mailbox and read the mail.
6.  You can find the activation 
letter in your E-mail...

RT-N15 Wireless Router User Manual
16

9.   After logging in, you can see this welcome message.
10.  Select 
Services tab.
11.  Click 
Add Dynamic DNS Host .
12.  Enter the host name then 
click Add Host.
13.  You can see this message 
when your hostname is successfully created. 

RT-N15 Wireless Router User Manual
17

14. Fill the account information into the DDNS setting fields of your wireless router. 
15.  Click 
Finish.
16.  Click 
Save & Restart to restart the wireless router and activate the settings.
17.  Verify whether DDNS is working. Click 
Start menu and select Run. Type  cmd and click OK to open the CLI console.
18.  Type 
ping account.dyndns.org (your DDNS domain name). If you can see the reply like what is shown in the right picture, DDNS is working correctly. 

RT-N15 Wireless Router User Manual
18

6) Setting up Bandwidth Management
Bandwidth Management provides a mechanism that controls the traffic of you 
network. To set up bandwidth management:
1. Click Basic Config page in Bandwidth Management folder. In this page you can see four buttons including Gaming Blaster, Internet Application, 500W FTP Server, and VOIP/Video Streaming . In this page, you can click each item to set its priority higher. After you click each item, the letters on the button turns...