Asus Pw201 User Guide

							2-5 2-52-5 2-5
2-5
ASUS LCD Monitor PW201 ASUS LCD Monitor PW201ASUS LCD Monitor PW201 ASUS LCD Monitor PW201
ASUS LCD Monitor PW201
2.4 Adjusting the monitor
You can adjust the monitor to several directions as shown below.
• For optimal viewing, we recommend that you look at the monitor,
then adjust the monitor to the angle that is most comfortable for
you.
• Hold the stand to prevent the monitor from falling when you change
its angle.
• You can also turn the monitor 90º counterclockwise.
           90º
• You can adjust the monitor’s angle from  -5º to 25º.
    -5º~25º
 
						

							2-6 2-62-6 2-6
2-6
Chapter 2: Setup Chapter 2: SetupChapter 2: Setup Chapter 2: Setup
Chapter 2: Setup
• The stand allows you to turn the monitor left/right up to 120º.
      120º
2.5 Detaching the stand
(for VESA wall mount)
The detachable stand of the PW201 monitor is specially designed for VESA
wall mount.
To detach the stand:
1. Turn the VESA cover counterclockwise to open it.
2. Remove the VESA cover from the stand.
Position the front of the monitor face down to make the detachment
safer and easier. We recommend that you cover the surface with soft
cloth to prevent damage to the monitor.
 VESA Cover
 
						

							2-7 2-72-7 2-7
2-7
ASUS LCD Monitor PW201 ASUS LCD Monitor PW201ASUS LCD Monitor PW201 ASUS LCD Monitor PW201
ASUS LCD Monitor PW201
3. Use a screwdriver to remove the four screws on the monitor stand.
The VESA wall mount (100 mm x 100 mm) is purchased separately.
 
						

							2-8 2-82-8 2-8
2-8
Chapter 2: Setup Chapter 2: SetupChapter 2: Setup Chapter 2: Setup
Chapter 2: Setup
 
						

							Chapter 3
General Instruction
This chapter introduces the operating
instruction, including how to use the
OSD (On-Screen Display) menu and activate
the Pivot
®Pro and LifeFrame utilities.
 
						

							3-2 3-23-2 3-2
3-2
Chapter 3: General Instruction Chapter 3: General InstructionChapter 3: General Instruction Chapter 3: General Instruction
Chapter 3: General Instruction
3.1 OSD (On-Screen Display) menu
3.1.1 3.1.13.1.1 3.1.1
3.1.1
Configuring the OSD Configuring the OSDConfiguring the OSD Configuring the OSD
Configuring the OSD
1. Touch the  sensor to activate
the OSD menu.
2. Touch 
 and to navigate through the functions. Highlight and
activate the desired function by touching the 
 sensor. If the
function selected has a sub-menu, touch 
 and  again to
navigate through the sub-menu functions. Highlight and activate the
desired sub-menu function by touching the 
 sensor.
3. Touch 
 and  to change the settings of the selected function.
4. To exit the OSD menu, touch the 
 sensor. Repeat step 2 and 3 to
adjust any other function.
3.1.2 3.1.23.1.2 3.1.2
3.1.2
OSD Function Introduction OSD Function IntroductionOSD Function Introduction OSD Function Introduction
OSD Function Introduction
1.
Spendid SpendidSpendid Spendid
Spendid
This function contains five
sub-functions you can select
for your preference.
•
Scenery Mode. Scenery Mode.Scenery Mode. Scenery Mode.
Scenery Mode. Advance for scenery use with SPLENDID™ Video
Enhancement.
•
Standard Mode. Standard Mode.Standard Mode. Standard Mode.
Standard Mode. Advance for general Window use with
SPLENDID™ Video Enhancement.
•
Theater Mode. Theater Mode.Theater Mode. Theater Mode.
Theater Mode. Advance for movie use with SPLENDID™ Video
Enhancement.
•
Game Mode.  Game Mode. Game Mode.  Game Mode. 
G a m e   M o d e .  Advance for game use with SPLENDID™ Video
Enhancement.
•
Night View Mode Night View ModeNight View Mode Night View Mode
Night View Mode. Advance for dark-display use with SPLENDID™
Video Enhancement.
 
						

							3-3 3-33-3 3-3
3-3
ASUS LCD Monitor PW201 ASUS LCD Monitor PW201ASUS LCD Monitor PW201 ASUS LCD Monitor PW201
ASUS LCD Monitor PW201
2.
Image ImageImage Image
Image
You can adjust brightness, contrast,
sharpness, saturation, position (VGA
only), and focus (VGA only) from
this function.
•
Brightness.  Brightness. Brightness.  Brightness. 
Brightness. The adjusting range is from 0 to 100.        is a
hotkey to activate this function.
•
Contrast.  Contrast. Contrast.  Contrast. 
Contrast. The adjusting range is from 0 to 100.
•
Sharpness.  Sharpness. Sharpness.  Sharpness. 
Sharpness. The adjusting range is from 0 to 100.
•
Saturation.  Saturation. Saturation.  Saturation. 
Saturation. The adjusting range is from 0 to 100.
•
Position. Position.Position. Position.
Position. Adjusts the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100.
•
Focus.  Focus. Focus.  Focus. 
Focus. Reduces Horizonal-line noise and Vertical-line noise of the
image by adjusting (Phase) and (Clock) separately. The adjusting
range is from 0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong
phase adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by
one horizontal sweep. If the frequency is not correct, the screen
shows vertical stripes and the image is not proportional.
3.
Color ColorColor Color
Color
Select the image color you like
from this function.
•
Color Temp. Color Temp.Color Temp. Color Temp.
Color Temp. Contains five color modes including Cool, Normal,
Warm, sRGB, and User mode.
•
Skin Tone. Skin Tone.Skin Tone. Skin Tone.
Skin Tone. Contains three color modes including Reddish, Natural,
and Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Bluee) are user-
configurable; the adjusting range is from 0-100.
 
						

							3-4 3-43-4 3-4
3-4
Chapter 3: General Instruction Chapter 3: General InstructionChapter 3: General Instruction Chapter 3: General Instruction
Chapter 3: General Instruction
4. I
nput Select nput Selectnput Select nput Select
nput Select
• There are several input sources
you can choose from.
• You can also use this function by
touching the     sensor on the
front bezel.
5. 5.5. 5.
5.
PIP Setup PIP SetupPIP Setup PIP Setup
PIP Setup
• This Picture-in-Picture (PIP)
      function allows the LCD monitor
      to display two pictures at the same
      time. The table below shows the
      combination of Main PC modes and
      PIP inputs.
• Select the PIP input and adjust
the size as needed.
    Main and PIP input combination matrix Main and PIP input combination matrixMain and PIP input combination matrix Main and PIP input combination matrix
Main and PIP input combination matrix
  VGA    VGA   VGA    VGA 
  VGA                       
     DVI DVIDVI DVI
DVI                          
      Video      S-Video   Video      S-Video  Video      S-Video   Video      S-Video  
Video      S-Video                
   Component ComponentComponent Component
Component
VGA  o o   o x
DVI o o   o o
Video o o   x o
S-Video o o x o
Component x o o o
      o: Supported
      x: Not supported
Main MainMain Main
MainPIP PIPPIP PIP
PIP
 
						

							3-5 3-53-5 3-5
3-5
ASUS LCD Monitor PW201 ASUS LCD Monitor PW201ASUS LCD Monitor PW201 ASUS LCD Monitor PW201
ASUS LCD Monitor PW201
6.
System Setup System SetupSystem Setup System Setup
System Setup
Allows you to adjust the system
settings.
•
Volume. Volume.Volume. Volume.
Volume. The adjusting range is from 0 to 100. 
 is a hotkey to
activate this function.
•
Aspect Controls. Aspect Controls.Aspect Controls. Aspect Controls.
Aspect Controls. In video mode, there are four kinds of settings
which fit different situations: Normal, Panorama, Zoom, and Full.
•
OSD Setup.  OSD Setup. OSD Setup.  OSD Setup. 
OSD Setup. Adjusts the horizontal postition (H-Position) and
the vertical position (V-Position) of the OSD. The adjusting range is
from 0 to 100. In the OSD Timeout selection, you can adjust the
OSD timeout from 10 to 120.
•
Language. Language.Language. Language.
Language. There are eleven languages for your selection,
including English, German, Italian, French, Dutch, Spanish, Russian,
Traditional Chinese, Simplified Chinese, Japanese, and Korean.
•
Information. Information.Information. Information.
Information. Shows the monitor information.
•
Reset. Reset.Reset. Reset.
Reset. “Yes” allows you to revert to the factory defaults. “No”
allows you to keep the current state.
 
						

							3-6 3-63-6 3-6
3-6
Chapter 3: General Instruction Chapter 3: General InstructionChapter 3: General Instruction Chapter 3: General Instruction
Chapter 3: General Instruction
3.2 Pivot®Pro software
Pivot®Pro is a software that is designed for rotatable monitors. With this
software, you can rotate the image by 90º, 180º, and 270º to meet the
orientation of the monitor.
• Before starting to use this software, install Pivot®Pro into your PC.
• The Pivot®Pro software is bundled in the support CD.
To install the Pivot To install the PivotTo install the Pivot To install the Pivot
To install the Pivot® ®® ®
®Pro software: Pro software:Pro software: Pro software:
Pro software:
1. Close all other applications first.
2. Make sure your graphics card manufacturer’s (native)
drivers are installed before you install the Pivot
®Pro
software.
3. Insert the support CD into the optical drive and run the
START_PIVOT program.
After the installation, you can set up hotkeys for different rotation degrees
by pressing the right mouse button -->enter Properties --> Settings -->
Advanced -->Pivot Software -->Hotkeys.
The default hotkeys for each degree are as follows:
Rotate - Ctrl + Shift + R
0º - Ctrl + Shift + 0
90º - Ctrl + Shift + 9
180º - Ctrl + Shift + 8
270º - Ctrl + Shift + 7
• For more information or help, go to www.portrait.com.
• This software only supports Windows
® 98SE, ME, NT 4.0, 2000, and
XP operating systems.