Home > Asus > Monitor > Asus Pa246q User Guide

Asus Pa246q User Guide

Here you can view all the pages of manual Asus Pa246q User Guide. The Asus manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 21

3-5ASUS	PA246	Series	LCD	Monitor	
•	Position:	adjusts	the	horizontal	position	(H-Position)	and	the	vertical	
position	(V-Position)	of	the	image.	The	adjusting	range	is	from	0	to	100.
•	Focus:	reduces	Horizonal-line	noise	and	Vertical-line	noise	of	the	image	
by	adjusting	(Phase)	and	(Clock)	separately.	The	adjusting	range	is	from	
0	to	100.
•	AUTO Adjust.:	Automatically	adjusts	the	image	 to	its	 optimized	 position,	
clock,	and	phase.
•	Phase	adjusts	the	phase	of	the	pixel	clock	signal.	With	a	wrong...

Page 22

3-6Chapter	3:	OSD	(On-Screen	Display)	menu	
5. Input Select 
In	this	function,	you	can	select	your	desired	input	source.
6.	 System	Setup	
Allows	you	to	adjust	the	system.
•	Splendid Demo Mode:	splits	the	screen	into	two	for	Splendid	modes	
comparison.	(Scenery	mode/theater	mode	only)
•	OSD Setup:	
* Adjusts	the	horizontal	position	(H-Position)/the	vertical	position	
(V-Position)	of	the	OSD	from	0	to	100.	
* Adjusts	the	OSD	timeout	from	10	to	120	seconds.	
* Enables	or	disables	the	DDC/CI	function.
*...

Page 23

3-7ASUS	PA246	Series	LCD	Monitor	
3.2	 Specifications	summary	(PA246)
Panel TypeTFT	LCD
Panel size24.1"	(16:10,	61.13	cm)	wide	screen
Max. Resolution1920	x	1200
Pixel pitch0.270	mm
Brightness (Max.)400	cd/m2
Contrast Ratio (Typ.)1000:1
Contrast Ratio (Max.)50,000:1	(with	ASCR	on)
Viewing angle(H/V) CR>10178˚/178˚
Display colors1.07	Billion
Response time6	ms	(Gray	to	gray)
SPLENDID™ Video EnhancementYes
SPLENDID™ selection6	video	preset	modes	(by	hotkey)
Auto adjustmentYes
Color temperature selection3...

Page 24

3-8Chapter	3:	OSD	(On-Screen	Display)	menu	
3.3 Troubleshooting (FAQ)
ProblemPossible Solution
Power		LED	is	not	ON•	Press the  button to check if the monitor is	in	the	ON	mode.•	Check	if	the	power	cord	is	properly	connected to the monitor and the power outlet. •	Check	if	the	power	switch	is	ON.
The	power	LED	lights	amber	and	there	is	no	screen	image	•	Check if the monitor and the computer are in	the	ON	mode.•	Make	sure	the	signal	cable	is	properly	connected the monitor and the computer.•	Inspect	the...

Page 25

3-9ASUS	PA246	Series	LCD	Monitor	
3.4 Supported operating modes
Resolution FrequencyHorizontal Frequency (KHz)Vertical Frequency  (Hz)Pixel  (MHz)...
Start reading Asus Pa246q User Guide

Related Manuals for Asus Pa246q User Guide

All Asus manuals