Asus Ms226h User Guide

							
  
LCD Monitor
User Guide
      October  2009 
E5195   V1
MS226H/MS227N Series
 
						

							
ii

Copyright © 2009 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any langua\
ge in any form or by any means, except documentation kept by the purchaser for backup purposes, without \
the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be \
registered trademarks or copyrights of their respective companies, and are used only for identification or explanation a nd to the owners’ benefit, without intent to infringe. 
Table of contents
Notices.........................................................................\
.................................iii
Safety.information.........................................................................\
..............iv
Care.&.Cleaning..........................................................................\
..................v
Chapter.1:.Product.introduction.
1.1.Welcome!...........................................................................\
............1-1
1.2.Package.contents.........................................................................\
.1-1
1.3.Assembling.the.monitor.base......................................................1-2
1.5.Monitor.introduction.....................................................................1-4
1.5.1 Front of the LCD monitor ................................................1-4
1.5.2 Rear of the LCD monitor  ................................................1-5
Chapter.2:.Setup
2.1.Adjusting.the.monitor...................................................................2-1
Chapter.3:.General.Instruction..
3.1.OSD.(On-Screen.Display).menu..................................................3-1
3.1.1 How to reconfigure ..........................................................3-1
3.1.2 OSD Function Introduction ..............................................3-1
3.2.Specifications summary...............................................................3-4
3.3.Troubleshooting.(FAQ).................................................................3-5
3.4.Supported.operating.modes........................................................3-6
HDMI Supported Primary Timings3.5........................................... 3-7
 
						

							
iii
 

Notices
Federal. Communications . Commission . Statement
This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the 
following two conditions:
•  This device may not cause harmful interference, and
•  This  device  must  accept  any  interference  received  including  interference  that 
may cause undesired operation.
T h i s  e q u i p m e n t  h a s  b e e n  t e s t e d  a n d  f o u n d  t o  c o m p l y  w i t h  t h e  l i m i t s  f o r  a 
Class  B  digital  device,  pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are 
designed  to  provide  reasonable  protection  against  harmful  interference  in  a 
residential  installation.  This  equipment  generates,  uses  and  can  radiate  radio 
frequency  energy  and,  if  not  installed  and  used  in  accordance  with  manufacturer’
s  instructions,  may  cause  harmful  interference  to  radio  communications.  However, 
there  is  no  guarantee  that  interference  will  not  occur  in  a  particular  installation.  If 
this  equipment  does  cause  harmful  interference  to  radio  or  television  reception, 
w h i c h  c a n  b e  d e t e r m i n e d  b y  t u r n i n g  t h e  e q u i p m e n t  o ff  a n d  o n ,  t h e  u s e r  i s 
encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  following 
measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment to an outlet on a circuit different from that to which the 
receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Canadian
.Department
.of
.Communications
.Statement

This digital apparatus does not exceed the Class B limits for radio nois\
e emissions 

from digital apparatus set out in the Radio Interference Regulations of \
the 

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

As  an  Energy  Star
® 
Partner,  our  company  has  determined  that  this  product  meets 

the Energy Star
® 
guidelines for energy efficiency.
 
						

							
iv

Safety information
•  Before  setting  up  the  monitor,  carefully  read  all  the  documentation  that  came 
with the package.   
•  To prevent fire or shock hazard, never expose the monitor to rain or moisture.  
•  Never try to open the monitor cabinet. The dangerous high voltages inside the 
monitor may result in serious physical injury. 
•  If the power supply is broken, do not try to fix it by yourself. Contact a qualified 
service technician or your retailer.  
•  Before using the product, make sure all cables are correctly connected and the 
power cables are not damaged. If you detect any damage, contact your dealer 
immediately. 
•  S l o t s  a n d  o p e n i n g s  o n  t h e  b a c k  o r  t o p  o f  t h e  c a b i n e t  a r e  p r o v i d e d  f o r 
ventilation.  Do  not  block  these  slots.  Never  place  this  product  near  or  over  a 
radiator or heat source unless proper ventilation is provided.  
•  The  monitor  should  be  operated  only  from  the  type  of  power  source  indicated 
on  the  label.  If  you  are  not  sure  of  the  type  of  power  supply  to  your  home, 
consult your dealer or local power company. 
•  Use the appropriate power plug which complies with your local power standard. 
•  Do not overload power strips and extention cords. Overloading can result in fire 
or electric shock.   
•  Avoid  dust,  humidity,  and  temperature  extremes.  Do  not  place  the  monitor  in 
any area where it may become wet. Place the monitor on a stable surface.    
•  Unplug the unit during a lightning storm or if it will not be used for a long period 
of time. This will protect the monitor from damage due to power surges. 
•  Never  push  objects  or  spill  liquid  of  any  kind  into  the  slots  on  the  monitor 
cabinet.    
•  To ensure satisfactory operation, use the monitor only with UL listed  computers 
which have appropriate configured receptacles marked between 100-24 0V AC.  
•  If you encounter technical problems with the monitor, contact a qualified service 
technician or your retailer.  
 
						

							
v
 

Care & Cleaning 
•  Before  you  lift  or  reposition  your  monitor,  it  is  better  to  disconnect  the  cables 
and  power  cord.  Follow  the  correct  lifting  techniques  when  positioning  the 
monitor.  When  lifting  or  carrying  the  monitor,  grasp  the  edges  of  the  monitor. 
Do not lift the display by the stand or the cord. 
•  Cleaning. Turn  your  monitor  off  and  unplug  the  power  cord.  Clean  the  monitor 
surface  with  a  lint-free,  non-abrasive  cloth.  Stubborn  stains  may  be  removed 
with a cloth dampened with mild cleaner. 
•  Avoid  using  a  cleaner  containing  alcohol  or  acetone.  Use  a  cleaner  intended 
for use with the LCD. Never spray cleaner directly on the screen, as it may drip 
inside the monitor and cause an electric shock. 
The . following . symptoms . are . normal . with . the . monitor:
•  The screen may flicker during the initial use due to the nature of the fluorescent 
light.  Turn  off  the  Power  Switch  and  turn  it  on  again  to  make  sure  that  the 
flicker disappears.   
•  You  may  find  slightly  uneven  brightness  on  the  screen  depending  on  the 
desktop pattern you use. 
•  When  the  same  image  is  displayed  for  hours,  an  afterimage  of  the  previous 
screen may remain after switching the image. The screen will recover slowly or 
you can turn off the Power Switch for hours. 
•  When the screen becomes black or flashes, or cannot work anymore,  contact 
your dealer or service center to fix it. Do not repair the screen by yourse lf!  
Conventions. used . in . this . guide
WA R N I N G :  I n f o r m a t i o n  t o  p r e v e n t  i n j u r y  t o  y o u r s e l f  w h e n  t r y i n g  t o 
complete a task. 
CAUTION:  Information  to  prevent  damage  to  the  components  when  trying 
to complete a task. 
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
 
						

							
vi
 
Where to find more information
Refer  to  the  following  sources  for  additional  information  and  for  product  and 
software updates.
1.. ASUS . websites
T h e  A S U S  w e b s i t e s  w o r l d w i d e  p r o v i d e  u p d a t e d  i n f o r m a t i o n  o n  A S U S 
hardware and software products. Refer to http://www.asus.com
2.. Optional . documentation
Your product package may include optional documentation, such as warranty 
card,  that  may  have  been  added  by  your  dealer.  These  documents  are  not 
part of the standard package.
 
						

							
1-1
1.1 Welcome!
Thank you for purchasing the  ASUS  MS226H/MS227N Series LCD monitor!®  
The latest widescreen LCD monitor from  ASUS provides a crisper, broader, and 
brighter display , plus a host of features that enhance your viewing exper ience.  
With these features, you can enjoy the convenience and delightful visua l 
1.2 Package contents
If  any  o f  th e above  it ems  is  damaged  o r  missing,  cont act  your  ret ailer 
immediately .
experience that the MS226H/MS227N Series brings you!   
ASUS LCD Monitor MS226H/MS227N Series
Check your MS226H/MS227N Series LCD package for the following items: 
LCD monitor
   Quick start guide  
Power cord
  VGA  cable
DVI cable (Only for MS227N) 
Power adapter
   Monitor base
Warranty card
HDMI to DVI cable (Only for MS226H)
 
						

							
1-Chapter 1: Product introduction
1.3	 Assembling	 the 	 monitor 	 base
To assemble the monitor base:
Attach the base to the monitor with bundled handy-screw correctly and th\
en put on the 
screw cover.
We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent 
damage to the monitor. 
 
						

							
1.4  Connect cables 
Connect cables which you needMS226H/MS227N
1-3
	
ASUS LCD Monitor  MS226H/MS227N Series
1
2
3
4
Power adapter
 VGA cable
 HDMI to DVI cable (For MS226H) or DVI cable (For MS227N)
Audio cable (For connecting a speaker to play MS226H HDMI audio)
 
						

							
1.  button:
 • Automatically adjust the image to its optimized position, clock, and phase  
 by long pressing this button for -4 seconds (for VGA mode only).
 • Use this hotkey to switch from five video preset modes (Game    
 Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode)  
 with SPLENDID™ Video Intelligence Technology. 
• Exit the OSD menu or go back to the previous menu as the OSD   menu is active.
. 
 
3. MENU Button:  
• Press this button to enter/select the icon (function) highlighted    
 while the OSD menu is activated.
    
4.  Button:
  •  Press this button to increase the value of the function selected    
      or move to the previous function.  
•  This is also a hotkey for Brightness adjustment.    
 (DVI for MS227N; HDMI for MS226H
)

5.            Input Select Button               
	Use this hotkey to switch between VGA and DVI/HDMI input signal.
s
  
  
1.5	 Monitor	introduction
1.5.1	 Front	of	the	LCD	monitor
A
 MS226H/MS227N
1-4 Chapter 1: Product introduction
 Button:
•  Press this button to decrease the value of the function selected           or move to the next fu
nction.  

This is also a hotkey for Contrast Ratio adjustment. 
•
•  Activate OSD menu
 
•