Asus Maximus Hero VII Manual

1-47
11. T_Sensor connector \(2-pin T_SENSOR1\) 
This connector is for the thermistor cable that allows you to monitor th\
e temperature of your motherboard’s critical components and connected devices.
12. M.2 \(Socket 3\)
The M.2 (Socket 3) with M Key supports type 2260 (22 mm x 60 mm) and\
 2280 
(22 mm x 80 mm) PCIe interface storage devices. 
ASUS MAXIMUS VII HERO  
Chapter 1  

1-48
Chapter 1: Product introduction 
Chapter 1  

2-1
Basic Installation
2
2.1 Building your PC system
2.1.1  Motherboard installation
The diagrams in this section are for reference only. The motherboard lay\
out may vary with models, but the installation steps are the same for all models.
1. Install the ASUS Q-Shield to the chassis rear I/O panel.
Chapter 2:  Basic Installation
2. Place the motherboard into the chassis, ensuring that its rear I/O ports\
 are aligned to the chassis’ rear I/O panel.
ASUS MAXIMUS VII HERO  
Chapter 2  

2-2
3. Place nine screws into the holes indicated by circles to secure the moth\
erboard to the chassis.
DO NOT over tighten the screws! Doing so can damage the motherboard.
Chapter 2: Basic Installation 
Chapter 2  

2-3
2.1.2 CPU installation
1
A
B
23
A
B
C45
Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket.
ASUS MAXIMUS VII HERO  
Chapter 2  

2-4
2.1.3 CPU heatsink and fan assembly installation
Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
To install the CPU heatsink and fan assembly
Chapter 2: Basic Installation 
Chapter 2  

2-5
To uninstall the CPU heatsink and fan assembly
ASUS MAXIMUS VII HERO  
Chapter 2  

2-6
1
2
3
To remove a DIMM
2.1.4 DIMM installation
B
A
Chapter 2: Basic Installation 
Chapter 2  

2-7
2.1.5 ATX Power connection
1
2
OR
ASUS MAXIMUS VII HERO  
Chapter 2  

2-8
2.1.6 SATA
2
OR
1
Chapter 2: Basic Installation 
Chapter 2