Asus Maximus Hero VII Manual

5-5
5. Use the up/down arrow key to select a drive, and then press  to select. A small triangle marks the selected drive. Press  after completing your selection.
6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only),and  then press . The available stripe size values range from 4KB to 128KB. The following are typical values:
• RAID 0: 128KB
• RAID 10: 64KB
• RAID 5: 64KB
We recommend a lower stripe size for server systems, and a higher stripe\
 size for...

5-6
Deleting a RAID set
Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set.
To delete a RAID set:
1. From the utility main menu, select 2. Delete RAID Volume and press . The following screen appears:
2. Use the up/down arrow key to select the RAID set you want to delete, and then press . The following warning message appears:
3. Press  to delete the RAID set and return to the utility main menu, or press  to return to the DELETE VOLUME menu.
ALL...

5-7
Exiting the Intel\256 Rapid Storage Technology Option ROM utility
To exit the utility:
1. From the utility main menu, select 5. Exit, and then press . The following warning message appears:
Are you sure you want to e x i t ? (Y/N):
[ CONFIRM EXIT ]
5.2  Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing a Windows® operating system on a hard disk drive that is included in a RAID set.
The motherboard does not provide a floppy drive connector. You have to use a...

5-8
5.2.2 Creating a RAID driver disk in Windows\256
To create a RAID driver disk in Windows\256:
1. Start Windows®.
2.  Plug the USB floppy disk drive and insert a floppy disk.
3.  Place the motherboard support DVD into the optical drive.
4.  Go to the Make Disk menu, and then click Intel AHCI/RAID Driver Disk to create a RAID driver disk.
5.  Select USB floppy disk drive as the destination disk.
6.  Follow the succeeding screen instructions to complete the process.
Write-protect the floppy disk to...

A-1
Appendices
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the following two conditions:
•	This device may not cause harmful interference.
•	This device must accept any interference received including interference\
 that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a\
 Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed \
to...

A-2
IC: Canadian Compliance Statement
Complies	with	the	Canadian	ICES-003	Class	B	specifications.	This	device	complies	with	RSS	210 of Industry Canada. This Class B device meets all the requirements o\
f the Canadian interference-causing equipment regulations. 
This device complies with Industry Canada license exempt RSS standard(s\
). Operation is subject to the following two conditions: (1) this device may not cause\
 interference, and (2) this device must accept any interference, including...

A-3
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and \
Restriction of Chemicals) regulatory framework, we published the chemical substances i\
n our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been d\
esigned to enable proper reuse of parts and recycling. This symbol of the crossed o\
ut wheeled bin indicates that the product (electrical and electronic equipment) shoul\
d not be...

A-4
ASUS contact information
ASUSTeK COMPUTER INC.Address  15 Li-Te Road, Peitou, Taipei, Taiwan 11259Telephone    +886-2-2894-3447Fax     +886-2-2890-7798E-mail  [email protected] site   www.asus.com.com/
Technical SupportTelephone   +86-21-38429911Fax     +86-21-5866-8722, ext. 9101#Online support   http://www.asus.com/tw/support/
ASUS COMPUTER INTERNATIONAL \(America\)Address  800 Corporate Way, Fremont, CA 94539, USATelephone   +1-510-739-3777Fax   +1-510-608-4555Web site   http://www.asus.com/us/...

A-5
EC Declaration of Conformity 
 
We, the \fndersigned, \ban\ffact\frer: ASUSTeK COMPUTER INC. Address: 4F, N\f. 150, \bI-TE Rd., PEITOU, TAIPEI 112, TAIWAN   A\fthorized representative in E\frope:  ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN
 
Co\fntry: GERMANY declare the following apparat\fs: Prod\fct name : \botherboard
 
\bodel name : \bAXI\bUS VII HERO conform with the essential req\firements of the following directives: 2004/108/EC-E\bC Directive   EN 55022:2010+AC:2011...

A-6
Appendices 
Appendices