Asus Kn1 Service Guide

							DISASSEMBLY PROCEDURE 
 
 
 
LCD REMOVAL 4. Pull out cable conn  
 
 
 
 
5. Release se 4pcs screw on the hinge, remove LCD module LCD REMOVAL 
 
 
 
5 
 
 
 
LCD 
DIS-ASSEMBL
Y 
 Disassembling LCD Module 
 
1. Remove 4 rubber pads & screws from the LCD module  
2. Open inside four edges of LCD bezel with your finger, then remove LCD 
bezel form LCD module 
 
 2 - 11  
						

							DISASSEMBLY PROCEDURE 
 
 
 
1
 
 
3.  Remove 14pcs screws and 1pcs screw on the inverter board  
4.  Disconnect left and right on the inverter boar  
 
 
 
 
3
 
 
 4 
 
 
 
 
 2 - 12  
						

							DISASSEMBLY PROCEDURE 
5. Disassemble LCD panel for LCD module, then remove 4pcs screw on 
the left and right LCD bracket 
   
 
 
 
 
5
 
 
TOP cover module TOP COVER 
MODULE. 
 
The illustrations below show how to disassemble and remove the top cover 
module of the notebook.  The module contains the top cover itself and touch 
pad module. 
 
 
Removing Top cover Module TOP COVER 
MODULE 1. Remove 11pcs screws on the base  
 
 
 2 - 13  
						

							DISASSEMBLY PROCEDURE 
 
1
 
2. Remove 3pcs screw on the top   
 
 
 
2 
 
 
3. Release touch pad cable   
 
 
 2 - 14  
						

							DISASSEMBLY PROCEDURE 
 
 
 
 
 
4. Remove the top cover from left side 
 
 
 
 
 
 
Removing Motherboard module M/BMODULE 
REMOVAL 
 
 
1. Release 3pcs screw on the M/B and 2pcs nut on the CRT conn  
 
 
 2 - 15  
						

							DISASSEMBLY PROCEDURE 
 
 
 
 
 
 
2. Release 2pcs screw on modem board, pull out modem board  
 
 
 
 
 
3. Disconnect speaker cable conn from motherboard 
 2 - 16  
						

							DISASSEMBLY PROCEDURE 
 
 
 
 
5. Remove M/B module carefully pry out left side to remove audio jack 
first ,then remove IO port from front side to separate the M/B from base 
module  
 
 
 
 
 
 
 
 
 
 
 
 2 - 17