Asus A7v Service Guide
Have a look at the manual Asus A7v Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 7
Disassembly procedure
2 - 7 2. Turn the non-removable screw 180 degrees counter-clockwise to loosen
the CPU. Squeeze the vacuum handling pump and use it to lift the CPU
away.
3. Don’t touch the die above the CPU.
4. Remove the CPU away.
5. Remove CPU thermal pad from CPU die with a pair of tweezers.
6. Remove 2 screws [M2 *3(L)] and disconnect the fan...](http://img.usermanuals.tech/thumb/8/59883/w64_asus-a7v-service-guide-6.png "Page 7
Disassembly procedure
2 - 7 2. Turn the non-removable screw 180 degrees counter-clockwise to loosen
the CPU. Squeeze the vacuum handling pump and use it to lift the CPU
away.
3. Don’t touch the die above the CPU.
4. Remove the CPU away.
5. Remove CPU thermal pad from CPU die with a pair of tweezers.
6. Remove 2 screws [M2 *3(L)] and disconnect the fan...")
![Page 8
Disassembly procedure
2 - 8
ODD Module
The illustration below shows how to remove the ODD module.
1. Remove the rubber and remove 2 screws [M2 * 4(L)] from the bottom
case.
2. Put the screw driver here and push the ODD drive out from the NB.
ODD MODULE](http://img.usermanuals.tech/thumb/8/59883/w64_asus-a7v-service-guide-7.png "Page 8
Disassembly procedure
2 - 8
ODD Module
The illustration below shows how to remove the ODD module.
1. Remove the rubber and remove 2 screws [M2 * 4(L)] from the bottom
case.
2. Put the screw driver here and push the ODD drive out from the NB.
ODD MODULE")
![Page 10
Disassembly procedure
2 - 10
Main Memor y Module
The A7V Series Notebook has two expansion SO-DIMM slots for you to upgrade the total
memory up to 2GB with two DDR2-533 1024 MB SO-DIMM RAM modules, here
introduce you the main memory slot.
Removing Memory module
1. Remove 1 screws [M2 * 4(L)] and take the DIMM door away.
2. Remove the Memory module by opening the latches...](http://img.usermanuals.tech/thumb/8/59883/w64_asus-a7v-service-guide-9.png "Page 10
Disassembly procedure
2 - 10
Main Memor y Module
The A7V Series Notebook has two expansion SO-DIMM slots for you to upgrade the total
memory up to 2GB with two DDR2-533 1024 MB SO-DIMM RAM modules, here
introduce you the main memory slot.
Removing Memory module
1. Remove 1 screws [M2 * 4(L)] and take the DIMM door away.
2. Remove the Memory module by opening the latches...")
![Page 11
Disassembly procedure
2 - 11
Top Case Module
The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module.
Removing Top Case Module
1. Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover.
2. Remove 2 screws [M2 * 4(L)] and disconnect the...](http://img.usermanuals.tech/thumb/8/59883/w64_asus-a7v-service-guide-10.png "Page 11
Disassembly procedure
2 - 11
Top Case Module
The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module.
Removing Top Case Module
1. Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover.
2. Remove 2 screws [M2 * 4(L)] and disconnect the...")
![Page 12
Disassembly procedure
2 - 12 5. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the
both side.
6. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge.](http://img.usermanuals.tech/thumb/8/59883/w64_asus-a7v-service-guide-11.png "Page 12
Disassembly procedure
2 - 12 5. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the
both side.
6. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge.")
![Page 13
Disassembly procedure
2 - 13 7. Remove 4 screws [M2.5 * 8(L)] on the Bottom case.
8. Separate LCD Module from the Top case module.](http://img.usermanuals.tech/thumb/8/59883/w64_asus-a7v-service-guide-12.png "Page 13
Disassembly procedure
2 - 13 7. Remove 4 screws [M2.5 * 8(L)] on the Bottom case.
8. Separate LCD Module from the Top case module.")
![Page 14
Disassembly procedure
2 - 14 9. Remove 8 screws [M2 * 4(L)] on the top case.
10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD
FPC from the motherboard.
11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on
the bottom case.
Launch BD
Speaker cable
Touchpad Audio FPC
M2*8L
M2*6L](http://img.usermanuals.tech/thumb/8/59883/w64_asus-a7v-service-guide-13.png "Page 14
Disassembly procedure
2 - 14 9. Remove 8 screws [M2 * 4(L)] on the top case.
10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD
FPC from the motherboard.
11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on
the bottom case.
Launch BD
Speaker cable
Touchpad Audio FPC
M2*8L
M2*6L")
![Page 15
Disassembly procedure
2 - 15 12. Remove 3 screws [M2 * 3(L)] on the bottom case.
13. Remove 8 screws [M2 * 4(L)] on the bottom case.
14. Now you can separate the Top case from the Bottom case.](http://img.usermanuals.tech/thumb/8/59883/w64_asus-a7v-service-guide-14.png "Page 15
Disassembly procedure
2 - 15 12. Remove 3 screws [M2 * 3(L)] on the bottom case.
13. Remove 8 screws [M2 * 4(L)] on the bottom case.
14. Now you can separate the Top case from the Bottom case.")
![Page 16
Disassembly procedure
2 - 16
Removing Touch Pad Module
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
Removing LAUNCH BD. module
1. Remove 1 yellow mylar and disconnect the FPC.
2. Remove 4 screws [M2 * 4(L)]...](http://img.usermanuals.tech/thumb/8/59883/w64_asus-a7v-service-guide-15.png "Page 16
Disassembly procedure
2 - 16
Removing Touch Pad Module
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
Removing LAUNCH BD. module
1. Remove 1 yellow mylar and disconnect the FPC.
2. Remove 4 screws [M2 * 4(L)]...")
Disassembly procedure
2 - 11
Top Case Module
The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module.
Removing Top Case Module
1. Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover.
2. Remove 2 screws [M2 * 4(L)] and disconnect the Coaxial cable & Inverter
cable with tweezers.
3. Carefully pull out the Antenna from the bottom case.
4. Remove 2 screws [M2.5 * 8(L)] on rear side.
TOP CASE
MODULE
TOP CASE
MODULE
REMOVE
Coaxial cable
Inverter cable
Disassembly procedure
2 - 12 5. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the
both side.
6. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge.
Disassembly procedure
2 - 13 7. Remove 4 screws [M2.5 * 8(L)] on the Bottom case.
8. Separate LCD Module from the Top case module.
Disassembly procedure
2 - 14 9. Remove 8 screws [M2 * 4(L)] on the top case.
10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD
FPC from the motherboard.
11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on
the bottom case.
Launch BD
Speaker cable
Touchpad Audio FPC
M2*8L
M2*6L
Disassembly procedure
2 - 15 12. Remove 3 screws [M2 * 3(L)] on the bottom case.
13. Remove 8 screws [M2 * 4(L)] on the bottom case.
14. Now you can separate the Top case from the Bottom case.
Disassembly procedure
2 - 16
Removing Touch Pad Module
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
Removing LAUNCH BD. module
1. Remove 1 yellow mylar and disconnect the FPC.
2. Remove 4 screws [M2 * 4(L)] and take away the Launch BD. module.
TOUCH
PAD
MODULE
REMOVE
LAUNCH BD
MODULE
REMOVE
Disassembly procedure
2 - 17
Removing Audio board module
1. Remove 2 yellow mylar and disconnect the FPC.
2. Remove 2 screws [M2 * 4(L)] and take away the Launch BD. module.
Removing Speaker module
1. Remove 6 screws [M2 * 4(L)] on the both side.
2. Remove 2 yellow mylar and take away the both speaker module.
AUDIO BOARD
MODULE
REMOVE
SPEAKER
MODULE
REMOVE
Disassembly procedure
2 - 18
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover.
Please do not disassemble the individual parts.
Disassembling LCD Module
1. Remove 8 rubber pads. And then 8 screws [M2.5 * 8(L)] underneath them.
2. Carefully pry the inside edges of the LCD front bezel and remove the LCD
front cover.
LCD
MODULE
LCD
DISASSEMBLY
Disassembly procedure
2 - 19
3. Remove 2 screws [M2.5 * 5(L)] and disconnect the coaxial cable & LCD
cable then remove the inverter board.
4. Remove 2 screws [M2.5 * 8(L)] and remove the LCD bottom bracket from the
LCD cover.
5. Remove 2 screws [M2 * 5(L)] and remove the LCD module from the LCD
back covert.
Disassembly procedure
2 - 20
6. Remove 4 screws [M2* 3(L)] & 4 screws on the other side.
7. Remove 1 yellow tape and disconnect the coaxial cable from LCD.
8. Remove 1 yellow tape and remove CCD module then disconnect the CCD
cable.