Asus A3000n Service Guide

DISASSEMBLY PROCEDURE 
 3 - 21 
 
7.  Remove 6 screws (no.17-22) [M2*3L(K) B-NI, NYLOK] on both sides to 
separate the LCD brackets from the panel. 
 
 
 
 
 
8.  Disconnect the cable on the back of LCD panel. 
 
 
18 
17 
21 
19 
22 
20  

DISASSEMBLY PROCEDURE 
 3 - 22 
 
9.  Tear of the tape and disconnect the cable from CCD module. 
 
 
 
10.  Remove CCD module. 
 
  

DISASSEMBLY PROCEDURE 
 3 - 23 
 
11.  Tear the tape on aluminum foil and Remove the cable and microphone. 
  

DISASSEMBLY PROCEDURE 
 3 - 24 
 Top Case Module 
The illustrations below show how to disassemble and remove the top case module of 
the notebook.  The module contains the top case itself, touch pad module. 
 
Removing Top Case Module  
1.  Remove 2 screws (no.1, no.2) [M2*4L(K) B-NI] at back side of notebook. 
 
 
 
2.  Remove 3 screws here (no.3-5) [M2*3L] 
 
 
TOP CASE 
MODULE 
 
TOP CASE 
MODULE 
REMOVE 
 
1 2 
3 
5  4  

DISASSEMBLY PROCEDURE 
 3 - 25 
 
3.  Remove 5 screws here (no.6-10) [M2*4L]. 
 
 
 
4.  Remove 5 screws here (no.11-15) [M2*6L]  
 
 
 
9 8 6 
7 
10 
14 12 
11 13 
15  

DISASSEMBLY PROCEDURE 
 3 - 26 
 
5.  Lift it up to release the top case. 
 
 
 
Removing Touch Pad Module  
1.  Remove 6 screws here (No.16-21) [M2 * 3L] 
 
 
 
2.  Disconnect the FPC cable and then remove the touchpad module. 
 
TOUCH PAD 
MODULE 
REMOVE 
 16 
17 
19 
18 
20 
21  

DISASSEMBLY PROCEDURE 
 3 - 27 
 
Motherboard Module 
The illustrations below show how to disassemble and remove the motherboard 
module of the notebook. The module contains the motherboard itself, modem card 
module. 
 
Removing Modem card  
1.  Remove 2 screws  (no.1-2) (M2*2.5L (K) W-NI)on the modem card. 
 
 
 
2.  Pull out the modem card from motherboard. 
 
3.  Remove the tape and disconnect the cables (no.3) from modem card and 
motherboard.  
 
 
MOTHERBOARD
 
MODEM CARD 
REMOVAL 
 
2 
1 
3  

DISASSEMBLY PROCEDURE 
 3 - 28 
 
Removing Motherboard  
 
1.  Disconnect the connector of speaker  (no.4) on motherboard. 
 
 
 
2.  Remove 5 screws  (no.5-9)
（M2*4L
）on motherboard.  
 
 
MOTHERBOARD 
REMOVAL 
 
4 
9 
8 
7 
5 
6  

DISASSEMBLY PROCEDURE 
 3 - 29 
 
3.  Lift the motherboard up a little bit and push aside the bottom case, and then 
separate motherboard module from the bottom case at an angle of 20 degree. 
 
 
 
30o  

DISASSEMBLY PROCEDURE 
 3 - 30 
Bottom Case Module 
The illustrations below show how to disassemble and remove the bottom case module 
of the notebook.  The module contains the bottom case itself and speakers. 
 
Removing Speakers 
1.  Remove the 4 screws  (no.1-4)
（M2*3L
）on both ends. 
 
 
 
 
 
4.  Lift up both speakers and speaker cable away from the bottom case.  
 
 
BOTTOM 
CASE 
MODULE 
3 
4 
1 
2 
 SPEAKERS 
REMOVAL