Asus 27t1e Users Manual

							ASUS LCD TV Monitor T1 Series  11
2.5 Setting the Monitor 
Set the PC signal to the optimal resolution and frequency for the best picture quality. 
 Resolution Vertical 
frequency 
Horizontal 
frequency 
Pixel 
frequency 
720 x 400  70Hz  31.47KHz  28.32MHz 
640 x 480  60Hz  31.47KHz  25.17MHz 
640 x 480  72Hz  37.86KHz  31.50MHz 
640 x 480  75Hz  37.50KHz  31.50MHz 
800 x 600  56Hz  35.16KHz  36.00MHz 
800 x 600  60Hz  37.88KHz  40.00MHz 
800 x 600  72Hz  48.08KHz  50.00MHz 
800 x 600  75Hz  46.88KHz  49.50MHz 
848 x 480  60Hz  31.02KHz  33.75MHz 
1024 x 768  60Hz  48.36KHz  65.00MHz 
1024 x 768  70Hz  56.48KHz  75.00MHz 
1024 x 768  75Hz  60.02KHz  78.75MHz 
1152 x 864  75Hz  67.50KHz  108.00MHz 
1280 x 720  60Hz  44.77KHz  74.51MHz 
1280 x 768  60Hz  47.78KHz  79.50MHz 
1280 x 768  75Hz  60.29KHz  102.25MHz 
1280 x 800  60Hz  49.70KHz  83.50MHz 
1280 x 960  60Hz  60.00KHz  108.00MHz 
1280 x 1024  60Hz  63.98KHz  108.00MHz 
1280 x 1024  75Hz  79.98KHz  134.99MHz 
1360 x 768  60Hz  47.71KHz  85.49MHz 
1366 x 768  60Hz  47.10KHz  72.43MHz 
1600 x 900  60Hz  55.70KHz  118.60MHz 
1400 x 1050  60Hz  65.32KHz  121.75MHz 
1680 x 1050  60Hz  65.29KHz  146.24MHz 
1920 x 1080  60Hz  67.50kHz  148.50MHz 
 
1920 x 1200  60Hz  74.04kHz  154.00MHz 
▪  Modes not listed in the table may possibly not be supported. 
▪ Press 
  button for 2 – 3 seconds if noise, trembling, or picture offset appears 
on the screen while VGA input in use. 
 
						

							ASUS LCD TV Monitor T1 Series  12 
2.6 Setting the Television 
1. Press  MENU button either on the key pad of the display or on the remote 
controller and useW, S, X, T, and 
  buttons to select “Programme”. 
 
2.  Select “Auto Programme” and choose the country of the broadcasting system. 
3.  Select “Start” to scan all the available channels and store them in the memory. 
 
▪  For further information of setting the TV, please read the chapter 3.1.2. 
 
						

							ASUS LCD TV Monitor T1 Series  13
2.7 Using Teletext 
You can control Teletext functions only by 
remote controller. The key pad on the 
display set does not provide with such 
functions. 
Press TTX 
  button to display Teletext. 
Press it again or 
 EXIT button to switch off 
Teletext. 
1. SIMPLE Text 
▪  Enter the three-digit page number 
with the number buttons to display 
your desired page. 
▪ Press 
 or   to display the 
preceding or the following page. 
2. TOP Text 
▪  Press the blue button to select the 
desired block 
▪  Press the yellow button to select 
the next group. 
▪  Press the green button to display 
the next page. The 
 button can 
also do the same. 
▪  Press the red button to display the 
preceding page. The 
 button 
can also do the same. 
▪  Like SIMPLE Text, you can enter 
the three-digit page number with 
the number buttons to display your desired page. 
3. Teletext functions 
▪ 
 Teletext Hold to hold and to continue the automatic page change when 
the Teletext page has more than one sub-page. 
▪ 
 Teletext Size to double the text size of the upper or the lower half of the 
page, and to switch back to ordinary text size. 
▪ 
 Teletext Reveal to reveal and to hide the concealed information, such 
as answer of riddles. 
▪ 
 Teletext Sub-Page to select a sub-page in Teletext and to exit from this 
function. 
▪ 
 Teletext Cancel to display the broadcast while searching for a certain 
Teletext page. 
 
						

							ASUS LCD TV Monitor T1 Series  14 
2.8  Electronic Programme Guide (EPG) 
This EPG information is transmitted by the broadcaster and may not be available in 
some countries or regions.   
You can control EPG functions only by remote controller. The key pad on the display 
set does not provide with such functions. 
Press EPG button to display Electronic Programme Guide. The programme 
information along the time axis will be displayed. You can scroll the time axis forward 
and backward to see more information. Press EPG button again or 
 EXIT button to 
switch off EPG.   
Use 
 or   to display the preceding or the following page. Use S, X, T, W, and 
ENTER
  to select and display the desired programme if it is playing. Press  to 
display the information of the selected programme. 
EPG can remind you when your desired programme is to play. Press the blue button 
to enter the reminder function. There you can specify the programme and the time 
that should be reminded to you. You can also decide whether the programme should 
be reminded only once or periodically. 
Press the green button to display the schedule list. It can tell you the schedule of the 
programmes set to remind you.   
2.9 Programme List 
1. Programme List 
The programme list will be displayed by pressing 
  button on the remote 
controller. You can control the programme list only by remote controller. The key 
pad on the display set does not provide with such functions. 
You may use the S T buttons to move the highlighted item. Press ENTER
 to 
enter the highlighted programme. You can see a 
  icon for a locked programme 
and a 
  icon for a favourite programme. The following icons indicate the type of 
a programme. 
 Digital television programme 
 Analogue television programme 
 Radio channel 
2.  Favourite Programme List 
The favourite programme list will be displayed by pressing 
  button on the 
remote controller. You can control the favourite programme list only by remote 
controller. The key pad on the display set does not provide with such functions. 
Please read chapter 3.1.2 Programme Edit for specifying your favourite 
programmes. 
 
						

							ASUS LCD TV Monitor T1 Series  15
3.1 On-Screen Display (OSD) Menu 
3.1.1  How to reconfigure 
1. Press  MENU button either on the key pad of the display or on the remote 
controller to activate the OSD menu. 
2. Use W, X, S, and T to navigate through the functions. The chosen function will 
be highlighted. To activate the chosen function, press ENTER
  button. If the 
selected function has a sub-menu, still use W, X, S, and T to navigate through 
the sub-menu functions. Again, the chosen function will be highlighted and you 
may activate it by pressing ENTER
 button. 
3. Use W, X, S, or T to change the settings of the activated function. 
4.  You can go back to the top level of the OSD menu list whenever you press the 
 MENU button. Repeat step 2 and 3 to adjust any other function. 
5.  To exit from the OSD menu, press the 
  key on the key pad of the display set 
or 
 EXIT button on the remote controller.   
 
						

							ASUS LCD TV Monitor T1 Series  16 
3.1.2  OSD menu introduction 
1. System 
▪ Menu Language: to select the language of the display messages among 
English, German, French, Italian, Spanish, Polish, Dutch, Greek, Czech, 
Portuguese, Hungarian, Slovak, Danish, Swedish, Finnish, Russian, 
Estonian, Latvian, Lithuanian, Norwegian, Romanian, Bulgarian, Serbian, 
Croatian, and Turkish. 
▪ Audio Languages: to select your preferred language for audio. You can 
also select audio language with the I / II button on the remote controller when 
more than one audio language is broadcasted.   
You will see the
icon if the broadcast has the assistance function for 
visual impaired people. 
▪ Subtitle Languages: to select your preferred language when more than 
one subtitle language is broadcasted. You can also select Subtitle language 
with the SUB.T 
  button on the remote controller. 
Hearing Impaired: to turn on the hearing impaired subtitle if it is transmitted 
by the broadcaster.   
You will see the
icon if the broadcast has the assistance function for 
hearing impaired people. 
▪ Lock System: to set the system password and to turn on or off the lock to 
prohibit from accessing to some functions. Password is required to access 
this function. 
▪ Remote Control Only: to disable the control function of the key pad on the 
display set to avoid undesired operation from the set. 
 This function can be disabled by pressing 
 and W together in 
case of malfunction of remote controller. 
▪ Set Password: to set your four-digit password for Lock System. You have to 
confirm your input to validate it. The default password is “0000”. 
 The password “7788” will ALWAYS be accepted in case you forget 
your password. 
▪ Parental Control: to prohibit unauthorized users, such as children, from 
watching specific programmes. Password is required to access this function. 
When you enable this function, you may block programmes that are listed in 
the programme list. Once a programme is locked, you can see a 
 icon on 
the Lock Programme list and also on the general Programme List. 
▪ OSD Time Out: to specify the idle time of displaying the OSD menu before it 
is deactivated. 
▪ Reset All: to restore all the settings back to the factory default. Password is 
required if “Lock System” is on. 
 
						

							ASUS LCD TV Monitor T1 Series  17
2. Programme – This function is to set the TV channels and programmes. 
▪ Auto Programme: Choose the country of the broadcasting system and than 
select “Start” to scan all the available channels and store them in the 
memory. Password is required if “Lock System” is on. 
▪ DTV Manual Programme: To manually set the programme list of digital 
broadcasts. You need to specify the channel number of UHF or VHF band 
and then let the system search the signal. Password is required if “Lock 
System” is on. 
▪ ATV Manual Programme: To manually set the programme list of analogue 
broadcasts. You need to specify the broadcasting system and the channel 
number then let the system search it. You are provided with the option of 
fine tuning the signal. Password is required if “Lock System” is on. 
 BG:  PAL B/G or SECAM B/G (usually in Europe, Asia, Middle 
East, Australia, New Zealand, and Africa) 
DK:  PAL D/K or SECAM D/K (usually in East Europe, China, 
Africa, and CIS countries) 
I:  PAL I/II (usually in UK, Ireland, Hong Kong, and South Africa)
L:  SECAM L/L’ (usually in France) 
▪ Programme Edit: To edit the programme list. You can lock or skip certain 
channels or list some to the table of favourite programmes. Password is 
required if “Lock System” is on. 
You may use the S T buttons to move the highlighted item. If you would like 
to list the highlighted programme to the favourite programme list, please 
press 
  button on the remote controller. Press the button again to remove 
it from the favourite programme list. You may press the blue button to skip 
the channel. The function will be deactivated by pressing the same button 
again. The red button is to delete the channel from the programme list. The 
display will ask for your confirmation for selecting this function. 
 This is a favourite programme.
 This channel is to be skipped. 
 This channel is to be deleted. 
▪ CI Information: To display the information of your CAM, Conditional Access 
Module, in the CI card slot. 
 CAM is not an accessory of this product. It is generally provided by 
your Pay-TV services provider. 
 
 
						

							ASUS LCD TV Monitor T1 Series  18 
3. Picture 
▪ Splendid: to switch among Standard, Theatre, Game, and Scenery video 
mode of Splendid™ Video Enhancement Technology. 
- Theatre Mode: best choice for watching films with Splendid™ Video 
Intelligence Technology. 
- Scenery Mode: best choice for scenery photo display with Splendid™ 
Video Intelligence Technology. 
- Game Mode: best choice for game playing with Splendid™ Video 
Intelligence Technology. 
- Standard Mode: best choice for document editing with Splendid™ 
Video Intelligence Technology. 
In this mode, you may adjust Sharpness, Colour, and Tint to define your 
preferred picture effect. 
▪ Sharpness: to adjust the sharpness of the displayed picture; this function is 
active only in Standard Splendid™ mode. 
▪ Colour: to adjust the colour of the displayed picture deeper or paler; this 
function is active only in Standard Splendid™ mode and VGA input not in 
use. 
▪ Tint: to make the displayed picture more red or green; this function is active 
only when input is NTSC by Video port. 
 You may NOT adjust Colour, or Tint for VGA input. 
▪ Brightness: to adjust the luminance of the display. 
▪ Contrast: to adjust the contrast of the displayed picture. 
▪ Colour Temperature: to select the colour temperature among warm, 
ordinary, cool, and user’s mode. In user’s mode, you may adjust the level of 
the red, green, and blue to define your preferred white colour. 
▪ ASCR: to switch on and off the ASUS Smart Contrast Ratio function. 
▪ Noise Reduction: to specify the intense of noise reduction function among 
high, moderate, low, and off. 
▪ Reset Picture: to reset all the picture parameters. 
 
						

							ASUS LCD TV Monitor T1 Series  19
4. Sound 
▪ Sound Mode: to switch among Vocal, Rock, Soft, Boom, and Standard 
sound mode. 
- Vocal: to emphasize the human voice for news report or speech 
- Rock: to emphasize bass the treble for rock music 
- Soft: to slightly increase bass and treble for soft music 
- Boom: to emphasize low tone for fighting games 
- Standard: to adjust the equalizer to define your preferred sound effect. 
▪ Equalizer: to set the level of each frequency band varying from low to high 
pitch 
 Equalizer is active ONLY in Standard sound mode. 
▪ Balance: to adjust the sound balance of the speakers to your preferred 
levels 
▪ Auto Volume: to automatically keep the volume level equal even if 
changing programmes 
▪ Surround Sound: to turn on and off the simulated surround sound system 
 
						

							ASUS LCD TV Monitor T1 Series  20 
5. Display 
▪ Aspect Ratio: to change the aspect ratio of the displaying image among 
Wide, Square, Zoom1, Zoom2, Panorama, and Auto 
- Wide: to fit pictures to 16:9 wide full screen 
- Square: to leave the left and right sides of the screen blank to display 
4:3 format pictures 
- Panorama: to fit the 4:3 signal into the 16:9 wide screen by keeping the 
centre of the picture in the same aspect ratio and stretching the both 
sides more 
- Zoom1: to stretch the centre of 2.35:1 pictures to the top and bottom of 
the screen and leave the left and right sides of the picture outside the 
screen being un-displayed 
- Zoom2: to stretch the centre of 1.85:1 pictures to the top and bottom of 
the screen and leave the left and right sides of the picture outside the 
screen being un-displayed 
- Auto: to automatically select the screen aspect ratio according to the 
broadcasting signal 
▪ Auto Configuration: to automatically adjust the display parameters for VGA 
signal. This function is active only for VGA input. 
This function can be activated also by pressing 
  key on the key pad of 
the display set when VGA input in use. 
▪ Manual Configuration: to specify the display position, clock, and phase of 
the display for VGA signal. This function is active only when VGA input 
source is selected. 
6. Time 
▪ Clock: to set the current time. This function is inactive when “Sync Time” is 
on. 
▪ Off Time: to specify the time when the display automatically turns off. The 
off-time can be set one-time or repeated. 
▪ On Time: to specify the time when the display automatically turns on. You 
can also specify the signal source and volume when it is turned on. The 
on-time can be set one-time or repeated. 
▪ Auto Off: to switch the display off when no signal from the input source is 
detected for 10 minutes. 
▪ Time Zone: to specify your time zone. 
▪ Sync Time: to automatically get time information from broadcasting signal 
▪ Sleep Timer: to set a countdown of 15, 30, 60, 90, 120, 180, 240 minutes till 
the display automatically switches off.