Asko W6884 Operating Instructions

1
Sort your laundry.
See the "Advice and Tips before washing"
section.
Place underwired bras in a laundry net.
Empty pockets. Coins, nails and the like can
cause damage to the machine and fabrics. See
the "Advice and Tips" section before washing.
2 Turn on the main power switch
3 Open the washer door and load
the washing
If the washer door is closed, press the Door
opening button (key symbol). The door opens
once all water has drained from the machine.
Load the washing. The wash program...

5
Select the program You select a program by turning the program selector. The selected program is shown in the display.
Now use the option buttons to select any options. See chapter "Select options".
1. Auto
This program automatically adjusts the length of
the main wash and the number of rinses to the
amount and type of laundry loaded in the
machine.
2. Time program
This program adjusts itself to the specified time
frame or finish time. When using this program, it
is however important to select...

6. Quick
Fast program for laundry that just needs
freshening up. The program can be run at any
temperature, so follow the washing instructions
for each garment. The lower the selected
temperature, the shorter the program time.
Garments worn next to the skin ought to be
washed at 60°C. The spin speed can be selected
freely.
7. Easy Care
Program for blended materials, permanent press
shirts and functional sports clothing. The program
has a high water level and as such is also suitable
for cushions, quilted...

Program chart
Program time
(approx. hrs and
min.)
Energy consump-
tion
(approx. kWh)
Water consump-
tion
(approx. liter)
Max. load
Spin Speed
rpm
Number of
Rinses
Temp. °C
Pre-
wash
Program
1. Auto
2. Time program
2:45
2,2
85
7
1600
5
95X
3. Heavy
2:40
1,2
75
7
1600
5
60X
3:21
1,13
60
7
1600
2
60
4. Normal
3:06
0,47
60
7
1600
2
40
1:40
1,1
60
7
1600
3
60
5. Colour/White
0:40
0,4
25
3,5
1600
2
40
6. Quick
1:20
0,5
50
3,5
1200
2
40
7. Easy Care
1:20
0,4
30
3,5
800
3
40
8. Synthetics
0:45
0,5
70
2,3
800
3...

6
Select options
You can select options to adjust the wash program to suit your own specific requirements. The
available options depend on the selected program. If the option is available for the selected program,
the symbols lights up when you press the button.
The machine will remember the options you select for each program (with one exception – Delayed Start).
You can still change the selected options the next time you select the program in question. Temperature
• Select the temperature by pressing...

High water level
Use High water level if a garment's laundry label shows this symbol. High water level means that additional
water is used during the main wash and rinse cycles.
• Select High water level by pressing the button under the symbol.
• The symbol above the button lights when this option is activated. Note!
The machine takes in the additional water for the high water level about 15 minutes after the main wash
has started.
Anti crease
Anti crease means that the drum will rotate for three...

7
Close the washer door and
press the Start/Stop button Note!
A few seconds after you start a program the
washing machine will begin to fill with water from
both the hot and the cold supplies. If for some
reason no hot water is available, the machine
waits for one minute and then fills with cold water
only. The wash drum does not start to rotate
until it begins to fill with water.
Time remaining
The time remaining is shown in hours and
minutes. Once a program is selected, the
estimated program time is...

You can change the following settings:
•
Child-safe
• Door opening
• Language
• Temperature
• Extra rinses
• Hot water
How to choose the settings:
1. Turn off the machine using the main power switch.
2. Press the Door opening button and switch on the machine with the main power switch. Then press
the Door opening button 5 times within 10 seconds.
3. Select the setting you want to change by turning the program selector.
4. Press the Door opening button once to select the setting.
5. Change and save the...

Hot water
However, if you choose to connect your ECO-machine to only the cold water it is important that you shut
off the hot water connection. Now select "Hot water Off". If your machine is connected to both hot and
cold water, you should select "Hot water On".
1.
Turn the program selector. Select "Hot water Off" for a cold water connection or "Hot water On" if the
machine is connected to both hot and cold water.
2. Press the Door opening button once to save the setting....

Cleaning the trap and the drainage
pump
The washing machine has a trap where coins,
hairpins and the like can collect. To clean the trap
and the drainage pump, do as follows:
1.
Make sure the machine is empty of water and
switched off at the mains. 2.
Open the door. 3.
Unhook the drainage hose from the connector
inside the door and drain the water into a
suitable container, such as a bowl. 4.
Turn the cover anti-clockwise to open the
pump. Remove the cover. 5.
Remove any items and so forth from the pump...