Asko W6564 Operating Instructions

1
Sort your laundry.
See the "Advice and Tips before washing"
section.
Place underwired bras in a laundry net.
Empty pockets. Coins, nails and the like can
cause damage to the machine and fabrics. See
the "Advice and Tips" section before washing.
2 Turn on the main power switch
3 Open the washer door and load
the washing
If the washer door is closed, press the Door
opening button (key symbol). The door opens
once all water has drained from the machine.
Load the washing. The wash program...

5
Select the program You select a program by turning the program selector. An LED lights up beside the selected program
and the estimated program time is shown in the display. The program time is based on the time last taken
by the same program. Use the option buttons to select any options.
1. Auto
This program automatically adjusts the length of
the main wash and the number of rinses to the
amount of laundry loaded in the machine.
2. Heavy
Program for heavily soiled laundry, with dirt that
needs to be...

6. Easy Care
Program for blended materials, permanent press
shirts and functional sports clothing. The program
has a high water level and as such is also suitable
for cushions, quilted jackets and the like. Read
the washing instructions carefully and remember,
for example, that fabric softener must not be used
with the membranes found in some outer
garments. A washing temperature up to 60°C and
a spin speed up to 1200 rpm can be selected.
7. Synthetics
Program for delicate fabrics made of synthetic...

Program chart
Program time
(approx. hrs and
min.)
Energy consump-
tion
(approx. kWh)
Water consump-
tion
(approx. liter)
Max. load
Spin Speed
rpm
Number of
Rinses
Temp. °C
Pre-
wash
Program
1. Auto
2:45
2,2
85
7
1600
5
95X
2. Heavy
2:40
1,2
75
7
1600
5
60X
À:21
1,13
60
7
1600
2
60
3. Normal
3
:06
0,47
60
7
1600
2
40
1:40
1,1
60
7
1600
3
60
4. Colour/White
0:40
0,4
25
3,5
1600
2
40
5.

Quick 1:20
0,5
50
3,5
1200
2
40
6. Easy Care
1:20
0,4
30
3,5
800
3
40
7. Synthetics
0:45
0,5
70
2,3
800
3
30
8....

6
Select options
You can select options to adjust the wash program to suit your own specific requirements. The
available options depend on the selected program. If the option is available for the selected program,
the symbols lights up when you press the button.
The machine will remember the options you select for each program (with one exception – Delayed Start).
You can still change the selected options the next time you select the program in question. Temperature
• Select the temperature by pressing...

High water level
High water level means that additional water is used during the main wash and rinse cycles. This option
can be used with all programs except Wool/hand wash, Rinse and Spin & Drain.
• Select High water level by pressing the button by the symbol.
• An LED next to the button lights when this option is activated. Note!
The machine takes in the additional water for the high water level about 15 minutes after the main wash
has started.
Super wash
Super wash can be selected to better dissolve...

7
Close the washer door and
press the Start/Stop button
Time remaining
The time remaining is shown in hours and
minutes. Once a program is selected, the
estimated program time is displayed. This may
differ from time to time depending on the
temperature of the water entering the machine
and the size of the load. If the program time is
longer than the previous wash with the same
program, '0:01' will be displayed until the program
finishes. This is normal! The next time you use
the program under...

You can change the following settings:
Automatic door opening.
Extra rinses.
Door opening
If you choose Automatic door opening the Washer door will open once the program has finished.
1.
Turn off the machine using the main power switch.
2. Press the Super Rinse button and then the main power switch.
3. 'AdO' is shown on the display if Automatic door opening is activated or 'AdF' if the option has not been
activated.
4. Press the Super Rinse button to change the setting.
5. Press the Door...

Cleaning the trap and the drainage
pump
The washing machine has a trap where coins,
hairpins and the like can collect. To clean the trap
and the drainage pump, do as follows:
1.
Make sure the machine is empty of water and
switched off at the mains. 2.
Open the door. 3.
Unhook the drainage hose from the connector
inside the door and drain the water into a
suitable container, such as a bowl. 4.
Turn the cover anti-clockwise to open the
pump. Remove the cover. 5.
Remove any items and so forth from the pump...

Cleaning the inside of the machine
to avoid unpleasant smells
Modern detergents often allow clothes to be
washed at low temperatures. This means that
small deposits can build up in the machine. These,
in turn, may lead to unpleasant smells developing;
especially if constantly using cold wash.
To avoid this, we recommend running a 95°C
wash program once a month. When you do this,
use a small quantity of detergent. It is not
necessary to put any washing in the machine.
20 Care and cleaning