Home > ASK > Projector > ASK Impression 960 User Guide

ASK Impression 960 User Guide

Add to Favourites

Download as PDF Print this page Share this page

Have a look at the manual ASK Impression 960 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 39 ASK manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

Page 31 USER GUIDELCD PROJECTOR30 The lamp has only 50 hours burning time left, and should be changed.
Remember that you can check accumulated lamp usage each time the
lamp is activated. A message appears in the lower left hand corner of the
screen stating software revision and lamp hours used.
If you do not respond to the first message, a second message will appear
when the lamp has exceeded recommended burning time. Please read
Warnings and Notes in Lamp Replacement section carefully before
proceeding with...

Page 32 USER GUIDELCD PROJECTOR31 If you did not intend to reset the lamp timer, this message confirms that
you have corrected your mistake by pressing any other key to continue.
INFO!
The lamp timer has not been changed

Page 33 USER GUIDELCD PROJECTOR32 13 TECHNICAL DATA
The technical data may change without prior notice in order to improve the
product performance.
The LCD projector is designed for indoor use and should not be operated
outside the general environmental limits, as this may lead to permanent
damage and violation of any warranties.
GENERAL ENVIRONMENTAL LIMITS:
STORAGE TEMPERATURE
-20 ~ 60° C (-4° ~ 140° F)STORAGE HUMIDITY10 ~ 90 percent relative humidity,
non condensingOPERATING TEMPERATURE
10° ~ 30° C (50° to...

Page 34 USER GUIDELCD PROJECTOR33 13.1.2 DISPLAY UNIT
SIZE322 x 245 x 638
12.7 x 9.6 x 25.1 inchWEIGHT12,5 kg
27,5 poundsPROJECTION LENS303 - 335 mm VARIOFOCUSANTI KEYSTONE8 degreesPROJECTION LAMP575 W Dual Ended Metal Halide
OSRAM 575W/GSLCD CELLActive matrix TFT stripe configurationCOLOR RESOLUTION16.7 millionRESPONSE TIME30 msCONTRAST RATIO100:1PIXEL RESOLUTION1024 x 768 x 3 (RGB)LCD DIAGONAL10 MOUSE COMPATIBILITYMicrosoft two key compatible serial (9 pin)
PS/2 compatible two key
Macintosh ADB compatible one...

Page 35 USER GUIDELCD PROJECTOR34 13.1.4 COMPATIBILITY
The unit is compatible with the following interfaces. Some sources are
predefined, but as different varieties of these exist (especially in
workstations), a frequency adjustment may be needed.
MODERESOLUTIONMAX VERTICAL
FREQUENCYGENERIC640x350
640x400
640x480
720x480
800x600
1024x768
1152x900
1280x102485 Hz
85 Hz
85 Hz
85 Hz
100 Hz
100 Hz
90 Hz
80 HzVGA, MCGA640 x 350
640 x 400
640 x 480
720 x 40085 Hz
85 Hz
85 Hz
85 HzSVGA800 x 600100 HzXGA1024 x 768100...

Page 36 USER GUIDELCD PROJECTOR35 14 CONNECTORS
The pinouts of all external connectors are described.
14.1.1 MOUSE
This connector is used for mouse control.8 PIN MINIDINFEMALE(FRONT VIEW)1234567812345PS/2 CLOCKRS232 TXDRS232 RTSRS232 RXDRS232 CTS678PS/2 DATAMAC ADBGND14.1.2 SOURCE 1/2/3
These connectors relay all sync and video signals from the computer to the
projector and back again to the optional local CRT monitor.12345ANALOG R INANALOG G INANALOG B INNOT USED678ANALOG R OUT110199182626 PIN HIGH DENSITY...

Page 37 USER GUIDELCD PROJECTOR36 15 FCC STATEMENT
This equipment has been certified to comply with the limits for a Class A
computing device, pursuant to Subpart J of Part 15 of FCC rules. Only
peripherals (computer input/output devices, terminals, printers, etc.)
certified to comply with the Class A limits may be attached to a computer
that complies with Class A limits. When connecting to a peripheral device,
a shielded input/output cable is required to ensure compliance with FCC
rules. The shielded cable that...

Page 38 USER GUIDELCD PROJECTOR37 16 ENVIRONMENTAL STATEMENT
This product is manufactured to minimize the stress and pollution of the
surroundings. Where possible, recyclable materials are used.
ITEMRECYCLING / HANDLINGPACKAGINGOnly recyclable materials are usedMECHANICSOnly recyclable plastics and metal are used.
Metal parts are painted aluminium and steel.ELECTRONICSNo CFC is used during manufacture. No
components that require special handling are
used.LCD MODULEThe liquid does not contain toxic or cancer...

Page 39 USER GUIDELCD PROJECTOR38 17 SERVICE INFORMATION
In cases where a problem cannot be solved by your dealer, please call the
number below to get assistance. Please have the part number, serial
number and the name of the dealer where you purchased the unit, ready
when you call.
Never return products directly to the manufacturer without first calling the
Service Department to obtain an RMA number (Return Material
Authorisation) as well as shipping instructions.
ASK AS, Headquarter :
+ 47 69340155 (Norway)...

Page 40 USER GUIDELCD PROJECTOR39 18 CONNECTION LAYOUT
The foldout shows how to connect the LCD projector to the different
computer sources.
1.BNC V-Split Cable
1A.BNC Cable - Monitor End
1B.BNC Cable - Computer End
2.VGA/XGA V-Split Cable
2A.VGA/XGA Cable - Monitor End
2B.VGA/XGA Cable - Computer End
3.Mouse Cable
4.Mouse Adapter
5.Mouse

View all the pages

Add page 41 to Favourites

All ASK manuals Comments (0)

Related Manuals for ASK Impression 960 User Guide

ASK Impression 750 User Guide
45 pages | ASK Projector
ASK C95, C105 Xga Multimedia Projectors Instructions
4 pages | ASK Projector
ASK M3 Microportable Multimedia Projector Specifications
4 pages | ASK Projector
ASK M3 Projector User Guide
32 pages | ASK Projector
ASK M2 Mobile Projector Specifications
4 pages | ASK Projector
ASK Impression A8+ Svga High Performance Projector Specifications
4 pages | ASK Projector
ASK Impression A10+ Specifications
4 pages | ASK Projector
ASK Impression 860 User Guide
46 pages | ASK Projector
ASK Impression 750 User Guide
45 pages | ASK Projector
ASK C95, C105 Xga Multimedia Projectors Instructions
4 pages | ASK Projector