ASK Impression 960 User Guide

USER GUIDELCD PROJECTOR10 4 MAIN FEATURES
The unit employs the following important features that in total provide you
with a highly functional and powerful projector :
-High brightness illumination system
-640x480 to 1280x1024 image resolution
-Built in RGB video interface
-3 x RGB input/output connectors
-16.7 million colors
-BatMouse™, remote control mouse
-On Screen Display (OSD)
-User settings memorized
-Low noise cooling system
-False-light blocking
-4m (13 ft.) cable with monitor V-split redrive 

USER GUIDELCD PROJECTOR11 5 SUPPLIED MATERIAL
A complete set includes the following components :1.LCD Projector6.Power Cord
2.VGA/XGA V-Split Cable7.BatMouse, Remote Control
3.BNC V-Split Cable8.Batteries
4.Mouse Cable9.User Guide
5.Mouse Adapter PC (Y-Split)
6 OPTIONAL MATERIAL
Optional cables and adapters are available for special computer sources
such as 13W3, MAC etc. Consult your dealer for further information. 

USER GUIDELCD PROJECTOR12 7 SETTING UP THE LCD PROJECTOR
Switch off all equipment before connecting the projector. Be aware of static
electricity that may build up, especially in the dry season and when
operating on synthetic carpets. Discharge any static electricity by touching
a metallic surface before you start.Do not cover the air inlet in front or the air outlet on top of the
projector housing, as this will block the cooling. Also make sure
to place the projector on a flat, hard surface to avoid...

USER GUIDELCD PROJECTOR13 7.1 COMPUTERSwitch off all equipment before you connect the LCD projector
to the computer, mouse and video source as outlined in the
following chapters. Then apply power first to the LCD projector,
then to the computer and video source for correct operation.Connect the LCD projector, computer and monitor as shown in the rear
foldout page (see Connection Layout).
The projector has three source input connectors. At power up, it will default
to project the signal from source 1. The...

USER GUIDELCD PROJECTOR14 your monitor and re-connect with the shortest lead of the V-split (1B).
Connect the longest lead of the V-split (1A) to the monitor BNC inputs.
7.1.4 ADAPTERS
If you have a computer that requires adapters to physically connect, insert
applicable adapter(s) onto the V-split of the PC compatible cable (2A,2B)
as described in the table on page 10.
APPLICABLE CABLES/ADAPTERS :
COMPUTERCABLE ADAPTERVGANoneMACII and PowerMacMAC (option)SUN13W3 (option)HPNone(1IBM RS6000
Power...

USER GUIDELCD PROJECTOR15 7.2 MOUSE
See the rear foldout when setting up.
Connect the mouse-cable to the LCD projector (3). Connect the
appropriate adapter (4) to the end of the mouse-cable, labelled “MA”. Then
connect the adapter to the appropriate computer mouse port.For the computer to recognise the mouse, connect all cables
and power on the projector before the computer is booted.A Y-split is provided with the PC and optional MAC adapters that enables
parallel use of the local computer mouse and the...

USER GUIDELCD PROJECTOR16 USING THE BATMOUSE:
STEPOPERATION1Control mouse pointer directly with the cursor keys2Press LEFT to activate (emulates the left mouse key)3Press DRAG to tag an object, move it using the cursor keys,
then press DRAG again (or wait 5 seconds) to release the
object (Drag-and-Drop).4Press RIGHT if your application requires emulation of the
right mouse key.The centre key of a three-key mouse is not supported.
If double-click does not work properly, try to adjust the double-click...

USER GUIDELCD PROJECTOR17 8 USING THE LCD PROJECTOR
The LCD projector has a set of connectors and controls that you need to
know in order to operate the device correctly.
8.1 OPTICS
The projection lens is mounted in the front of the projector. The optical
system is designed with a 8 degree keystone correction so that the
projected image is shifted upwards on the wall. This in effect enables the
placement of the projector on a flat table, still getting a rectangularly
projected image above the projector...

USER GUIDELCD PROJECTOR18 8.3 REMOTE CONTROL
The infrared BatMouseä remote control (RC) is the main user interface to
the projector. The RC is used to set the LCD projector correctly (to get the
best possible viewing conditions) and to control the presentation.
The figure shows the different keys on the remote control.Set-up should be performed once with the application(s) and computer you
are running most frequently. Allow some minutes for the equipment to
warm up before adjusting. Most settings will...

USER GUIDELCD PROJECTOR19 The MEM column in the tables below indicates whether the setting is
memorized for each source. For a detailed overview, see the Features
section.
BATMOUSE KEYS :
CONTROLFUNCTION“MEM”CONTRContrast (ratio between light and dark colors)YESBRIGHTBrightness (whiteness)YESTUNEAdjusts the stability of the imageYESON/OFFTurns the projected image on/off-RESETDefaults to standard settings-SOURCE 1Selects RGB input source 1 as activeNOSOURCE 2Selects RGB input source 2 as activeNOSOURCE...