ASK C200 Users Guide
Here you can view all the pages of manual ASK C200 Users Guide. The ASK manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
C200simply designed to be sharedUser’s Guide InFocus Corporation 27700B SW Parkway Avenue Wilsonville, Oregon 97070-9215 1-800-294-6400 •503-685-8888 Fax : 503-685-8887 http://www.infocus.com In Europe: InFocus International B.V. Strawinskylaan 585 1077 XX Amsterdam,The Netherlands Phone: +31 20 579 2000 Fax: +31 20 579 2999 In Asia : 238A Thomson Road #18-01/04 Novena Square Singapore 307684 Telephone: (65) 6334-9005 Fax : (65) 6333-4525 Printed on recycled paper. C200 C4050COVER.qxd 12/3/02...
Page 3
2 English Declaration of ConformityManufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070 USA European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands We declare under our sole responsibility that the C200 projector conforms to the fol- lowing directives and norms: EMC Directive 89/336/EEC, Amended by 93/68/EEC EMC: EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC Safety: EN 60950: 2000 July,...
Page 4
3 Table of Contents Introduction 5 Connecting a computer 7 Required computer connections 7 Optional computer connections 7 Displaying a computer image 9 First-time projector use with Windows 98 10 Adjusting the image 12 Connecting a video device 13 Displaying a video image 14 Shutting down the projector 16 Troubleshooting your setup 16 Using the keypad buttons 24 Using the remote control 25 Using the audio 26 Optimizing computer images 27 Presentation features 27 Optimizing video images...
Page 6
5 IntroductionYour new digital projector is easy to connect, easy to use, easy to maintain and has XGA 1024x768 resolution. The projector comes in a carry case that offers ample room for ASK acces- sory items such as the projector remote, color-coded cables, and documenta- tion. The color-coded cable straps and cables they contain make your setup experience quick and easy, while the case’s design helps you find and put away all items without the fear of anything becoming lost. Online...
Page 7
6 Projector components and features key pad speakers zoom focus elevator foot release remote control receivers (IR) air intake ventcarrying handle remote control receiver (IR) connectors leveling footheat vent heat vent remote control receiver (IR) computer 1computer 2video monitor out network serial control audio in audio in audio in audio out RR LL Y Pr Pbs-videocomputer in lock remote control receiver (IR) power connector network compu ter monitor s-videovideo connector component video...
Page 8
7 Connecting a computerRequired computer connectionsConnect the black end of the computer cable to the Computer 1 connector on the projector. Connect the blue end to the video port on your computer. If you are using a desktop computer, you first need to disconnect the monitor cable from the computer’s video port. Connect the black power cable to the connector on the back of the projector and to your electrical outlet. The Power LED on the projector’s keypad turns solid green. NOTE: Always use the...
Page 9
8 If you prefer connecting your computer to the projector with an optional VESA cable, connect one end of the cable to the VESA port on your com- puter, and connect the other end of the cable to the blue Computer 2 con- nector on the projector. You can control the projector from an LCD control panel or computer by connecting an RS-232 cable to the projector’s Serial connector. Specific RS-232 commands can be found in the Service and Support section of our website at www.ask.no. The projector can be...
Page 10
9 Displaying a computer image Remove the lens cap. Press the Pow e r button on the top of the projector or the remote. The LED flashes green and the fans start to run. When the lamp comes on, the startup screen is displayed and the LED is steady green. It can take a minute for the image to achieve full brightness. ? No startup screen? Get help on page 17. Turn on your computer. The computer’s image should appear on the projection screen. If it doesn’t, press the Computer button on the projector’s...