Armscor M1600r Instructions Manual
Here you can view all the pages of manual Armscor M1600r Instructions Manual. The Armscor manuals for Firearms are available online for free. You can easily download all the documents as PDF.
Page 1
ARMSCOR M16 R / M1600 R USER’S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM. DISCHARGING FIREARMS IN POOLY VENTILATED AREAS, CLEANING FIREARMS OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO LEAD AND OTHER SUSBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECT, REPRODUCTIVE HARM AND OTHER SERIOUS PHYSICAL INJURY. HAVE ADEQUATE VENTILATED AT ALL TIMES. WASH YOUR HANDS THOROUGHLY AFTER EXPOSURE....
Page 2
TO MAKE GUN SAFE: Safety lever is at the right side of the receiver and at the back of the bolt operating handle. Pull safety latch toward the “S” mark on the receiver. This locks trigger and gun cannot be fired. TO LOAD CHAMBER: With the safety on, insert a loaded magazine into the rifle. Pull the bolt operating handle all the way to the rear and release, allowing the bolt to move forward under full force of the operating springs. Bolt automatically picks up a cartridge from the magazine...
Page 3
1. Loosen receiver cap lock screw and unscrew receiver cap. Be careful, as spring inside are under pressure. 2. Pull out the unit assembly (recoil spring, recoil spring retainer and guide sleeve, firing pin spring, firing spring pin spring guide head and stem). Keep in order together with the receiver cap to avoid confusion in re-assembly. 3. With muzzle pointing upwards, fully retract bolt handle fully to the rear end of the receiver slot. 4. Push firing pin forward so as to align its tail end...
Page 4
8. Insert the entire unit inside the receiver, shorter sleeve resting against the bolt together with the receiver cap and compress the springs carefully to return the receiver cap into its original position. Tighten the receiver cap lock \ screw. 9. Pull bolt handle back and forth several times to check the action of the bolt and trigger assembly. B.TRIGGER ASSEMBLY 1. With gun in an upside down position, insert trigger spring follower into \ the trigger spring and mount it into the spring hole....
Page 5
Safety Position Thumb Operated Safety PART NAME PART NUMBER A) BARREL RECEIVER ASSEMBLY Barrel Receiver Cross Pin 1601 Barrel 1602 Ejector 1603 Muzzle Brake 1604 Muzzle Brake Set Screw 1605 Front Sight 1606 Front Sight Stud 1607 Front Sight Stud Lock Screw 1608 Front Sight Set Screw 1609 Rear Sight Carrying Handle 1610 Rear Sight...
Page 6
Extractor Spring 1626 Firing Pin 1627 Firing Pin Spring 1628 Firing Pin Spring Guide Head and Stem 1629 Firing Pin Spring Guide Head Insert 1629a Recoil Spring 1630 Recoil Spring Guide Sleeve 1631 Recoil Spring Retainer Sleeve 1632 C) TRIGGER HOUSING ASSEMBLY Magazine Catch 1633 Magazine Catch Button 1634 Magazine Catch Pivot Pin 1635 Magazine Catch Stop Pin...
Page 7
Rebound Lever Pivot Pin 1652 Rebound Lever Safety Pin 1653 Rebound Lever Spring 1654 Rebound Lever Spring Bearing 1655 Trigger Housing 1656 Trigger Housing Hold Down Screw (front) 1657 Trigger Housing Hold Down Screw Washer (front) 1657a Trigger Housing Hold Down Screw (rear) 1658 Trigger Housing Hold Down Screw Washer (rear) 1658a D) MAGAZINE BOX ASSEMBLY Magazine Box 1659 Magazine Box Inner...
Page 8
Grip 1677 Grip Screw 1678 Butt Stock 1679 Butt Stock Retainer Pin 1680 Butt Block Extension Rod (two pieces) 1681 Extension Rod Housing (two pieces) 1682 Extension Rod Housing Hold Down Screw (two pieces) 1683 Extension Rod Spring (two pieces) 1684 Extension Rod Spring Retaining Plug (two pieces) 1685 Extension Rod Stop Button (left) 1686 Extension Rod Stop Button Spring 1687...
All Armscor manuals