Apple Tv 3rd Gen Setup Manual

Chapter 1     Connect.11
Chapter 1      Connect.
Setting up Apple TVApple	TV	connects	to	your	 TV	through	an	HDMI	port	that	delivers	both	audio		
and	video. 	Before	you	set	up	Apple	 TV,	look	at	the	ports	on	the	back	of	your	 TV		
to	make	sure	you	have	the	right	cables:
	
ÂAn HDMI cable: 	 You	can	connect	Apple	 TV	to	an	HDTV	or	home	theater	receiver	
that	has	an	HDMI	port, 	using	an	HDMI	cable	for	both	video	and	audio.
	
ÂAn optical digital audio cable (optional): 	Use	this	cable	if	you	want	to	connect...

12Chapter 1      Connect.Chapter 1     Connect.
Step 1: Connecting the cables1  Connect	one	end	of	the	HDMI	cable	to	the	back	of	your	 TV.
2  Connect	the	other	end	of	the	cable	to	the	HDMI	port	on	the	back	of	Apple	 TV.
3  If	you’re	using	an	optical	digital	audio	cable	for	audio, 	connect	one	end	of	the	
cable	to	the	audio	input	port	on	your	receiver	or	 TV,	and	the	other	end	to	the	
optical	digital	audio	port	on	the	back	of	Apple	 TV.
Apple TV
Television
HDMI por t HDMI port
HDMI c\fble
Note:  The...

Chapter 1     Connect.13
Chapter 1      Connect.
Step 2: Connect the power cordConnect	one	end	of	the	power	cord	to	the	power	port	on	the	back	of	Apple	 TV	
and	the	other	end	to	a	power	outlet.
Po wer por t
Important:  Don’t	place	anything	on	top	of	Apple	 TV.	Objects	placed	on	top	may	
interfere	with	the	wireless	signal. 	Don’t	place	Apple	TV	on	top	of	other	electronic	
equipment	in	a	media	cabinet.
Step 3:  Turn on your TV and select the inputThe	first	time	you	use	Apple	 TV,	it	helps	you	choose	a...

www.apple.com/support/appletv
Configure.
2  

16Chapter 2      Configure.Chapter 2     Configure.
Apple	TV	helps	you	select	and	configure	your	wireless	network	connection, 	and	
connect	 to	iTunes	 on	your	 computer	 if	you	 want	 to	watch	 or	listen	 to	the	 contents	
of	your	iTunes	library.
Configuring your Apple TVHave	your	network	name	and	password	(if	you	use	one)	and	your	Apple	Remote	
handy	when	you	configure	Apple	 TV.	Make	sure	there	are	no	obstructions	
between	the	remote	and	Apple	 TV.	For	information	about	using	your	remote, 		
see...

Chapter 2     Configure.17
Chapter 2      Configure.
If	you	don’t	connect	using	DHCP, 	you	may	need	to	enter	your	IP	address, 	subnet	
mask, 	router	address, 	and	DNS	address. 	
To	complete	the	network	connection, 	follow	the	onscreen	instructions.
Connecting to iTunesTo	access	the	content	of	your	iTunes	library	on	Apple	 TV,	you	need	iTunes	10.5	or	
later	installed	on	your	computer. 	For	a	list	of	system	requirements, 	see	“Software	
and	accounts” 	on	page	10.
Updating your iTunes softwareYou	should...

18Chapter 2      Configure.
To set up Home Sharing in iTunes:
1  Open	iTunes	on	your	computer.
2  Choose	Advanced	>	 Turn	On	Home	Sharing.
3  Enter	your	Apple	ID	and	password, 	and	then	click	Create	Home	Share.
4  Repeat	steps	1	through	3	on	each	computer	you	want	to	use	for	Home	Sharing.
For	information	about	iTunes, 	open	iTunes	and	choose	Help	>	iTunes	Help.
To set up Home Sharing on Apple TV:
1  On	Apple	 TV,	choose	Settings	>	Computers.
2  Choose	 Turn	On	Home	Sharing, 	and	then	enter	the	same	Apple...

www.apple.com/support/appletv
Watch.
3  

20Chapter 3      Watch.Chapter 3     Watch.
Read	on	to	learn	about	using	your	Apple	Remote	with	Apple	 TV.
Using your Apple remoteUse	the	Apple	Remote	to	control	Apple	TV	settings	and	navigate	your	content.	
Make	sure	there	are	no	obstructions	between	the	remote	and	Apple	 TV.
MENU
Up
Down
Play/Pause
Menu Left R\fght
Sele\bt