Apple macbook pro 17 inch mid 2009 User Manual
Here you can view all the pages of manual Apple macbook pro 17 inch mid 2009 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 141
MacBook Pro (17-inch, Early 2009) Take Apart — Bluetooth Card and Holder 141 2010-06-11 Replacement 1 Remove any adhesive residue left on optical drive from Bluetooth holder. 2 Assemble Bluetooth card and bracket in holder. 3 Install Bluetooth holder on optical drive so that • screw holes align • holder aligns with cushion on optical drive
Page 142
MacBook Pro (17-inch, Early 2009) Take Apart — Camera Cable Guide 142 2010-06-11 First Steps Remove: • Bottom case Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Camera Cable Guide
Page 143
MacBook Pro (17-inch, Early 2009) Take Apart — Camera Cable Guide 143 2010-06-11 Tools Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal 1 Remove 2 (8-mm) 922-8645 screws. Replacement Note: Be sure to anchor the ground tab when reinstalling the screw closest to the display clutch cover. 2 Remove the camera cable guide.
Page 144
MacBook Pro (17-inch, Early 2009) Take Apart — LVDS Cable Guide 144 2010-06-11 First Steps Remove: • Bottom case Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. LVDS Cable Guide
Page 145
MacBook Pro (17-inch, Early 2009) Take Apart — LVDS Cable Guide 145 2010-06-11 Tools Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal 1 Locate LVDS cable. 2 To disconnect LVDS cable, grasp black tab and gently swing LVDS lock bar up and back to unlock the cable. 3 Slide cable out of connector by pulling the cable. Do not pull the black tab or lock bar.
Page 146
MacBook Pro (17-inch, Early 2009) Take Apart — LVDS Cable Guide 146 2010-06-11 4 Remove 2 (8-mm) 922-8645 screws. Replacement Note: Be sure to anchor the ground tab when reinstalling the screw closest to the display clutch cover. 5 Remove the LVDS cable guide.
Page 147
MacBook Pro (17-inch, Early 2009) Take Apart — Fans 147 2010-06-11 First Steps Remove: • Bottom case Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Fans
Page 148
MacBook Pro (17-inch, Early 2009) Take Apart — Fans 148 2010-06-11 Tools Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal 1 Disconnect each fan cable. 2 Remove 6 (3.1-mm) 922-8754 screws. 3 Remove fan(s) from top case. Replacement Note: To identify the fans for ordering parts, • Right Fan is closest to optical drive • Left Fan is closest to MagSafe power connector
Page 149
MacBook Pro (17-inch, Early 2009) Take Apart — Optical Drive 149 2010-06-11 First Steps Remove: • Bottom case Caution: The optical drive is very fragile. Handle by the sides only. Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Optical Drive
Page 150
MacBook Pro (17-inch, Early 2009) Take Apart — Optical Drive 150 2010-06-11 Tools Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Torx T6 screwdriver Removal 1 With a black stick, carefully pry optical cable straight up and off logic board. Important Replacement Note: Install flex cable vertically onto logic board connector. If not, logic board pins could bend, causing an undetected disc symptom. 2 Remove 4 screws: • 1 Torx T6 (3.1-mm) 922-xxxx...