Apple macbook pro 17 inch early 2009 User Manual
Here you can view all the pages of manual Apple macbook pro 17 inch early 2009 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 151
MacBook Pro (17-inch, Early 2009) Take Apart — Optical Drive 151 2010-06-11 Replacement Caution: When connecting the camera cable, make sure it is fully connected; then place the shim behind the cable to secure it. Replacement Caution: To avoid a short to the logic board, be sure to place EMI gasket on camera cable— positioned precisely where shown—after cable is fully connected to logic board and shim is in place. 4 Tilt up optical drive. Replacement Note: If reusing optical drive, do...
Page 152
MacBook Pro (17-inch, Early 2009) Take Apart — Optical Drive 152 2010-06-11 5 Caution: The optical drive is very fragile. Handle by the sides only!
Page 153
MacBook Pro (17-inch, Early 2009) Take Apart — Optical Drive Flex Cable 153 2010-06-11 First Steps Remove: • Bottom case • Optical drive Caution: The optical drive is very fragile. Handle by the sides only. Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Optical Drive Flex Cable
Page 154
MacBook Pro (17-inch, Early 2009) Take Apart — Optical Drive Flex Cable 154 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick Removal 1 Handle optical drive by sides only. 2 With a black stick or fingernail, carefully wiggle flex cable off optical drive.
Page 155
MacBook Pro (17-inch, Early 2009) Take Apart — Hard Drive Connector Cable 155 2010-06-11 First Steps Remove: • Bottom case • Hard drive bracket • Hard drive Caution: Make sure data is backed up before removing the hard drive. Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Hard Drive Connector Cable
Page 156
MacBook Pro (17-inch, Early 2009) Take Apart — Hard Drive Connector Cable 156 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal 1 Remove 4 screws: • 2 (1.8-mm) 922-8983 at shield • 2 (2.2-mm) 922-8329 at cable 2 Remove shield. 3 Use black stick to disconnect cable and carefully pry cable up from adhesive.
Page 157
MacBook Pro (17-inch, Early 2009) Take Apart — Battery Indicator Light (BIL) Cable and Board 157 2010-06-11 First Steps Remove: • Bottom case • Hard drive bracket • Hard drive Caution: Make sure data is backed up before removing the hard drive. Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Battery Indicator Light (BIL) Cable and Board
Page 158
MacBook Pro (17-inch, Early 2009) Take Apart — Battery Indicator Light (BIL) Cable and Board 158 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick • Piece of tape Removal 1 Remove 2 (1.8-mm) 922-8983 screws from the shield. 2 Remove shield. 3 Place tape over BIL button on outside of top case. 4 Remove 2 (2-mm) 922-xxxx screws from BIL board.
Page 159
MacBook Pro (17-inch, Early 2009) Take Apart — Battery Indicator Light (BIL) Cable and Board 159 2010-06-11 5 Flip over board. 6 Lift lever to disconnect cable from BIL board and from logic board. Note: The tape will prevent the BIL button from falling out of top case. Replacement Note: Before replacing the BIL board, check that: • the long rubber gasket is assembled on top of the LED row • the BIL button is installed in the top case
Page 160
MacBook Pro (17-inch, Early 2009) Take Apart — Hard Drive Bracket, Front 160 2010-06-11 First Steps Remove: • Bottom case • Hard drive bracket • Hard drive Caution: Make sure data is backed up before removing the hard drive. Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Hard Drive Bracket, Front