Apple ibook g4 12 inch late 2004 User Manual
Have a look at the manual Apple ibook g4 12 inch late 2004 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
iBook G4 (12-inch Late 2004) Take Apart - 80 Hard Drive8. Warning: Handle the hard drive at the sides only. Do not touch or press anywhere else on the drive. Warning: If the ribbon cable connector is pulled out unevenly, some connector pins could become bent and damaged. Using even force, pull the looped handle to disconnect the ribbon cable from the connector on the end of the hard drive. 9. Remove the four black Torx T8 screws from the ends of the hard drive, and transfer the screws to the replacement drive. 10. Install the replacement hard drive, and reassemble and test the computer.
81 - iBook G4 (12-inch Late 2004) Take Apart Modem Modem Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • AirPort Extreme Card • Memory card • Bottom case • Bottom shield • DC-in board • Top case • Top shield
iBook G4 (12-inch Late 2004) Take Apart - 82 Modem Procedure 1.Warning: When removing the modem, be careful not to strain the modem cable or shield. Do not apply pressure to the modem. Read all of the procedure before removing and replacing the modem. 2. Remove the two screws from the modem board.
83 - iBook G4 (12-inch Late 2004) Take Apart Modem 3. Carefully grasping the ends of the modem board and shield, lift them straight up to disconnect them from the logic board. Replacement Note: Before installing the replacement modem, make sure no cables are blocking the modem connector on the logic board.
iBook G4 (12-inch Late 2004) Take Apart - 84 Modem4. Disconnect the cable from the upper end of the modem board. 5. Install the replacement modem, and reassemble and test the computer. Replacement Caution: Handle the modem by the edges only. When securing the modem to the logic board, press only on the rectangular area directly over the modem connector.
85 - iBook G4 (12-inch Late 2004) Take Apart Bluetooth Bluetooth Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • AirPort Extreme Card • Memory card • Bottom case • Bottom shield
iBook G4 (12-inch Late 2004) Take Apart - 86 Bluetooth• DC-in board • Top case • Top shield Procedure 1. With the computer on a soft cloth, disconnect the cable from the Bluetooth board and the logic board. 2. Disconnect the antenna cable from the Bluetooth board. 3. Remove the screw from the Bluetooth board.
87 - iBook G4 (12-inch Late 2004) Take Apart Bluetooth 4. Without putting pressure on the optical drive, support the antenna board holder in place as you slide out the antenna board. 5.Note: If the antenna board holder is attached securely, you do not need to replace it when installing a replacement Bluetooth antenna board. However, if you are replacing the optical drive with a new drive, remove the antenna board holder and install a new one on the replacement optical drive. The antenna board holder adheres to the optical drive with an adhesive backing.
iBook G4 (12-inch Late 2004) Take Apart - 88 Bluetooth6. Install the replacement Bluetooth board and antenna, and reassemble and test the computer.
89 - iBook G4 (12-inch Late 2004) Take Apart Optical Drive Optical Drive Note: Depending on the configuration of a customer’s computer, the optical drive can be either a CD-ROM drive or a combination CD-RW/DVD-ROM drive. The replacement instructions are the same whichever optical drive is installed. Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray). Part Location