AOR ARD9800 Receiver Instruction Manual
Have a look at the manual AOR ARD9800 Receiver Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 212 AOR manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 24
23
Control Commands
Interfacing to a PC
Using the supplied PC interface cable, connect between the COM connector at the rear panel (marked
as [10101] ) to the serial port of a PC.
NOTE: Be sure your PC’s serial port is active. Check for correct hardware and software settings!
Below are the pin assignments of the COM connector of the ARD9800.
ARD9800 COM connector Serial connector of a PC (D-Sub 9 – pin)
Pin #...](http://img.usermanuals.tech/thumb/5671/81808/w64_aor_ard-9800-digital-voice-fast-radio-modem_manual-1_d-23.png "Page 24
23
Control Commands
Interfacing to a PC
Using the supplied PC interface cable, connect between the COM connector at the rear panel (marked
as [10101] ) to the serial port of a PC.
NOTE: Be sure your PC’s serial port is active. Check for correct hardware and software settings!
Below are the pin assignments of the COM connector of the ARD9800.
ARD9800 COM connector Serial connector of a PC (D-Sub 9 – pin)
Pin #...")
![Page 25
24
Command Format
Run a terminal software program, and then turn the power of the ARD9800 on.
The following message should appear on the PC screen:
cmd>
This indicates the ARD9800 is ready to accept commands from the PC.
Each command consists of three (3) alphabetical characters.
cmd>CCC_NN [CR]
CCC: Command (Must be a capital letter)
_: Space
NN: Parameter
[CR]: Carriage Return
Entering a command without a parameter will display the current parameter...](http://img.usermanuals.tech/thumb/5671/81808/w64_aor_ard-9800-digital-voice-fast-radio-modem_manual-1_d-24.png "Page 25
24
Command Format
Run a terminal software program, and then turn the power of the ARD9800 on.
The following message should appear on the PC screen:
cmd>
This indicates the ARD9800 is ready to accept commands from the PC.
Each command consists of three (3) alphabetical characters.
cmd>CCC_NN [CR]
CCC: Command (Must be a capital letter)
_: Space
NN: Parameter
[CR]: Carriage Return
Entering a command without a parameter will display the current parameter...")
![Page 27
26
Command details
AAQ
Function Send VIDEO In signal to the VIDEO OUT (to the monitor screen) Capture image
into memory of the ARD9800
Default None
Format AAQ {0 / 1} [CR]
Parameter 1: Send VIDEO In signal to a VIDEO OUT (to the monitor screen) 0: Capture
image into memory of the ARD9800
Details W hile AVT command is OFF, [AAQ 0] will be accepted.
Entering AAQ[CR] will respond with the current status.
AAQ ON --- Video signal is passed to the VIDEO OUT port
AAQ OFF ----...](http://img.usermanuals.tech/thumb/5671/81808/w64_aor_ard-9800-digital-voice-fast-radio-modem_manual-1_d-26.png "Page 27
26
Command details
AAQ
Function Send VIDEO In signal to the VIDEO OUT (to the monitor screen) Capture image
into memory of the ARD9800
Default None
Format AAQ {0 / 1} [CR]
Parameter 1: Send VIDEO In signal to a VIDEO OUT (to the monitor screen) 0: Capture
image into memory of the ARD9800
Details W hile AVT command is OFF, [AAQ 0] will be accepted.
Entering AAQ[CR] will respond with the current status.
AAQ ON --- Video signal is passed to the VIDEO OUT port
AAQ OFF ----...")
![Page 28
27
ADC
Function List the current commands
Default None
Format ADC [CR]
Parameter None
Details Lists the current commands
Example ADC [CR]
ADS
Function Display current settings
Default Headerlen : 1.00
AFC = ON
Analog : ON
Format ADS [CR]
Parameter None
Details Displays the current parameter settings
Example ADS [CR]
AFC
Function Activate AFC (Automatic Frequency control) function
Default On
Format AFC {ON/OFF} [CR]
Parameter ON: Activates the AFC function
OFF:...](http://img.usermanuals.tech/thumb/5671/81808/w64_aor_ard-9800-digital-voice-fast-radio-modem_manual-1_d-27.png "Page 28
27
ADC
Function List the current commands
Default None
Format ADC [CR]
Parameter None
Details Lists the current commands
Example ADC [CR]
ADS
Function Display current settings
Default Headerlen : 1.00
AFC = ON
Analog : ON
Format ADS [CR]
Parameter None
Details Displays the current parameter settings
Example ADS [CR]
AFC
Function Activate AFC (Automatic Frequency control) function
Default On
Format AFC {ON/OFF} [CR]
Parameter ON: Activates the AFC function
OFF:...")
![Page 29
28
AHL
Function Set the duration of the synchronization header
Default 100 (1 second)
Format AHL {050 – 198} [CR]
Parameter 050 – 198 (0.02 incremental)
Details Sets the duration of the synchronization header
{100} represents 1.00 second .
Example AFC_146 [CR]](http://img.usermanuals.tech/thumb/5671/81808/w64_aor_ard-9800-digital-voice-fast-radio-modem_manual-1_d-28.png "Page 29
28
AHL
Function Set the duration of the synchronization header
Default 100 (1 second)
Format AHL {050 – 198} [CR]
Parameter 050 – 198 (0.02 incremental)
Details Sets the duration of the synchronization header
{100} represents 1.00 second .
Example AFC_146 [CR]")
![Page 30
29
AT T
Function Selects the output level to the radio equipment
Default ON
Format ATT_ {ON/OFF} [CR]
Parameter ON : Lower level
OFF : Higher level
Details Selects the output level to the radio equipment Refer to Level Adjustment at page XX for details
Example ATT_ON [CR]
AT X
Function Send digital image
Default None
Format ATX [CR]
Parameter None
Details An image must be captured and stored into memory before it can be sent.
Note: Optional memory module MUST be...](http://img.usermanuals.tech/thumb/5671/81808/w64_aor_ard-9800-digital-voice-fast-radio-modem_manual-1_d-29.png "Page 30
29
AT T
Function Selects the output level to the radio equipment
Default ON
Format ATT_ {ON/OFF} [CR]
Parameter ON : Lower level
OFF : Higher level
Details Selects the output level to the radio equipment Refer to Level Adjustment at page XX for details
Example ATT_ON [CR]
AT X
Function Send digital image
Default None
Format ATX [CR]
Parameter None
Details An image must be captured and stored into memory before it can be sent.
Note: Optional memory module MUST be...")
![Page 31
30
AV R
Function Display the current firmware version
Default None
Format AVR [CR]
Parameter None
Details Displays the current firmware version
Example AVR [CR]](http://img.usermanuals.tech/thumb/5671/81808/w64_aor_ard-9800-digital-voice-fast-radio-modem_manual-1_d-30.png "Page 31
30
AV R
Function Display the current firmware version
Default None
Format AVR [CR]
Parameter None
Details Displays the current firmware version
Example AVR [CR]")
30 AV R Function Display the current firmware version Default None Format AVR [CR] Parameter None Details Displays the current firmware version Example AVR [CR]
31 LIMITED W ARRANTY AOR USA, Inc. (AOR) warrants its products as described below: AOR will repair or exchange equipment as a result of defects in parts or workmanship for a period of one year from the date of original retail purchase from an authorized AOR dealer. Exclusions The following items are not covered by the AOR limited warranty: 1. Products that are damaged through accident, abuse, misuse, neglect, or user modifications. 2. Problems that arise through failure to follow directions in the owner’s manual. 3. Exposure of the product to adverse or severe weather conditions, including temperature extremes or water, including rainfall or immersion. 4. Exposure to toxic materials, biohazards, radioactive materials or other contamination. 5. Repairs attempted by parties other than AOR or its authorized personnel. 6. Damage that results from improper installation, including improper voltage and/or reversed polarity, or exposure of a receiver to signal levels exceeding specifications. 7. Damage resulting through the use of accessories from manufacturers other than AOR. 8. Equipment that has had serial numbers removed or altered in any way. 9. Damage that occurred as a result of shipment. Claims must be presented to the carrier. 10. AOR is not responsible for any costs arising from installation or reinstallation of the equipment, nor for any consequential (such as loss of use) damage claims. Obtaining W arranty Service 1. You are responsible for shipping the product to AOR and any related costs. 2. Warranty claim must be accompanied by a legible copy of the original product purchase receipt. 3. You must include a description of the problem(s) encountered with the product. 4. You must include your name, a valid ground shipping address (including zip code) and telephone contact information. 5. AOR will ship the repaired (or replaced) product by ground transport.
32 Limitations Any and all implied warranties, including those pertaining to merchantability and utility for a specific purpose are limited to the duration of this limited warranty. AOR’s limits on warranty pertain only to the repair or, at its option, replacement of defective products. AOR shall not be liable for any other damages, including consequential, incidental or otherwise, arising from any defect. Some states do not allow limitations on how long an implied warranty lasts and may not allow the exclusion of incidental or consequential damages. As such, the above limitations may not apply in every case. This warranty gives you specific legal rights and you may have other rights that apply in your state. If you have questions about this limited warranty, or the operation of your AOR product, contact AOR at (310) 787-8615 during normal business hours (9 am ~ 5 pm Pacific Time Zone), or write to AOR, 20655 S. Western Ave., Suite 112, Torrance, CA 90501. You may also send a fax to AOR at (310) 787-8619. Additional information is available at the AOR web site: www.aorusa.com We suggest attaching your purchase receipt to this half of the warranty information sheet and that you keep this information in a secure location. AOR Model Number __________________________ Serial Number ________________________________ Dealer Name _________________________________ Purchase Date ________________________________
33 AOR, LTD. 2-6-4, Misuji, Taitok-Ku Tokyo, 111-0055, Japan http://www.aorja.com AOR USA, INC. 20655 S. Western Ave. Suite 112 Torrance, CA 90501, U.S.A. Phone: 310-787-8615 Fax: 310-787-8619 http://www.aorusa.com [email protected] Copyright © 2003 All rights reserved Rev. 1. 2