AOR AR3030 Receiver Instructions
View the AOR AR3030 Receiver Instructions for free. All the AOR manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 1
The sequence is keyed through the AR3030 numeric keypad:
[4] [8] [0] [0] [ENT] for 4800 bps operation
or
[9] [6] [0] [0] [ENT] for 9600 bps operation
To restore normal local operation to the AR3030 either key in the
sequence Q [CR] via the RS232 or switch the AR3030 Off, wait for 5
seconds then switch On again.
AOR (UK) LTD
[3030-NTE revision 5]
!
AR3030 General Coverage Receiver addendum
Please note the following points regarding
the AR3030 receiver:
1. Microprocessor reset.
There is a ‘small’ chance...](http://img.usermanuals.tech/thumb/5671/81678/w300_aor_ar3030-hf-comms-reciever_manual-addendum-1_d-0.png "Page 1
The sequence is keyed through the AR3030 numeric keypad:
[4] [8] [0] [0] [ENT] for 4800 bps operation
or
[9] [6] [0] [0] [ENT] for 9600 bps operation
To restore normal local operation to the AR3030 either key in the
sequence Q [CR] via the RS232 or switch the AR3030 Off, wait for 5
seconds then switch On again.
AOR (UK) LTD
[3030-NTE revision 5]
!
AR3030 General Coverage Receiver addendum
Please note the following points regarding
the AR3030 receiver:
1. Microprocessor reset.
There is a ‘small’ chance...")
![Page 2
Should the Collins SSB filter be fitted and the receivers
microprocessor reset you must hold the [3] key while resetting via the
bottom case reset switch. This action alters the carrier re-insertion
point to optimise the SSB filters characteristics.
To “fully optimise” the Collins SSB filter performance, the carrier
crystals may be replaced at a small additional charge.
3. BFO in CW mode.
The BFO is permanently engaged in the CW mode (page 29 section
6-10).
4. Collins filter identifying numbers.
Two...](http://img.usermanuals.tech/thumb/5671/81678/w300_aor_ar3030-hf-comms-reciever_manual-addendum-1_d-1.png "Page 2
Should the Collins SSB filter be fitted and the receivers
microprocessor reset you must hold the [3] key while resetting via the
bottom case reset switch. This action alters the carrier re-insertion
point to optimise the SSB filters characteristics.
To “fully optimise” the Collins SSB filter performance, the carrier
crystals may be replaced at a small additional charge.
3. BFO in CW mode.
The BFO is permanently engaged in the CW mode (page 29 section
6-10).
4. Collins filter identifying numbers.
Two...")
View the AOR AR3030 Receiver Instructions for free. All the AOR manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.