AOC E2795vh User Manual

							 31
 
OSD Setup      
H.Position   0-100   Adjust the horizontal position of 
OSD 
V.Position   0-100  
Adjust the vertical position of OSD 
Timeout    5-120  Adjust the OSD Timeout   
Transparence  0-100  Adjust the transparence of OSD 
 
Language     Select the OSD language   
 
						

							 32
Extra 
 
 
 
Press   (Menu) to display menu. 
Press  - or +  to select   (OSD 
Setup)
, and press to enter. 
Press  - or  +  to select submenu, press 
to enter, and press -  or + to 
adjust. 
Press  to exit. 
 
						

							 33 
 
Input Select 
Auto 
Select to Auto Detect input signal 
Analog  Select Analog Signal Source as Input 
DVI Select DVI
 Source as Input
 
Auto Config    yes or no    Auto adjust the picture to default   
Image Ratio  wide or 4:3 Select wide or 4:3 format for display   
DDC-CI  yes or no  Turn ON/OFF DDC-CI Support 
Off Timer 0~24hours  Select timing to turn off the monitor. 
Information  
  Show t he infor mation of the main ima ge a nd 
sub-image source   
HDMI 
Select HDMI
 Source as Input
 
 
						

							 34
Reset 
 
 
 
Press - or +  to select YES or NO. 
Press   (Menu) to display menu. 
Press - or +  to select  (Reset), 
and press
 to enter. 
Press  to exit. 
 
						

							 35
 
 
Reset    yes or no  Reset the menu to default   
 
 
						

							 36
Exit 
 
 
 
 
 
  Exit      Exit the main OSD   
Press   (Menu) to display menu. 
Press 
- or + to select  (Exit); 
and press 
 to exit . 
 
						

							 37
LED Indicator 
 Status  LED Color 
 Full Power Mode 
 
   
   
Active-off Mode 
 
 
 
  
 
 
     
 
 
 
 
 
 
   
 
 
 
 
Amber 
 Blue   
 
						

							 38
Driver 
Monitor Driver 
 
Windows 7 
1.Start Windows® 7 
 
2.Click on the 'Start' button and then click on  'Control Panel'. 
 
 
3. Click on the  'Display' icon. 
 
 
 
						

							 39
4.Ckick on the “Change display settings” 
button.
  
 
 
5.Click the  “Advanced Settings” button.  
 
 
6.
Click the  “Monitor”  tab and then click the  “Properties” button. 
 
 
 
						

							 40
7.Click the
 “Driver” tab.   
 
8. Open the Update Driver Software-Generic PnP Monitor window by clicking on  “Update Driver... “and then 
click the  "Browse my computer for driver software"  button.  
 
 
9. Select  "Let me pick from a list of  device drivers on my computer" .