AOC E2795vh User Manual

 11
Adjusting Viewing Angle 
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitors angle to your 
own preference.   
Hold the stand so you will not topple the moni tor when you change the monitors angle.   
You are able to adjust the monitors angle from -4° to 18 °.   
 
 
NOTE: 
Do not touch the LCD screen when you change the a ngle. It may cause damage or break the LCD screen.
 

 12
Connecting the Monitor 
Cable Connections On Back of Monitor and Computer:  
 
 
  1. Power   
3. Analog (DB-15 VGA cable)  
   
4 .DVI  
   
 
 1      Connect the power cable to the AC  port on the back of the monitor. 
 3      Connect one end of the 15-pin D-Sub cable to the back of the monitor and conn ect the other end to the 
computer's D-Sub port.     4      (Optional – Requires a video card with DVI port) - Connect one end of the DVI cable to the back of the monitor 
  8   Turn on your...

 13
Wall Mounting 
Preparing to Install An Optional Wall Mounting Arm.    
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this 
procedure. Follow these steps: 
 
1      Remove the base and stand.   
2   Follow the manufacturers instructi ons to assemble the wall mounting arm.   
3      Place the wall mounting arm onto t he back of the monitor. Line up the holes of the arm with the holes in the 
back of the monitor.   
4      Insert the 4 screws into...

 14
Adjusting 
Setting Optimal Resolution 
Windows Vista   
For Windows Vista: 
1 Click START.  
2 Click CONTROL PANEL. 
 
 
3 Click  Appearance and Personalization.  
 
 
4 Click Personalization   
 
 
 

 15
5 Click Display Settings. 
 
 
 
6 Set the resolution  SLIDE-BAR to 1920 by  1080.   
 
 

 16
Windows XP   
For Windows XP: 
1 Click START.   
 
 
2 Click SETTINGS. 
 
3 Click CONTROL PANEL.   
 
4 Click  Appearance and Themes.  
 
 
5 Double click  DISPLAY.  
 
 
 

 17
6 Click SETTINGS. 
 
7 Set the resolution 
SLIDE-BAR to 1920 by  1080.   
 
 
 
Windows ME/2000 
For Windows ME/2000: 
1 Click START.   
2 Click SETTINGS.   
3 Click CONTROL PANEL.   
4 Double click  DISPLAY.  
5 Click SETTINGS.   
6 Set the resolution  SLIDE-BAR to 1920 by 1080.
 

 18
Hotkeys 
 
 
 
Power  
Press the Power button to turn 0n/off the monitor. 
 
Volume/-
When there is no OSD.press Volume - to active volume adjustment bar.press  - or + to adjust volume.   
4:3 or wide image ratio / +  
When there is no OSD, press  hotkey continuously to change 4:3 or wide im\
age ratio. (If the product screen size is 
4:3 or input signal resolution is wide format, the hot key is disable to\
 adjust. ).
  Auto/Source/Exit
       Volume/-         
 
Menu/Enter      
Po
 wer
Auto / Exit...

 19
OSD Setting 
 
Basic and simple instruction on the control keys. 
  
 
 
1) Press the  MENU-button  to activate the OSD window.   
2) Press  - or + to navigate through the functions. Once t he desired function is highlighted, press the  MENU-button 
to activate sub-menu . Once the des ired function is highlighted, press MENU-button to activate it.   
3) Press - or +  to change the settings of the selected function. Press - or +  to select another function in sub-menu . 
Press  AUTO to exit . If you...

Luminance 
 Press Menu to display MENU Press   (Menu) to display menu. 
Press  or  to select  
(Luminance)
, and press to enter. 
Press   or  to select submenu, press 
to enter, and press   or  to 
adjust. 
Press  to exit. 
20
- +
- +
-+