AOC E2450swda User Manual

 41 
4. Click Properties in the Monitor tab. If the Properties button is deactivated, it means the configuration for your 
monitor is completed. The monitor can be used as is. 
If the message Windows needs... is displayed, as shown in the figure below, click Continue. 
   
 
5. Click Update Driver... in the Driver tab.  
   
 
6. Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers 
on my computer. 
 
 
7. Click on the Have disk... button, then...

 42 
Windows XP 
 
1. Start Windows® XP  
2. Click on the Start button and then click on Control Panel.  
 
 
3. Select and click on the category „Appearance and Themes‟ 
 
 
4. Click on the Display Item.  
 
    
 

 43 
5. Select the Settings tab then click on the Advanced button.  
 
 
6. Select Monitor tab 
- If the Properties button is inactive, it means your monitor is properly configured. Please stop installation. 
- If the Properties button is active, click on Properties button. 
Please follow the steps below.  
 
 
7. Click on the Driver tab and then click on Update Driver... button.  
 
   
 

 44 
8. Select the Install from a list or specific location [advanced] radio button and then click on the Next button.  
 
 
9. Select the Dont Search. I will choose the driver to install radio button. Then click on the Next button.  
 
 
10. Click on the Have disk... button, then click on the Browse... button and then select the appropriate drive F: 
(CD-ROM Drive).  
 
11. Click on the Open button, then click the OK button.  
12. Select your monitor model and click on the Next button. 
- If you can see...

 45 
Windows 2000 
 
1. Start Windows® 2000  
2. Click on the Start button, point to Settings, and then click on Control Panel.  
3. Double click on the Display Icon.  
4. Select the Settings tab then click on Advanced....  
5. Select Monitor  
- If the Properties button is inactive, it means your monitor is properly configured. Please stop installation.  
- If the Properties button is active. Click on Properties button. Please follow the steps given below.  
6. Click on Driver and then click on Update...

 46 
i-Menu 
 
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on 
screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation 
guide.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 47 
e-Saver 
 
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown 
functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or 
Screen Saver); the actual shutdown time depends on your preferences (see example below). 
Please click on driver/e-Saver/setup.exe to start installing the e-Saver software, follow the install wizard to 
complete software installation. 
 
Under each of the four PC status,...

 48 
 Screen+ 
 
 
Welcome to Screen+ software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop 
into different panes, each pane displays a different window. You only need to drag the window to a corresponding 
pane, when you want to access it. It supports multiple monitor display to make your task easier. Please follow the 
installation software to install it. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 49 
Troubleshoot 
 
Problem & Question 
 
Possible Solutions 
 
 
Power LED Is Not ON 
 
Make sure the power button is ON and the Power Cord is properly connected 
to a grounded power outlet and to the monitor.  
 
 
 
 
 
 
 
 
 
 
No images on the screen 
 
Is the power cord connected properly? 
Check the power cord connection and power supply. 
Is the cable connected correctly? 
(Connected using the D-sub cable) 
Check the DB-15 cable connection.   
(Connected using the DVI cable) 
Check the DVI...

 50 
 
 
 
 
Monitor Is Stuck In Active 
Off-Mode 
 
The Computer Power Switch should be in the ON position.  
The Computer Video Card should be snugly fitted in its slot.  
Make sure the monitors video cable is properly connected to the computer.  
Inspect the monitors video cable and make sure no pin is bent.  
Make sure your computer is operational by hitting the CAPS LOCK key on 
the keyboard while observing the CAPS LOCK LED. The LED should either 
turn ON or OFF after hitting the CAPS LOCK key....