AOC E2343fs User Manual

 31
 
OSD Setup      
H.Position   0-100   Adjust the horizontal position of 
OSD 
V.Position   0-100   Adjust t
he vertical position of OSD 
Timeout    5-120  Adjust the OSD Timeout   
Transparence  0-100  Adjust the transparence of OSD 
 
Language     Select the OSD language   
 

 32
Extra 
 
 
 
Press   (Menu) to display menu. 
Press  or  to select   (OSD 
Setup), and press to enter. 
Press  or   to select submenu, press 
to enter, and press  or  to 
adjust. 
Press  to exit. 
 

 33
 
 Input Select 
Auto 
Select to Auto Detect input signal 
Analog  Select Analog Signal Source as Input 
DVI Select   Signal Source as Input 
Auto Config    yes or no    Auto adjust the picture to default   
Image Ratio  wide or 4:3 Select wide or 4:3 format for display   
DDC-CI  yes or no  Turn ON/OFF DDC-CI Support 
Off Timer 0~24hours  Select timing to turn off the monitor. 
Information  
  Show t he infor mation of the main ima ge a nd 
sub-image source   
DVI 
 

 34
Reset 
 
 
 
Press or   to select YES or NO. 
Press   (Menu) to display menu. 
Press  or  to select  (Reset), 
and press
 to enter. 
Press  to exit. 
 

 35
 
 
Reset    yes or no  Reset the menu to default   
 
 

 36
Exit 
 
 
 
 
 
  Exit      Exit the main OSD   
Press   (Menu) to display menu. 
Press  or  to select  (Exit); 
and press 
 to exit . 
 

 37
LED Indicator 
 
Status 
 
LED Color 
 
 
 
 
 
 
Full Power Mode 
 
 
 
 
 
White    
 
 
 
 
 
 
 
 
 
 
 
Active-off Mode 
 
 
 
 
 
 red   
 
 
 
 
 
 

 38
Driver 
Monitor Driver 
 
Windows 7 
1.Start Windows® 7 
 
2.Click on the Start button and then click on  Control Panel. 
 
 
3. Click on the  Display icon. 
 
 
 

 39
4.Ckick on the
 “Change display settings”  button.
  
 
 
5.Click the  “Advanced Settings” button.  
 
 
6.
Click the  “Monitor”  tab and then click the  “Properties” button. 
 
 
 

 40
7.Click the
 “Driver” tab.   
 
8. Open the Update Driver Software-Gener ic PnP Monitor window by clicking on “Update Driver... “and then 
click the  Browse my computer for driver software  button.  
 
 
9. Select  Let me pick from a list of  device drivers on my computer .