AOC E2250swdn User Manual

							 31 
4 
 
Press   or   to adjust. 
 
5 
 
Press  to exit. 
 
 
 
 
 
 
 
 
 
Input Select Analog Select Analog Sigal Source as Input 
Auto Config  yes or no  Auto adjust the picture to default  
Off timer 0-24hrs Select DC off time 
Image Ratio wide or 4:3 Select wide or 4:3 format for display  
DDC-CI yes or no Turn ON/OFF DDC-CI Support 
Reset Yes or no Reset the menu to default 
Information   Show  the  information  of  the  main  image  and 
sub-image source  
 
 
 
 
						

							 32 
Exit 
1  
 
Press  (Menu) to display menu. 
 
2 
 
Press  or  to select  (Exit), and press to enter. 
 
3 
 
Press  to exit 
 
 
 
 
 
Exit   Exit the main OSD  
 
						

							 33 
LED Indicator 
 
Status 
 
LED Color 
 
 
 
Full Power Mode 
 
 
Green or Blue  
 
 
 
 
Active-off Mode 
 
 
Orange or red  
 
 
 
						

							 34 
Driver 
Monitor Driver 
 
Windows 7 
1.Start Windows® 7 
 
2.Click on the Start button and then click on Control Panel. 
 
 
3. Click on the Display icon. 
 
 
 
						

							 35 
4.Ckick on the “Change display settings” button.  
 
 
5.Click the “Advanced Settings” button.  
 
 
6.Click the “Monitor” tab and then click the “Properties” button. 
 
 
 
						

							 36 
7.Click the “Driver” tab.  
 
8. Open the Update Driver Software-Generic PnP Monitor window by clicking on “Update Driver... “and then 
click the Browse my computer for driver software button.  
 
 
9. Select Let me pick from a list of device drivers on my computer.  
 
 
 
						

							 37 
10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory:  
X:\Driver\module name  (where X is the drive letter designator for the CD-ROM drive). 
 
  
11. Select the xxx.inf file and click the “Open” button. Click the “OK” button.  
 
12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk 
drive.  
 
13. Close all open windows and remove the CD.  
 
14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color 
Matching Profiles.  
 
 
 
 
 
 
 
 
 
						

							 38 
Windows Vista 
 
1. Click Start  and Control Panel. Then, double-click on Appearance and Personalization. 
    
  
2. Click Personalization and then Display Settings. 
   
 
3. Click Advanced Settings.... 
    
 
 
						

							 39 
4. Click Properties in the Monitor tab. If the Properties button is deactivated, it means the configuration for your 
monitor is completed. The monitor can be used as is. 
If the message Windows needs... is displayed, as shown in the figure below, click Continue. 
   
 
5. Click Update Driver... in the Driver tab.  
   
 
6. Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers 
on my computer. 
 
 
7. Click on the Have disk... button, then click on the Browse... button and then select the appropriate drive 
F:\Driver (CD-ROM Drive).  
8. Select your monitor model and click on the Next button. 
9. Click Close → Close → OK → OK on the following screens displayed in sequence.
 
						

							 40 
Windows XP 
 
1. Start Windows® XP  
2. Click on the Start button and then click on Control Panel.  
 
 
3. Select and click on the category „Appearance and Themes‟ 
 
 
4. Click on the Display Item.