AOC E2237fwh User Manual

							
 
 31
 OSD Setup   
  
H.Position   0-100   Adjust the h orizontal posit ion of 
OSD 
V.Position   0-100  
Adjust the vertical position of OSD 
Timeout    5-120  Adjust the OSD Timeout   
Transparence 
0-100  Adjust the transparence of OSD 
Language  
  Select the OSD language   
LED Desk 
Light 0-100 
Adjust the luminance of light bar 
 
						

							
 
 32
Extra 
Press   (Menu) to display menu. 
Press  to 
select 
 (OSD  Setup); and press 
 to  enter. 
Press   (Up/Down) to select submenu, 
and press 
 (Lef t /Right) to adjust. 
Press  to  exit. 
 
(Left/Right/Up/Down)
 
						

							
 
 33
 Input Select 
Auto 
Select to Auto Detect input signal 
Analog  Select Analog Signal Source as Input 
DVI Select Analog Signal Source as Input 
Auto Config    yes or no    Auto adjust the picture to default   
Image Ratio  wide or 4:3 Select wide or 4:3 format for display   
DDC-CI  yes or no  Turn ON/OFF DDC-CI Support 
Off Timer 0~24hours  Select timing to turn off the monitor. 
Information  
  Show t he infor mation of the main ima ge a nd 
sub-image source   
 
						

							
 
 34
Reset 
 
 
Press   (Menu) to display menu. 
Press  to  select 
 (OSD  Setup);  and press  to  enter. 
Press   (Left/Right) to select YES or 
NO. 
Press  to  exit. 
 
(Left/Right/Up/Down) 
 
						

							
 
 35
 Reset    yes or no 
Reset the menu to default   
 
 
						

							
 
 36
Exit 
 
 
 
  Exit      
Exit the main OSD   
 
Press   (Menu) to display menu. 
Press  to  select 
 (OSD 
Setup); and press  to  enter. 
 
(Left/Right/Up/Down) 
 
						

							
 
 37
LED Indicator 
 
Status  
LED Color 
 
 
 
 
 
 
Full Power Mode   
 
 
 
 
Blue 

 
 
 
 
 
Active-off Mode   
 
 
 
 
Orange  
 
 
						

							
 
 38
Driver 
Monitor Driver 
Windows 7 
1.Start Windows® 7 
 
2.Click on the Start button and then click on  Control Panel. 
 
 
3. Click on the  Display icon. 
 
4.Ckick on the  “Change display settings”  button.
  
 
 
						

							
 
 39
5.Click the “Advanced Settings” button.  
 
 
6.
Click the  “Monitor”  tab and then click the  “Properties” button. 
 
 
7.Click the “Driver” tab.   
 
 
						

							
 
 40
8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on
 “Update Driver... “and then 
click the Browse my computer for driver software  button.  
 
 
9. Select  Let me pick from a list of  device drivers on my computer.  
 
 
10. Click the “Have Disk”  button. Click on the  “Browse” button and navigate to the following directory:   
X:\Driver\module name    (where X is the drive letter designator for the CD-ROM drive).