AOC E2236vwa User Manual

 
 41 
Windows Vista 
 
1. Click Start  and Control Panel. Then, double-click on Appearance and Personalization. 
    
  
2. Click Personalization and then Display Settings. 
   
 
3. Click Advanced Settings.... 
    
 
 

 
 42 
4. Click Properties in the Monitor tab. If the Properties button is deactivated, it means the configuration for your 
monitor is completed. The monitor can be used as is. 
If the message Windows needs... is displayed, as shown in the figure below, click Continue. 
   
 
5. Click Update Driver... in the Driver tab.  
   
 
6. Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers 
on my computer. 
 
 
7. Click on the Have disk... button, then...

 
 43 
Windows 7 
1.Start Windows® 7 
 
2.Click on the Start button and then click on Control Panel. 
 
 
3. Click on the Display icon. 
 
 
4.Ckick on the “Change display settings” button.  
 
 
 

 
 44 
5.Click the “Advanced Settings” button.  
 
 
6.Click the “Monitor” tab and then click the “Properties” button. 
 
 
7.Click the “Driver” tab.  
 
 

 
 45 
8. Open the Update Driver Software-Generic PnP Monitor window by clicking on “Update Driver... “and then 
click the Browse my computer for driver software button.  
 
 
9. Select Let me pick from a list of device drivers on my computer.  
 
 
10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory:  
X:\Driver\module name  (where X is the drive letter designator for the CD-ROM drive). 
 
  
 

 
 46 
11. Select the xxx.inf file and click the “Open” button. Click the “OK” button.  
 
12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk 
drive.  
 
13. Close all open windows and remove the CD.  
 
14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color 
Matching Profiles.  
 
 
 

 
 47 
i-Menu 
 
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on 
screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation 
guide.  
 

 
 48 
Troubleshoot 
 
Problem & Question 
 
Possible Solutions 
 
 
Power LED Is Not ON 
 
Make sure the power button is ON and the Power Cord is properly connected 
to a grounded power outlet and to the monitor.  
 
 
 
 
 
 
 
 
 
 
No images on the screen 
 
Is the power cord connected properly? 
Check the power cord connection and power supply. 
Is the cable connected correctly? 
(Connected using the D-sub cable) 
Check the DB-15 cable connection.   
(Connected using the DVI cable) 
Check the DVI...

 
 49 
 
 
 
 
Monitor Is Stuck In Active 
Off-Mode 
 
The Computer Power Switch should be in the ON position.  
The Computer Video Card should be snugly fitted in its slot.  
Make sure the monitors video cable is properly connected to the computer.  
Inspect the monitors video cable and make sure no pin is bent.  
Make sure your computer is operational by hitting the CAPS LOCK key on 
the keyboard while observing the CAPS LOCK LED. The LED should either 
turn ON or OFF after hitting the CAPS LOCK key....

 
 50 
Specification 
General Specification 
LCD Panel  
model name e2236Vwa 
Driving system  TFT Color LCD  
Viewable Image Size 54.7cm diagonal 
Pixel pitch  0.248mm(H) x 0.248mm(V) 
Video  R, G, B Analog lnterface & Digital Interface 
Separate Sync.  H/V TTL 
Display Color  16.7M Colors  
Dot Clock  148.5 MHz  
Resolution  
Horizontal scan 
range  30 kHz - 80 kHz 
Horizontal scan 
Size(Maximum)  476.64mm 
Vertical scan range  55 Hz - 75 Hz  
Vertical scan 
Size(Maximum)  268.11mm  
Optimal preset...