AOC 2236swa User Manual

- 21 - 
 
 
7. Click on the Driver tab and then click on Update Driver... button.  
 
 
8. Select the Install from a list or specific location [advanced] radio button and then click on the Next button.  
 
 
 
 

- 22 - 
9. Select the Dont Search. I will choose the driver to install radio button. Then click on the Next button.  
 
 
10. Click on the Have disk... button, then click on the Browse... button and then select the appropriate drive 
 F: (CD-ROM Drive).  
 
 
11. Click on the Open button, then click the OK button.  
12. Select your monitor model and click on the Next button. 
- If you can see the has not passed Windows® Logo testing to verify its compatibility with Windows® XP message 
, please click on...

- 23 - 
Windows Vista 
1. Click Start  and Control Panel. Then, double-click on Appearance and Personalization. 
 
 
2. Click Personalization and then Display Settings. 
 
 
3. Click Advanced Settings.... 
 
 
4. Click Properties in the Monitor tab. If the Properties button is deactivated, it means the configuration 
 for your monitor is completed. The monitor can be used as is. 
If the message Windows needs... is displayed, as shown in the figure below, click Continue. 
 

- 24 - 
 
 
5. Click Update Driver... in the Driver tab.  
 
 
6. Check the Browse my computer for driver software checkbox and click Let me pick from a list of  
device drivers on my computer. 
 
 
7. Click on the Have disk... button, then click on the Browse... button and then select the appropriate drive  
F:\Driver (CD-ROM Drive).  
8. Select your monitor model and click on the Next button. 
9. Click Close → Close → OK → OK on the following screens displayed in sequence. 
 

- 25 -  i-MENU 
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen 
menus instead of the OSD button on the monitor. Please click here to setup the software. To complete installation, 
please follow the installation guide .  
 
 
                       
                       
 
 
 
 
 
 
 
 
 
 

- 26 - 
           PRODUCT INFORMATION 
Specifications 
model name 2236Swa 
Driving system  TFT Color LCD  
Viewable Image Size 547mm diagonal 
Pixel pitch  0.248mm(H) x 0.248mm(V) 
Video  R, G, B Analog lnterface & Digital Interface 
Separate Sync.  H/V TTL 
Display Color  16.7M Colors  
LCD Panel  
Dot Clock  148.5 MHz  
Horizontal scan range  30 kHz - 80 kHz 
Horizontal scan 
Size(Maximum)  476.64mm 
Vertical scan range  55 Hz - 75 Hz  
Vertical scan 
Size(Maximum)  268.11mm  
Optimal preset...

- 27 - 
Preset Display Modes  
 
STAND RESOLUTION  HORIZONTAL  
FREQUENCY(kHZ) 
VERTICAL  
FREQUENCY(Hz) 
VGA 640×480 @60Hz 31.469  59.940  
VGA 640×480 @67Hz  35.000  66.667  
VGA 640×480 @72Hz  37.861  72.809  
VGA 640×480 @75Hz  37.500  75.000  
Dos-mode 720×400 @70Hz  31.469  70.087  
SVGA 800×600 @56Hz  35.156  56.250  
SVGA 800×600 @60Hz  37.879  60.317  
SVGA 800×600 @72Hz 48.077  72.188  
SVGA 800×600 @75Hz  46.875  75.000  
SVGA 832×624 @75Hz  49.725  74.550  
XGA 1024×768 @60Hz   48.363  60.004...

- 28 - 
PLUG & PLAY 
Plug & Play DDC2B Feature 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. 
 It allows the monitor to inform the host system of its identity and, depending on the level of DDC used,  
communicate additional information about its display capabilities. 
The DDC2B is a bi-directional data channel based on the I
2C protocol. The host can request EDID information 
 over the DDC2B channel....

- 29 - 
TROUBLESHOOT 
 
                           
Problem & Question Possible Solutions 
Power LED Is Not ON • Make sure the power button is ON and the Power Cord is properly connected to 
a grounded power outlet and to the monitor.  
No images on the screen 
 Is the power cord connected properly? 
  Check the power cord connection and power supply. 
 Is the cable connected correctly? 
  
(Connected using the D-sub cable) 
Check the DB-15 cable connection.   
(Connected using the DVI cable) 
Check the...

- 30 - 
keyboard while observing the CAPS LOCK LED. The LED should either turn ON 
or OFF after hitting the CAPS LOCK key.  
Missing one of the primary colors 
(RED, GREEN, or BLUE) 
• Inspect the monitors video cable and make sure that no pin is damaged.  
• Make sure the monitors video cable is properly connected to the computer.  
Screen image is not centered or 
sized properly • Adjust H-Position and V-Position or press hot-key (AUTO).  
Picture has color defects (white 
does not look white) • Adjust...