AOC 2217pwc User Manual

 
  
Full Enhance:    When Full Enhance is turned on, the color satur ation of the entire screen is fully enriched, thus all colors become more vibrant.  
 
   
  
Nature Skin:    When Natural Skin is turned on, the red and yel low colors are enriched automatically, thus present s human skin with more natural and truer colors. 
Natural Skin setting is ideal for viewing human p ortrait and detailed skin texture.  
   

 
   
  
Green Field:     When Green Field is turned on, the green colo r is enriched so that football field and mountain landscape would look more natural and fresh. “Green  Field” 
setting is ideal for watching mountain scenery and  outdoor sports.  
 
   
   
Sky Blue:    WhenSky Blue is turned on, the color blue is b eing fine-tuned so that the sky or ocean landscape  will look more vivid and in-depth. Sky Blue setting is ideal 
for viewing sky and ocean images.  
   

 
   
   
Auto Detect:     When “Auto Detect” is turned on, every pigment w ill be detected and self-adjusted to render a lively picture.   
   
  
Demo:     Screen divided into two for demonstration purpo ses.  
     
2) How to use Picture Boost?   
Users can change the color settings of a self-selec ted zone on the screen. The size and position of th e selected zone can also be adjusted. Picture Boos t is located in the 
fifth icon labeled Picture Boost in the OSD menu.  Turn on Bright Frame to select...

 
 
   
Disclaimer:  DCB aftereffects are subject to the resolution and  quality of the display content, hence may look different than the above illustrations.  
  
DCR Adjustment
  
 
   
What is DCR?   
Dynamic Contrast Ratio (DCR) auto adjusts the brigh tness of the screen so users can see the darker areas of the displayed content in more depths. By increasing the 
darkness of the dark areas and the brightness of th e bright areas, contrast ratio is uplifted to exceed 2000:1. DCR value varies subject...

 
 
   
DCR Demos:  
 
Disclaimer:  DCR aftereffects are subject to the resolution and  quality of the display content, hence may look different than the above illustrations.  
Function Control Illustration
 Luminance  
Adjust Range  
Description  
Brightness  
0-100  
Backlight Adjustment  
Contrast  
0-100  
Contrast from Digital-register. 
Standard 
Standard Mode  
 
Eco mode   
Text 
Text Mode 
   

Internet 
Internet Mode 
Game 
Game Mode  
Movie 
Movie Mode 
  
Sports 
Sports Mode 
Gamma1 
Adjust to Gamma1 
Gamma2 
Adjust to Gamma 2 
Gamma  
Gamma3 
Adjust to Gamma 3  
Off 
Disable dynamic contrast ratio 
 
DCR  
On 
Enable dynamic contrast ratio 
Image Setup  
 
 
Clock  
0-100  
Adjust picture Clock to reduce Vertical-Line noise.  
Focus  
0-100  
Adjust Picture Phase to reduce Horizontal-Line nois e  
H.Position  
0-100  
Adjust the verticalposition of the picture.  
 
V.Position  
0-100...

OSD Setup  
 
 
H.Position  
0-100  
Adjust the verticalposition of OSD 
V.Position  
0-100  
Adjust the horizontal position of OSD 
Timeout  
0-100  
Adjust the OSD Timeout  
 
Language  
 
Select the OSD language  
Extra  
 
 
Digital 
Select Digital Sigal Source as Input 
Input Select 
Analog 
Select Analog Sigal Source as Input 
Auto Config  
yes or no  
Auto adjust the picture to default  
Reset  
yes or no 
Reset the menu to default  
DDC-CI 
  
Turn ON/OFF DDC-CI Support 
 
Information  
 
Show...

9. Click on the Open button, then click on the OK button.  
10. Select your monitor model and click on the Nex t button.  
11. Click on the Finish button then the Close b utton.  
If you can see the Digital Signature Not Found wi ndow, click on the Yes button.  
Windows ME
 
1. Start Windows® Me   
2. Click on the Start button, point to Settings , and then click on Control Panel.  
3. Double click on the Display Icon.   
4. Select the Settings tab then click on Advance d....  
5. Select the Monitor...

13. Click on the Finish button then the Close button.  
14. Click on the OK button and then the OK butt on again to close the Display_Properties dialog box .  
Windows Vista
 
1. Start Windows® Vista  
2. Click the Start button; select and click on Con trol Panel. 
3. Select and click on Hardware and Sound 
4. Choose Device Manager and Click on Update dev ice drivers. 
5. Select Monitor and then right click on Generi c PnP Monitor. 
6. Click on Update Driver Software.  
7. Select Browse my computer for...

· 
The Computer Video Card should be snugly seated in  its slot.  
· 
Make sure the monitors video cable is properly con nected to the computer.  
· 
Inspect the monitors video cable and make sure non e of the pins are bent.  
· 
Make sure your computer is operational by hitting t he CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or  OFF after hitting the CAPS LOCK key.  
Missing one of the primary colors (RED, GREEN, or BLUE) 
· 
Inspect the monitors video...