Anschutz LaserPower II Set Fault diagnosis User Manual
Have a look at the manual Anschutz LaserPower II Set Fault diagnosis User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 28 Anschutz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Fault Possible cause Remedy Rifle: No laser spot Batteries too low Replace batteries Laser actuator defective Send for repair Laser not exactly on target Laser not aligned correctly Send for alignment Trigger does not release Trigger not cocked Cock the LaserPower Trigger safety engaged Release trigger safety Biathlon target: Laser hits but target does not light upTarget not switched on Switch on target LO (Low battery) appears in displayReplace batteries Batteries are flat When operating with plug-in power unitConnect power Replace plug-in power unit Target does not respond with every shotLO (Low battery) appears in displayReplace batteries Batteries are flat Original plug-in power unit being used?Use original plug-in power unit Remote control: Range too short Batteries low Replace batteries Does not even function close in Send both remote control and biathlon target for repair Fault diagnosis on the LaserPower II Set Important: When operating with a plug-in power unit, only use the unit supplied with the set [19], as otherwise damage to the biathlon target can occur!