Anetsberger Brothers 14Inch Gas Fryer SLG50 14 SilverLine Spec Sheet

							 
 
14” TUBE FIRED GAS FRYER 
STANDARD SPECIFICATIONS 
 
CONSTRUCTION 
 
 Welded stainless steel tank with an extra smooth 
peened finish ensures easy cleaning. 
 Long lasting, high temperature alloy stainless 
steel baffles are mounted in the heat exchanger 
elliptical tubes to provide maximum  
heating and combustion efficiency. 
 Elliptical heat tubes have more surface area and will 
provide greater heat transfer. 
 Standing pilot light design provides a ready flame 
when heat is required. 
 Stainless steel front and door, galvanized steel sides 
and back. 
 Fully lined door that will keep outer door at a cooler 
temperature. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MODELS  
 SLG50 Natural 40-50 lbs 120Kbtu/hr (35 kW) (127 MJ) 
 
 
SLG50 Propane 40-50 lbs 120Kbtu/hr (35 kW) (127 MJ) 
 
MODEL 
SLG50
 
14” Tube Fired Gas Fryer
STANDARD ACCESSORIES 
 2 Twin nickel plated baskets 
 Rack type basket support 
 6” (15.2 cm) adjustable legs 
 Drain pipe extension 
 Flue extension/Diverter 
 Battery operated spark ignitor 
 1 year Parts and Labor  CONTROLS 
 
 Thermostat maintains selected temperature automatically 
between 200°F (93°C) and 400°F (204°C). 
 Integrated gas control valve acts as a manual  
valve, and pilot valve, automatic pilot valve, gas  
filter, pressure regulator, and automatic main valve. 
 Gas control valve prevents gas flow to the main 
burner until pilot is established. Shuts off all  
gas flow automatically if the pilot flame goes out. 
 Temperature limit switch safely shuts off all gas flow  
if the fryer temperature exceeds the upper limit of 450°F 
(232°F). 
 OPERATIONS 
 
 Front 1-1/4” NPT drain valve, for quick 
draining 
OPTIONS & ACCESSORIES 
(AT ADDITIONAL COST)  
 Single or triple baskets 
 6” (15.2 cm) adjustable casters 
 Fryer cover 
 Side splash shield 
 Tank channel strip 
 
ANETS INC PO BOX 501, CONCORD, NH  03302-0501 
509 ROUTE 3A, BOW, NH 03304  TEL: 603-225-6684, FAX:603-225-8497 
L10-366  R4     www.anets.com 
We reserve the right to change specifications without notice and without incurring any 
Obligation for equipment previously or subsequently sold. 
  
						

							 
 
14” TUBE FIRED GAS FRYER 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MODEL 
SLG50 
ANETS INC PO BOX 501, CONCORD, NH  03302-0501 
509 ROUTE 3A, BOW, NH 03304  TEL: 603-225-6684, FAX:603-225-8497 
L10-366  R4     www.anets.com 
We reserve the right to change specifications without notice and without incurring any 
Obligation for equipment previously or subsequently sold. 
 
Model
SLG50
Shipping Crate  Siz e  H x W x L
Rear min.
Do not bloc k  / restrict flue gas es  from flowing into 
hood or ins tall vent hood drains over the flue.
6 (15.2c m ) 6 (15.2c m ) 0 0120,000 BTUs        
(35 kW ) (127 MJ)4 W .C.                  
(10 m bars  / 1 kPa)10 W .C.              
(25 m bars  / 2.5 kPa) 3-1/2 in         
(8.9 cm)40 - 50 Lbs       
(18 - 23 kg)Gas Input Rate / Hr
46 x 19 x 36 in   (116.8 X 48.3 X 91.4 c m ) 
18.2 ft
3. (0.5m3 )  
Frye r Flue Area Combustible material Non-Combustible material 135 Lbs  (61 kg)                      
Floor min.CLEARANCES INDIVIDUAL FRYER SPECIFICATIONS
FRYER SHIPPING INFORMATION 
(Approximate)
Shipping We ightBurne r Pre ssure  LP Burner Pressure Nat Oil Capacity Cook Depth Frying Are a
Shipping Cube 14  x 14-5/8 in    
(35.6 x 37.1 c m )
SHORT FORM SPECIFICATION
Provide SLG50 tube-fired gas fry ers.  Fryer shall have an atmospheric burner system c ombined with stainless steel tubes 
utilizing high temperature alloy  stainless steel baffles.  Fryer shall have a deep c ool zone; minimum 20% of total oil capac ity. 
Fr y er c ooking ar ea shall be 14 x 14-5/8 (35.6 x 37.1 c m) with a c ooking depth of 3-1/2 (8.9 c m) .  Heat transfer  area shall be a 
minimum of 863 square inc hes (5567 sq c m).
TYPICAL APPLICATION
Frying a wide variety of foods  in a lim ited am ount of s pac e.  Frying that requires  a m edium  volum e produc tion rate. Front min.
30              
(76.2 c m )
6           
(15.3 cm)Side s min. Re ar min. Side s min.