Anaheim Stepper MBL600 Users Guide
Here you can view all the pages of manual Anaheim Stepper MBL600 Users Guide. The Anaheim manuals for Stepper are available online for free. You can easily download all the documents as PDF.
Page 1
January 2013 L010067 MBL600 Bilevel Step Motor Driver User’s Guide 910 East Orangefair Lane, Anaheim, CA 92801 e-mail: [email protected](714) 992-6990 fax: (714) 992-0471 website: www.anaheimautomation.com ANAHEIM AUTOMATION
Page 2
January 2013 L010067 General Description The ANAHEIM AUTOMATION MBL600 is an improved version of the MBL628-B series step motor drivers. The MBL600 with it compactness and attractive rugged package style employs bilevel (or dual voltage) drive technique for high performance operation of step motors providing signifi cantly improved motor speed torque output. New features include selectable “+” or “-” going clock inputs, transient voltage protection, and improved Full-step operation. Bilevel Drive...
Page 3
January 2013 L010067 Motor ON/OFF Option The Motor ON/OFF option allows de-energizing a motor without disturbing the positioning logic. After reenergizing the motor, a routine can continue. This reduces motor heating and conserves power, es- pecially in applications where motors are stopped for long periods and no holding torque is required. Motor Connections Hookup diagrams for a motor driver application are presented in Figure 3 and 4. Wiring connected to input must be separated from motor...
Page 4
January 2013 L010067 Jumper Functions/Locations Function JP1 JP2 Terminal 5 = Direction 2 - 3 X Terminal 5 = CCW 1 - 2 X Positive Going Clocks X 2 - 3 Negative Going Clocks X 1 - 2 Standard Product 2 - 3 2 - 3 Torque Speed Curves Torque curves are shown on the back of this specifi cation sheet. This data was obtained using a high voltage (Vhv) of approximately 60VDC no load. The low voltage (Vlv) used was an unregulated voltage of about 5VDC no load. Both voltages dropped when loaded. To obtain more...
Page 5
January 2013 L010067 Wiring Diagrams
Page 6
January 2013 L010067 Specifi cations Control Inputs: TTL-Compatible Logic “0” - 0 to 0.8V Logic “1” - 3.5 to 5.0V Clock Inputs: (Terminals 5 & 6) Pulse Required; 15 microseconds minimum. The clock input is pulled up internally to +5VDC through a 10K Ù resistor for negative going clock inputs or pulled down to 0VDC through a 10K Ù resistor for posi- tive going clock inputs. Direction Control: (Terminal 5) Logic “1” (open) - Clockwise Logic “0” - Counterclockwise Excitation Mode Select: (Terminal 8)...
Page 7
January 2013 L010067 ANAHEIM AUTOMATION COPYRIGHT Copyright 2013 by Anaheim Automation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Anaheim Automation, 910 E. Orangefair Lane, Anaheim, CA 92801. DISCLAIMER Though every effort has been made to...