Home > Anaheim > Stepper > Anaheim Stepper MBC25P22 Spec Sheet

Anaheim Stepper MBC25P22 Spec Sheet

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Anaheim Stepper MBC25P22 Spec Sheet online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 523 Anaheim manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							FEATURES
DIMENSIONS
910 East Orangefair Ln.  Anaheim, CA 92801     Tel. (714) 992-6990     Fax. (714) 992-0471     www.anaheimautomation.com
DESCRIPTION
Anaheim Automation has developed a step motor driver specifi cally for the feed-conveyor in-
dustry, where high motor speed and precise synchronization is required.  Anaheim Automa-
tion’s engineers have incorporated two driver chips to eliminate the load-sharing issues that 
typically slowed down motors in earlier designs.  This design enables the motors to be run at 
50% higher speeds than our earlier designs with no additional cost.  The MBC25P22 micro-
step driver/pulse generator has and output current capability of 0.5A minimum to 2.5 maxi-
mum (peak rating).  The MBC25P22 driver operates with a DC voltage of 12VDC to 35VDC.  
The MBC25P22’s internal PG (pulse generator) has two different programmable motion pro-
fi les and an optional analog input for a potentiometer or equivalent input to control the maxi-
mum speed.  The MBC25P22 has various step resolutions that range from 200 steps/rev to 
1600 steps/rev.  The biopolar drive confi guration handles 4, 6 and 8 lead step motors and 
is also equipped with short circuit, over temperature and crossover current protection.  The 
MBC25P22 communicates via RS232 communication.  The easy to use Windows software, 
SMPG20WIN, is use to directly set up the two different motion profi les..
L010142
MBC25P22 Programmable Pulse Generator/
DriverMBC25P22 Programmable Pulse Generator/
Driver
• 2.5A Peak Output Current Per Driver
• 200 to 1600 Steps/Revolution (1, 2, 4 and 8 Selectable                            
  Step Operation)
• Drives Two Motors
• On-Board Programmable Pulse Generator
• Pulse From 152Hz to 50,000Hz
• Analog Potentiometer Input for Maximum Speed
• Clock Output for Daisy Chaining
• Busy Output
• Motor On/Off Input and Automatic Current Reduction
• Short Circuit Protection
    Add page 2 to Favourites
    image text
    Enable zoom 
    							WIRING DIAGRAM
910 East Orangefair Ln.  Anaheim, CA 92801     Tel. (714) 992-6990     Fax. (714) 992-0471     www.anaheimautomation.com
SPECIFICATIONS
Power Requirements: 12-35VDC
Output Current Range: TA = 25° C
0.5 - 2.5A Peak
Clock Out Frequency: (P1, 
Pin 6)152Hz - 50Hz
Driver Chopping Fre-
quency:25kHz - 30kHz
Operating Temperature: 0° C to 70° C
Model # Description
MBC25P22 Dual 2.5A Microstep Driver with integrated Programmable Pulse Generator
PSAM24V2.7A Power Supply for MBC25P22 ([email protected])
CON-6404289 Optional 9 pin connector, 0.156” IDC (AMP part no. 640428-9)
AA9MFC-6 6 foot serial communication cable, Male to Female
ORDERING INFOMATION
    All Anaheim manuals Comments (0)

    Related Manuals for Anaheim Stepper MBC25P22 Spec Sheet