Home > Anaheim > Stepper > Anaheim Stepper MBB4502175 Users Guide

Anaheim Stepper MBB4502175 Users Guide

Add to Favourites
    Download as PDF

    View the Anaheim Stepper MBB4502175 Users Guide for free. All the Anaheim manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 August 2001 MBB45021-75 Enhanced Step Motor Driver User’s Guide #L010052 910 East Orangefair Lane, Anaheim, CA 92801 e-mail: info@anaheimautomation.com(714) 992-6990 fax: (714) 992-0471 website: www.anaheimautomation.com ANAHEIM AUTOMATION
    Page 2 User’s Guide # MBB45021-75 MBB45021-75 Enhanced Driver Features • 1.0-4.5 Amperes/Phase Operating Current • Enhanced Torque/Speed Output • Improved Start-Stop Speeds • Short Circuit Protection • Open Motor Wire Detection • No RFI or EMI Problems • Requires 17-28 VAC or 24-40 VDC • TTL-CMOS Compatible Inputs • Receives Positive or Negative Going Clocks • Full Step or Half Step Operation • Motor Turn Off Provisions • Enclosed Modular Package General Description The Anaheim Automation MBB45021-75 is a...
    Page 3 August 2001 Motor Connection Refer to the hookup diagram for typical driver applications. Wiring connected to inputs must be separated from motor connections and all other possible sources of interference. Important Note: When the wiring from the driver to the step motor extends beyond 25 feet, consult the factory. Current Adjust Setting (CUR. ADJ.) The potentiometer R7 is used to set the motor current. The pot should be set according to the motor’s rated current. This will produce a kick current of 1.4...
    Page 4 User’s Guide # MBB45021-75 Low Voltage Adjust (VLV ADJ.) The potentiometer R26 is used to set the motor low voltage (VLV) supply which furnishes the current necessary for holding (standstill) torque and low-speed running torque. Higher values for the low voltage will produce more holding and low-speed torque. A proper VLV will produce a standstill current that is 65 to 100% of the rated motor current (i.e. for a motor rated at 1 Amp, VLV should be set so that the standstill current is 0.65 to 1 Amps. r o...
    Start reading Anaheim Stepper MBB4502175 Users Guide

    Related Manuals for Anaheim Stepper MBB4502175 Users Guide

    All Anaheim manuals