Anaheim Stepper DPY50601 Users Guide
Have a look at the manual Anaheim Stepper DPY50601 Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 523 Anaheim manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 41
September 2012 L01019541
/ - Thumbwheel Index Enabled
Format: /[0 or 1]
Description: This command will either enable or disable the ability to use the thumbwheel
switches for indexing. If enable, SW2 must be in the TWS position for the thumbwheel to
be connected to the processor.
: - Analog Position Enabled
Format: :[0 or 1]
Description: This command will either enable or disable input 1 to be used to set the analog
position. To enable the function, use a 1. To disable the function use a 0....](http://img.usermanuals.tech/thumb/413/6013/w64_stepper-dpy50601-users-guide-1478880301_d-40.png "Page 41
September 2012 L01019541
/ - Thumbwheel Index Enabled
Format: /[0 or 1]
Description: This command will either enable or disable the ability to use the thumbwheel
switches for indexing. If enable, SW2 must be in the TWS position for the thumbwheel to
be connected to the processor.
: - Analog Position Enabled
Format: :[0 or 1]
Description: This command will either enable or disable input 1 to be used to set the analog
position. To enable the function, use a 1. To disable the function use a 0....")
![Page 42
September 2012 L01019542
^ - Number of Outputs During Output on the Fly
Format: ^[value]
Description: This command sets the number of times output 1 will turn on during an output
on the fl y move. This command is used in conjunction with the output on the fl y enabled “(“
command.
Range: 0 - 255
{ - Analog Position Lower Limit
Format: {[value]
Description: This command sets the lower limit that is used during the calculation follow-
ing a P command for the analog position input. This command is...](http://img.usermanuals.tech/thumb/413/6013/w64_stepper-dpy50601-users-guide-1478880301_d-41.png "Page 42
September 2012 L01019542
^ - Number of Outputs During Output on the Fly
Format: ^[value]
Description: This command sets the number of times output 1 will turn on during an output
on the fl y move. This command is used in conjunction with the output on the fl y enabled “(“
command.
Range: 0 - 255
{ - Analog Position Lower Limit
Format: {[value]
Description: This command sets the lower limit that is used during the calculation follow-
ing a P command for the analog position input. This command is...")
![Page 50
September 2012 L01019550
Appendix 1: ASCII Table for Direct Mode
ASCII Symbol Hex Value ASCII Symbol Hex Value ASCII Symbol Hex Value
0 30 J 4A # 23
1 31 K 4B $ 24
2 32 L 4C % 25
3 33 M 4D “ 27
4 34 N 4E ( 28
5 35 O 4F + 2B
6 36 P 50 , 2C
7 37 Q 51 - 2D
8 38 R 52 . 2E
9 39 S 53 : 3A
A 41 T 54 ; 3B
B 42 U 55 @ 40
C 43 V 56 [ 5B
D 44 W 57 ] 5D
E 45 X 58 ^ 5E
F 46 Y 59 { 7B
G 47 Z 5A } 7D
H 48 Carriage Return 0D ~ 7E
I49!21
Appendix 2: Firmware Revisions
Versions 1.00 - Initial Release.
Versions 1.10 -...](http://img.usermanuals.tech/thumb/413/6013/w64_stepper-dpy50601-users-guide-1478880301_d-49.png "Page 50
September 2012 L01019550
Appendix 1: ASCII Table for Direct Mode
ASCII Symbol Hex Value ASCII Symbol Hex Value ASCII Symbol Hex Value
0 30 J 4A # 23
1 31 K 4B $ 24
2 32 L 4C % 25
3 33 M 4D “ 27
4 34 N 4E ( 28
5 35 O 4F + 2B
6 36 P 50 , 2C
7 37 Q 51 - 2D
8 38 R 52 . 2E
9 39 S 53 : 3A
A 41 T 54 ; 3B
B 42 U 55 @ 40
C 43 V 56 [ 5B
D 44 W 57 ] 5D
E 45 X 58 ^ 5E
F 46 Y 59 { 7B
G 47 Z 5A } 7D
H 48 Carriage Return 0D ~ 7E
I49!21
Appendix 2: Firmware Revisions
Versions 1.00 - Initial Release.
Versions 1.10 -...")
September 2012 L01019551 ANAHEIM AUTOMATION COPYRIGHT Copyright 2012 by Anaheim Automation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Anaheim Automation, 910 E. Orangefair Lane, Anaheim, CA 92801. DISCLAIMER Though every effort has been made to supply complete and accurate information in this manual, the contents are subject to change without notice or obligation to inform the buyer. In no event will Anaheim Automation be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation. Anaheim Automation’s general policy does not recommend the use of its’ products in life support applications wherein a failure or malfunction of the product may directly threaten life or injury. Per Anaheim Automation’s Terms and Conditions, the user of Anaheim Automation products in life support applications assumes all risks of such use and indemnifi es Anaheim Automation against all damages. LIMITED WARRANTY All Anaheim Automation products are warranted against defects in workmanship, materials and construction, when used under Normal Operating Conditions and when used in accordance with specifi cations. This warranty shall be in effect for a period of twelve months from the date of purchase or eighteen months from the date of manufacture, whichever comes fi rst. Warranty provisions may be voided if products are subjected to physical modifi cations, damage, abuse, or misuse. Anaheim Automation will repair or replace at its’ option, any product which has been found to be defective and is within the warranty period, provided that the item is shipped freight prepaid, with previous authorization (RMA#) to Anaheim Automation’s plant in Anaheim, California. TECHNICAL SUPPORT If you should require technical support or if you have problems using any of the equipment covered by this manual, please read the manual completely to see if it will answer the questions you have. If you need assistance beyond what this manual can provide, contact your Local Distributor where you purchased the unit, or contact the factory direct.