Anaheim Discounted Package PKG342MBC12PSCBL User Manual
Here you can view all the pages of manual Anaheim Discounted Package PKG342MBC12PSCBL User Manual. The Anaheim manuals for Discounted Package are available online for free. You can easily download all the documents as PDF.
Page 1
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com PKG-342-MBC12-PS-CBL System Diagram and Specifications L010871 Sheet1 Page 1 0 18 36 54 72 90 108 126 144 162 180 0 105 210 315 420 525 630 735 840 945 1050 0 3 6 9 12 15 18 21 24 27 30 POWER (Watts) TORQUE (oz -in) SPEED (RPS) 34Y214S -LW8, MBC12101, PSA80V4A -1, Series, Div by 10 TORQUE POWER Included Components: 34Y214S-LW8-MS...
Page 2
FEATURES SPECIFICATIONS/DIMENSIONS 910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com The 34Y214S-LW8-MS High Torque Stepper Motor offers a great value without sacrificing quality. This motor was designed to offer the highest possible torque while minimizing vibration and audible noise. It is wired in series with a Molex 4 pin Mini-Fit Jr. receptacle. A 10 ft. 4 conductor, 18 AWG cable with mating 4 pin Mini-Fit Jr plug is...
Page 3
FEATURES DESCRIPTION 910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com If you’re looking for high performance in a small driver, the MBC12101 is your answer. This powerful microstepping driver provides excellent torque in a compact and low profile encloser . The MBC12101 is also very easy to use. It features rugged terminal blocks, a rotary pot for current settings, and a visible silkscreen for easy installation. The MBC12101...
Page 4
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com Optically Isolated Input Pin Descriptions The inputs of the MBC12101 are optically isolated with the anode (+) and cathode (-) both brought out to the user. With no current going through the opto-diode the input is considered high. To enable the input a minimum of 1.0mA needs to be sourced or sinked through the opto-diode. This is done simply by placing a voltage of +3.5 to +8.6 VDC...
Page 5
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com Reducing Output Current Reducing the output current occurs approximately 1 second after the last positive going edge of the step clock input. The amount of current per phase in the reduction mode is approximately 50% of the set current. Reducing the output current is accomplished when no current flows through the opto-diode at the CLOCK (+) and CLOCK (-) pins after...
Page 6
PSA80V4A-1 - Power Supply • Low Cost • High Reliability • Short Circuit • Overload Protection The PSA80V4A-1 power supply has a single 80V output, a voltage input of 115 or 220VAC, and power capabilities of up to 320 watts. With an unregulated output and a size of 8.30” x 4.25” x 2.81” and dual mounting position “L Bracket,” the PSA80V4A-1 can be mounted just about anywhere. The PKG-342-MBC12-PS-CBL includes two wires for powering the MBC12101. FEATURES DESCRIPTION DIMENSIONS/SPECIFICATIONS 910...