Anaheim Discounted Package PKG342MBC08PSCBL User Manual
Here you can view all the pages of manual Anaheim Discounted Package PKG342MBC08PSCBL User Manual. The Anaheim manuals for Discounted Package are available online for free. You can easily download all the documents as PDF.
Page 1
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com PKG-342-MBC08-PS-CBL System Diagram and Specifications L010872 Sheet1 Page 1 0 13 26 39 52 65 78 91 104 117 130 0 60 120 180 240 300 360 420 480 540 600 0 2 4 6 8 10 12 14 16 18 20 POWER (Watts) TORQUE (oz-in) SPEED (RPS) 34Y214S-LW8, MBC082561, PSA80V4A -1, Series Div by 8 TORQUE POWER Included Components: 34Y214S-LW8-MS Stepper...
Page 2
FEATURES SPECIFICATIONS/DIMENSIONS 910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com The 34Y214S-LW8-MS High Torque Stepper Motor offers a great value without sacrificing quality. This motor was designed to offer the highest possible torque while minimizing vibration and audible noise. It is wired in series with a Molex 4 pin Mini-Fit Jr. receptacle. A 10 ft. 4 conductor, 18 AWG cable with mating 4 pin Mini-Fit Jr plug is...
Page 3
FEATURES DESCRIPTION 910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com The MBC082561 Microstep Driver has an output current capability of 2.8 Amps minimum to 7.8 Amps maximum (Peak Rating). The MBC082561 driver operates on a DC voltage of 22-90 volts. The inputs are optically isolated with a minimum sourcing of 15.0 mA per input @ 5+VDC. The clock input is set to receive either positive or negative edge clocks...
Page 4
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com Pin # Description 1 Step Clock Input Anode (+): A positive going edge on this isolated input advances the motor one increment. The size of the increment is dependent of the Microstep Select Inputs of Switch 1. 2 Step Clock Input Cathode (-) 3 Direction Anode (+): This isolated input is used to change the direction of the motor . Physical direction also depends on the connection of...
Page 5
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com Setting the Output Current: The output current for the motor used when microstepping is determined differently from that of a full/half step unipolar driver. In the MBC082561, a sine/ cosine output function is used in rotating the motor. The output current for a given motor is determined by the motors current rating and the wiring configuration of the motor....
Page 6
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com ResolutionSteps/Rev Position 1Position 2 Position 3Position 4Auto Reduce Current 1 200 OFF ONONON Disabled 2 400 OFF ONONOFF Disabled 5 1000 OFF ONOFF ON Disabled 8 1600 OFF ONOFF OFF Disabled 10 2000 OFFOFF ONON Disabled 16 3200 OFFOFF ONOFF Disabled 32 6400 OFFOFFOFF ON Disabled 64 12800 OFFOFFOFFOFF Disabled 1 200 ONONONON Enabled 2 400 ONONONOFF Enabled 5 1000 ONONOFF ON...
Page 7
PSA80V4A-1 - Power Supply • Low Cost • High Reliability • Short Circuit • Overload Protection The PSA80V4A-1 power supply has a single 80V output, a voltage input of 115 or 220VAC, and power capabilities of up to 320 watts. With an unregulated output and a size of 8.30” x 4.25” x 2.81” and dual mounting position “L Bracket,” the PSA80V4A-1 can be mounted just about anywhere. The PKG-342-MBC08-PS-CBL includes two wires for powering the MBC12101. FEATURES DESCRIPTION DIMENSIONS/SPECIFICATIONS 910...