Anaheim Discounted Package PKG341MLACBL User Manual
Here you can view all the pages of manual Anaheim Discounted Package PKG341MLACBL User Manual. The Anaheim manuals for Discounted Package are available online for free. You can easily download all the documents as PDF.
Page 1
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com PKG-341-MLA-CBL System Diagram and Specifications L010884 Included Components: 34Y112S-LW8-MS Stepper Motor MLA10641 Stepper Driver CBL-18AWG-04C-010-MS Motor Cable PWR-10EMC1 Power Filter LIN-AA4254 Power Cord Sheet1 Page 1 0 40 80 120 160 200 240 280 320 360 400 0 60 120 180 240 300 360 420 480 540 600 0 5 10 15 20 25 30 35 40 45 50...
Page 2
FEATURES SPECIFICATIONS/DIMENSIONS 910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com The 34Y112S-LW8-MS High Torque Stepper Motor offers a great value without sacrificing quality. This motor was designed to offer the highest possible torque while minimizing vibration and audible noise. It is wired in series with a Molex 4 pin Mini-Fit Jr. receptacle. A 10 ft. 4 conductor, 18 AWG cable with mating 4 pin Mini-Fit Jr plug is...
Page 3
FEATURES DESCRIPTION 910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com The MLA10641 high-performance microstepping driver has an output current capability from 2.0 Amps minimum to 10.0 Amps maximum (peak rating). The MLA10641 driver operates with an AC voltage of 90-132 Volts. The inputs are optically isolated with a minimum sourcing of 7.0 mA per input (+5VDC minimum to +24VDC maximum). The clock input is set to receive...
Page 4
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com Pin #Description 1 Step Clock Input Anode (+): A positive going edge on this isolated input advances the motor by one increment. The size of the increment is dependent on the Microstep Select Inputs of the DIP switch. 2 Step Clock Input Cathode (-) 3 Direction Anode (+): This isolated input is used to change the direction of the motor. Physical direction also depends on the...
Page 5
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com Reducing Output Current Reducing the output current is accomplished by setting switch 1 of the DIP switch to the ON position. This should occur approximately 1 second after the last positive going edge of the step clock input. The amount of current per phase in the reduction mode is approximately 50% of the set current.The output current on the MLA10641 is set by...
Page 6
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com ResolutionSteps/Rev Position 1Position 2 Position 3Position 4Auto Reduce Current 1 200 OFF ONONON Disabled 2 400 OFF ONONOFF Disabled 5 1000 OFF ONOFF ON Disabled 8 1600 OFF ONOFF OFF Disabled 10 2000 OFFOFF ONON Disabled 16 3200 OFFOFF ONOFF Disabled 32 6400 OFFOFFOFF ON Disabled 64 12800 OFFOFFOFFOFF Disabled 1 200 ONONONON Enabled 2 400 ONONONOFF Enabled 5 1000 ONONOFF ON...