Home > Anaheim > Brushless DC > Anaheim Brushless DC MDCKB112008101 Spec Sheet

Anaheim Brushless DC MDCKB112008101 Spec Sheet

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Anaheim Brushless DC MDCKB112008101 Spec Sheet online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 523 Anaheim manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							FEATURES
DIMENSIONS
910 East Orangefair Ln.  Anaheim, CA 92801     Tel. (714) 992-6990     Fax. (714) 992-0471     www.anaheimautomation.com
DESCRIPTION
The MDCKB1-120081-01 driver is designed to drive DC Brushless Motors at currents up to 
8A (peak) and 160VDC.  Using hall sensor feedback, a varying velocity mode can be select-
ed.  The driver is protected against over current (cycle-by-cycle), hall sensor error and under 
voltage.  When an error occurs, a fault light is turned on to notify the user.  Included on the 
driver are internal potentiometer to control the maximum phase current allow in the motor, 
the maximum and base speed of the motor, and open-loop compensation.  In addition, an 
external potentiometer (5K) is used to control the speed.  The direction of the motor can be 
preset by the direction control input.  Other inputs to the drive include a run/stop and a motor 
enable input.  When using the run/stop input, it overrides all other inputs into the driver.
L010721
MDCKB1-120081-01 SeriesMDCKB1-120081-01 Series
• Maximum Current Limit Setting from 2-8Amps 
  Peak
• External Potentiometer Speed Control
• 160VDC Motor Voltage Bus
• 2-Quadrant Operation
• Hall Sensor Feedback
• Varying Velocity Protection
• Short Circuit Protection
• Requires 85-135 VAC
• Selectable Ramp Up/Down
• Run/Stop, Freewheel and Direction Inputs
• RoHS Compliant
    Add page 2 to Favourites
    image text
    Enable zoom 
    							WIRING INFORMATION
910 East Orangefair Ln.  Anaheim, CA 92801     Tel. (714) 992-6990     Fax. (714) 992-0471     www.anaheimautomation.com
Power Requirements:
(TB4, Pins 1 and 2)85VAC (min) - 132AC(max)
Output Current Range:1.0 - 8.0 Amps Peak
0.5 - 4.0 Amps Continuous
Operating Temperature: Heat Sink 0° - 70°C
Hall Sensor Power Output:(6.25 @ 30mA maximum.  Typical current 
draw from hall sensor is 20mA.  All three Hall 
Sensor inputs are pulled through 20K ohm 
resistors.
Model # Description
MDCKB1-120081 110VAC DC Brushless Driver at 8A
MDCKB1-120081-01 110VAC Open Loop Only DC Brushless Driver at 8A
PWR-10EMC1 Dual Stage RFI Power Line Filter
SPECIFICATIONS
ADDITIONAL INFORMATION
    All Anaheim manuals Comments (0)

    Related Manuals for Anaheim Brushless DC MDCKB112008101 Spec Sheet